serqt: initial clean up pass for tty side
authorAlan Cox <alan@lxorguk.ukuu.org.uk>
Tue, 7 Apr 2009 15:48:27 +0000 (16:48 +0100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 7 Apr 2009 15:44:05 +0000 (08:44 -0700)
Avoid using port->tty where possible (makes refcount fixing easier
later).

Remove unused code (the ioctl path is not used if the device has
mget/mset functions)

Remove various un-needed typecasts and long names so it could read it to
do the changes.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/staging/serqt_usb/serqt_usb.c

index 1781510c53fd7a5a7dbc4e04c7b768801d3e06fd..234f332fc82fb813b21e92e7a851289d0ad7ea4f 100644 (file)
@@ -289,7 +289,8 @@ static void serial_unthrottle(struct tty_struct *tty);
 static int serial_break(struct tty_struct *tty, int break_state);
 static int serial_chars_in_buffer(struct tty_struct *tty);
 
-static int qt_open(struct usb_serial_port *port, struct file *filp);
+static int qt_open(struct tty_struct *tty, struct usb_serial_port *port,
+                               struct file *filp);
 static int BoxSetPrebufferLevel(struct usb_serial *serial);
 
 static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode);
@@ -300,24 +301,26 @@ static int BoxSetUart(struct usb_serial *serial, unsigned short Uart_Number,
 static int BoxOPenCloseChannel(struct usb_serial *serial, __u16 Uart_Number,
                               __u16 OpenClose,
                               struct qt_open_channel_data *pDeviceData);
-static void qt_close(struct usb_serial_port *port, struct file *filp);
+static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
+                                       struct file *filp);
 static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number,
                          unsigned short Register_Num, __u8 *pValue);
 static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number,
                          unsigned short Register_Num, unsigned short Value);
 static void qt_write_bulk_callback(struct urb *urb);
-static int qt_write(struct usb_serial_port *port, int from_user,
+static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
                    const unsigned char *buf, int count);
 static void port_softint(struct work_struct *work);
 static int qt_write_room(struct usb_serial_port *port);
 static int qt_chars_in_buffer(struct usb_serial_port *port);
-static int qt_ioctl(struct usb_serial_port *port, struct file *file,
-                   unsigned int cmd, unsigned long arg);
-static void qt_set_termios(struct usb_serial_port *port,
+static int qt_ioctl(struct tty_struct *tty, struct usb_serial_port *port,
+               struct file *file, unsigned int cmd, unsigned long arg);
+static void qt_set_termios(struct tty_struct *tty,
+                          struct usb_serial_port *port,
                           struct ktermios *old_termios);
-static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int UartNumber,
+static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index,
                             int bSet);
-static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 UartNumber);
+static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index);
 static int EmulateWriteQMCR_Reg(int index, unsigned uc_value);
 static int EmulateReadQMCR_Reg(int index, unsigned *uc_value);
 static struct usb_serial *find_the_box(unsigned int index);
@@ -336,10 +339,11 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
                           unsigned int set, unsigned int clear);
 static int serial_tiocmget(struct tty_struct *tty, struct file *file);
 
-static int qt_tiocmset(struct usb_serial_port *port, struct file *file,
-                      unsigned int value);
+static int qt_tiocmset(struct tty_struct *tty, struct usb_serial_port *port,
+                      struct file *file, unsigned int value);
 
-static int qt_tiocmget(struct usb_serial_port *port, struct file *file);
+static int qt_tiocmget(struct tty_struct *tty, struct usb_serial_port *port,
+                                                       struct file *file);
 
 /* Version Information */
 #define DRIVER_VERSION "v2.14"
@@ -818,7 +822,7 @@ static struct usb_serial *get_free_serial(int num_ports, int *minor)
        return NULL;
 }
 
-static int flip_that(struct tty_struct *tty, __u16 UartNumber,
+static int flip_that(struct tty_struct *tty, __u16 index,
                     struct usb_serial *serial)
 {
        tty_flip_buffer_push(tty);
@@ -829,18 +833,18 @@ static int flip_that(struct tty_struct *tty, __u16 UartNumber,
 /* Handles processing and moving data to the tty layer */
 static void port_sofrint(void *private)
 {
-       struct usb_serial_port *port = (struct usb_serial_port *)private;
+       struct usb_serial_port *port = private;
        struct usb_serial *serial = get_usb_serial(port, __func__);
        struct tty_struct *tty = port->tty;
        unsigned char *data = port->read_urb->transfer_buffer;
-       unsigned int UartNumber;
+       unsigned int index;
        struct urb *urb = port->read_urb;
        unsigned int RxCount = urb->actual_length;
        int i, result;
        int flag, flag_data;
 
