e1000e: avoid polling h/w registers during link negotiation
authorBruce Allan <bruce.w.allan@intel.com>
Thu, 17 Jun 2010 18:58:43 +0000 (18:58 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 23 Jun 2010 19:58:38 +0000 (12:58 -0700)
Avoid touching hardware registers when possible, otherwise link negotiation
can get messed up when user-level scripts are rapidly polling the driver to
see if/when link is up.  Use the saved link state information instead when
possible.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/e1000e/e1000.h
drivers/net/e1000e/ethtool.c
drivers/net/e1000e/netdev.c

index 328b7f4a07bc693159e0b92b4c432628113c155d..9ee133f5034ed021b20c5e8e9f77fca600f77f84 100644 (file)
@@ -461,7 +461,6 @@ extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
 extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
 extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
 extern void e1000e_update_stats(struct e1000_adapter *adapter);
-extern bool e1000e_has_link(struct e1000_adapter *adapter);
 extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
 extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
 extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
index db86850b1636e9dfe3e4ebc09809ad49e431d60d..77c5829ab945a3e70329a38204cf7289a32ddb07 100644 (file)
@@ -118,7 +118,6 @@ static int e1000_get_settings(struct net_device *netdev,
 {
        struct e1000_adapter *adapter = netdev_priv(netdev);
        struct e1000_hw *hw = &adapter->hw;
-       u32 status;
 
        if (hw->phy.media_type == e1000_media_type_copper) {
 
@@ -156,22 +155,29 @@ static int e1000_get_settings(struct net_device *netdev,
                ecmd->transceiver = XCVR_EXTERNAL;
        }
 
-       status = er32(STATUS);
-       if (status & E1000_STATUS_LU) {
-               if (status & E1000_STATUS_SPEED_1000)
-                       ecmd->speed = 1000;
-               else if (status & E1000_STATUS_SPEED_100)
-                       ecmd->speed = 100;
-               else
-                       ecmd->speed = 10;
+       ecmd->speed = -1;
+       ecmd->duplex = -1;
 
-               if (status & E1000_STATUS_FD)
-                       ecmd->duplex = DUPLEX_FULL;
-               else
-                       ecmd->duplex = DUPLEX_HALF;
+       if (netif_running(netdev)) {
+               if (netif_carrier_ok(netdev)) {
+                       ecmd->speed = adapter->link_speed;
+                       ecmd->duplex = adapter->link_duplex - 1;
+               }
        } else {
-               ecmd->speed = -1;
-               ecmd->duplex = -1;
+               u32 status = er32(STATUS);
+               if (status & E1000_STATUS_LU) {
+                       if (status & E1000_STATUS_SPEED_1000)
+                               ecmd->speed = 1000;
+                       else if (status & E1000_STATUS_SPEED_100)
+                               ecmd->speed = 100;
+                       else
+                               ecmd->speed = 10;
+
+                       if (status & E1000_STATUS_FD)
+                               ecmd->duplex = DUPLEX_FULL;
+                       else
+                               ecmd->duplex = DUPLEX_HALF;
+               }
        }
 
        ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
@@ -179,7 +185,7 @@ static int e1000_get_settings(struct net_device *netdev,
 
        /* MDI-X => 2; MDI =>1; Invalid =>0 */
        if ((hw->phy.media_type == e1000_media_type_copper) &&
-           !hw->mac.get_link_status)
+           netif_carrier_ok(netdev))
                ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
                                                      ETH_TP_MDI;
        else
@@ -191,19 +197,15 @@ static int e1000_get_settings(struct net_device *netdev,
 static u32 e1000_get_link(struct net_device *netdev)
 {
        struct e1000_adapter *adapter = netdev_priv(netdev);
-       struct e1000_mac_info *mac = &adapter->hw.mac;
+       struct e1000_hw *hw = &adapter->hw;
 
        /*
-        * If the link is not reported up to netdev, interrupts are disabled,
-        * and so the physical link state may have changed since we last
-        * looked. Set get_link_status to make sure that the true link
-        * state is interrogated, rather than pulling a cached and possibly
-        * stale link state from the driver.
+        * Avoid touching hardware registers when possible, otherwise
+        * link negotiation can get messed up when user-level scripts
+        * are rapidly polling the driver to see if link is up.
         */
-       if (!netif_carrier_ok(netdev))
-               mac->get_link_status = 1;
-
-       return e1000e_has_link(adapter);
+       return netif_running(netdev) ? netif_carrier_ok(netdev) :
+           !!(er32(STATUS) & E1000_STATUS_LU);
 }
 
 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
index 8faf2246d89c8e4193ae459dea77f21ba09824c0..2a71889112b651989417115433bea5cb594cde63 100644 (file)
@@ -3964,7 +3964,7 @@ static void e1000_print_link_info(struct e1000_adapter *adapter)
               ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
 }
 
-bool e1000e_has_link(struct e1000_adapter *adapter)
+static bool e1000e_has_link(struct e1000_adapter *adapter)
 {
        struct e1000_hw *hw = &adapter->hw;
        bool link_active = 0;