-       /* UartNumber = MINOR(port->tty->device) - serial->minor; */
-       UartNumber = tty->index - serial->minor;
+       /* index = MINOR(port->tty->device) - serial->minor; */
+       index = tty->index - serial->minor;
 
        mydbg("%s - port %d\n", __func__, port->number);
        mydbg("%s - port->RxHolding = %d\n", __func__, port->RxHolding);
@@ -948,7 +952,7 @@ static void port_sofrint(void *private)
                      __func__, result);
        else {
                if (tty && RxCount)
-                       flip_that(tty, UartNumber, serial);
+                       flip_that(tty, index, serial);
        }
 
        return;
@@ -1097,7 +1101,7 @@ static int serial_open(struct tty_struct *tty, struct file *filp)
                port->RxHolding = 0;
                mydbg("%s port->RxHolding = 0\n", __func__);
 
-               retval = qt_open(port, filp);
+               retval = qt_open(tty, port, filp);
        }
 
        if (retval)
@@ -1112,11 +1116,12 @@ static int serial_open(struct tty_struct *tty, struct file *filp)
 /*****************************************************************************
  *device's specific driver functions
  *****************************************************************************/
-static int qt_open(struct usb_serial_port *port, struct file *filp)
+static int qt_open(struct tty_struct *tty, struct usb_serial_port *port,
+                                       struct file *filp)
 {
        struct usb_serial *serial = port->serial;
        int result = 0;
-       unsigned int UartNumber;
+       unsigned int index;
        struct qt_get_device_data DeviceData;
        struct qt_open_channel_data ChannelData;
        unsigned short default_divisor = 0x30;          /* gives 9600 baud rate */
@@ -1128,13 +1133,7 @@ static int qt_open(struct usb_serial_port *port, struct file *filp)
 
        mydbg("%s - port %d\n", __func__, port->number);
 
-       /* force low_latency on so that our tty_push actually forces the data through,
-          otherwise it is scheduled, and with high data rates (like with OHCI) data
-          can get lost. */
-       if (port->tty)
-               port->tty->low_latency = 0;
-
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
 
        status = box_get_device(serial, &DeviceData);
        if (status < 0) {
@@ -1147,7 +1146,7 @@ static int qt_open(struct usb_serial_port *port, struct file *filp)
        /* Open uart channel */
 
        /* Port specific setups */
-       status = BoxOPenCloseChannel(serial, UartNumber, 1, &ChannelData);
+       status = BoxOPenCloseChannel(serial, index, 1, &ChannelData);
        if (status < 0) {
                mydbg(__FILE__ "BoxOPenCloseChannel failed\n");
                return status;
@@ -1161,7 +1160,7 @@ static int qt_open(struct usb_serial_port *port, struct file *filp)
            (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD);
 
        /* Set Baud rate to default and turn off (default)flow control here */
-       status = BoxSetUart(serial, UartNumber, default_divisor, default_LCR);
+       status = BoxSetUart(serial, index, default_divisor, default_LCR);
        if (status < 0) {
                mydbg(__FILE__ "BoxSetUart failed\n");
                return status;
@@ -1169,7 +1168,7 @@ static int qt_open(struct usb_serial_port *port, struct file *filp)
        mydbg(__FILE__ "BoxSetUart completed.\n");
 
        /* Put this here to make it responsive to stty and defauls set by the tty layer */
-       qt_set_termios(port, NULL);
+       qt_set_termios(tty, port, NULL);
 
        /* Initialize the wait que head */
        init_waitqueue_head(&(port->wait));
@@ -1203,7 +1202,7 @@ static int qt_open(struct usb_serial_port *port, struct file *filp)
 static void serial_close(struct tty_struct *tty, struct file *filp)
 {
        struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+           tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
 
        if (!serial)
@@ -1226,7 +1225,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
                        mydbg("%s - port->closePending = 1\n", __func__);
 
                        if (serial->dev) {
-                               qt_close(port, filp);
+                               qt_close(tty, port, filp);
                                port->open_count = 0;
                        }
                }
@@ -1240,20 +1239,21 @@ exit:
 
 }
 
-static void qt_close(struct usb_serial_port *port, struct file *filp)
+static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
+                                                       struct file *filp)
 {
        unsigned long jift = jiffies + 10 * HZ;
-       __u8 LSR_Value, MCR_Value;
+       u8 lsr, mcr;
        struct usb_serial *serial = port->serial;
        int status;
-       unsigned int UartNumber;
+       unsigned int index;
 
        struct qt_open_channel_data ChannelData;
        status = 0;
-       LSR_Value = 0;
+       lsr = 0;
 
        mydbg("%s - port %d\n", __func__, port->number);
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
 
        /* shutdown any bulk reads that might be going on */
        if (serial->num_bulk_out)
@@ -1263,20 +1263,19 @@ static void qt_close(struct usb_serial_port *port, struct file *filp)
 
        /* wait up to 30 seconds for transmitter to empty */
        do {
-               status = BoxGetRegister(serial, UartNumber, LINE_STATUS_REGISTER, &LSR_Value);
+               status = BoxGetRegister(serial, index, LINE_STATUS_REGISTER, &lsr);
                if (status < 0) {
                        mydbg(__FILE__ "box_get_device failed\n");
                        break;
                }
 
-               if ((LSR_Value & SERIAL_LSR_TEMT)
+               if ((lsr & SERIAL_LSR_TEMT)
                    && (port->ReadBulkStopped == 1))
                        break;
                schedule();
 
        }
-       while (jiffies <= jift)
-               ;
+       while (jiffies <= jift);
 
        if (jiffies > jift)
                mydbg("%s - port %d timout of checking transmitter empty\n",
@@ -1286,17 +1285,17 @@ static void qt_close(struct usb_serial_port *port, struct file *filp)
                      __func__, port->number);
 
        status =
-           BoxGetRegister(serial, UartNumber, MODEM_CONTROL_REGISTER,
-                          &MCR_Value);
-       mydbg(__FILE__ "BoxGetRegister MCR = 0x%x.\n", MCR_Value);
+           BoxGetRegister(serial, index, MODEM_CONTROL_REGISTER,
+                          &mcr);
+       mydbg(__FILE__ "BoxGetRegister MCR = 0x%x.\n", mcr);
 
        if (status >= 0) {
-               MCR_Value &= ~(SERIAL_MCR_DTR | SERIAL_MCR_RTS);
-               /* status = BoxSetRegister(serial, UartNumber, MODEM_CONTROL_REGISTER, MCR_Value); */
+               mcr &= ~(SERIAL_MCR_DTR | SERIAL_MCR_RTS);
+               /* status = BoxSetRegister(serial, index, MODEM_CONTROL_REGISTER, mcr); */
        }
 
        /* Close uart channel */
-       status = BoxOPenCloseChannel(serial, UartNumber, 0, &ChannelData);
+       status = BoxOPenCloseChannel(serial, index, 0, &ChannelData);
        if (status < 0)
                mydbg("%s - port %d BoxOPenCloseChannel failed.\n",
                      __func__, port->number);
@@ -1308,12 +1307,10 @@ static void qt_close(struct usb_serial_port *port, struct file *filp)
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
                        int count)
 {
-       struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+       struct usb_serial_port *port = tty->driver_data;
        struct usb_serial *serial;
        int retval = -EINVAL;
-       unsigned int UartNumber;
-       int from_user = 0;
+       unsigned int index;
 
        serial = get_usb_serial(port, __func__);
        if (serial == NULL)
@@ -1321,7 +1318,7 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf,
        /* This can happen if we get disconnected a */
        if (port->open_count == 0)
                return -ENODEV;
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
 
        mydbg("%s - port %d, %d byte(s)\n", __func__, port->number, count);
        mydbg("%s - port->RxHolding =  %d\n", __func__, port->RxHolding);
@@ -1331,19 +1328,19 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf,
                goto exit;
        }
 
-       retval = qt_write(port, from_user, buf, count);
+       retval = qt_write(tty, port, buf, count);
 
 exit:
        return retval;
 }
 
-static int qt_write(struct usb_serial_port *port, int from_user,
-                   const unsigned char *buf, int count)
+static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
+                               const unsigned char *buf, int count)
 {
        int result;
-       unsigned int UartNumber;
-
+       unsigned int index;
        struct usb_serial *serial = get_usb_serial(port, __func__);
+
        if (serial == NULL)
                return -ENODEV;
 
@@ -1354,7 +1351,7 @@ static int qt_write(struct usb_serial_port *port, int from_user,
                return 0;
        }
 
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
        /* only do something if we have a bulk out endpoint */
        if (serial->num_bulk_out) {
                if (port->write_urb->status == -EINPROGRESS) {
@@ -1364,14 +1361,7 @@ static int qt_write(struct usb_serial_port *port, int from_user,
 
                count =
                    (count > port->bulk_out_size) ? port->bulk_out_size : count;
-
-               if (from_user) {
-                       if (copy_from_user
-                           (port->write_urb->transfer_buffer, buf, count))
-                               return -EFAULT;
-               } else {
-                       memcpy(port->write_urb->transfer_buffer, buf, count);
-               }
+               memcpy(port->write_urb->transfer_buffer, buf, count);
 
                /* usb_serial_debug_data(__FILE__, __func__, count, port->write_urb->transfer_buffer); */
 
@@ -1449,8 +1439,7 @@ static void port_softint(struct work_struct *work)
 }
 static int serial_write_room(struct tty_struct *tty)
 {
-       struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+       struct usb_serial_port *port = tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
        int retval = -EINVAL;
 
@@ -1493,8 +1482,7 @@ static int qt_write_room(struct usb_serial_port *port)
 }
 static int serial_chars_in_buffer(struct tty_struct *tty)
 {
-       struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+       struct usb_serial_port *port = tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
        int retval = -EINVAL;
 
@@ -1537,17 +1525,16 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
                           unsigned int set, unsigned int clear)
 {
 
-       struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+       struct usb_serial_port *port = tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
        int retval = -ENODEV;
-       unsigned int UartNumber;
+       unsigned int index;
        mydbg("In %s \n", __func__);
 
        if (!serial)
                return -ENODEV;
 
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
 
        down(&port->sem);
 
@@ -1559,22 +1546,22 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
                goto exit;
        }
 
-       retval = qt_tiocmset(port, file, set);
+       retval = qt_tiocmset(tty, port, file, set);
 
 exit:
        up(&port->sem);
        return retval;
 }
 
-static int qt_tiocmset(struct usb_serial_port *port, struct file *file,
-                      unsigned int value)
+static int qt_tiocmset(struct tty_struct *tty, struct usb_serial_port *port,
+                      struct file *file, unsigned int value)
 {
 
-       __u8 MCR_Value;
+       u8 mcr;
        int status;
-       unsigned int UartNumber;
-
+       unsigned int index;
        struct usb_serial *serial = get_usb_serial(port, __func__);
+
        if (serial == NULL)
                return -ENODEV;
 
@@ -1583,10 +1570,10 @@ static int qt_tiocmset(struct usb_serial_port *port, struct file *file,
     /**************************************************************************************/
     /**  TIOCMGET
      */
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
        status =
-           BoxGetRegister(port->serial, UartNumber, MODEM_CONTROL_REGISTER,
-                          &MCR_Value);
+           BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
+                          &mcr);
        if (status < 0)
                return -ESPIPE;
 
@@ -1594,17 +1581,17 @@ static int qt_tiocmset(struct usb_serial_port *port, struct file *file,
         * Turn off the RTS and DTR and loopbcck and then only turn on what was
         * asked for
         */
-       MCR_Value &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
+       mcr &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP);
        if (value & TIOCM_RTS)
-               MCR_Value |= SERIAL_MCR_RTS;
+               mcr |= SERIAL_MCR_RTS;
        if (value & TIOCM_DTR)
-               MCR_Value |= SERIAL_MCR_DTR;
+               mcr |= SERIAL_MCR_DTR;
        if (value & TIOCM_LOOP)
-               MCR_Value |= SERIAL_MCR_LOOP;
+               mcr |= SERIAL_MCR_LOOP;
 
        status =
-           BoxSetRegister(port->serial, UartNumber, MODEM_CONTROL_REGISTER,
-                          MCR_Value);
+           BoxSetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
+                          mcr);
        if (status < 0)
                return -ESPIPE;
        else
@@ -1614,18 +1601,16 @@ static int qt_tiocmset(struct usb_serial_port *port, struct file *file,
 static int serial_tiocmget(struct tty_struct *tty, struct file *file)
 {
 
-       struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
-
+       struct usb_serial_port *port = tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
        int retval = -ENODEV;
-       unsigned int UartNumber;
+       unsigned int index;
        mydbg("In %s \n", __func__);
 
        if (!serial)
                return -ENODEV;
 
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
 
        down(&port->sem);
 
@@ -1637,56 +1622,55 @@ static int serial_tiocmget(struct tty_struct *tty, struct file *file)
                goto exit;
        }
 
-       retval = qt_tiocmget(port, file);
+       retval = qt_tiocmget(tty, port, file);
 
 exit:
        up(&port->sem);
        return retval;
 }
 
-static int qt_tiocmget(struct usb_serial_port *port, struct file *file)
+static int qt_tiocmget(struct tty_struct *tty,
+                       struct usb_serial_port *port, struct file *file)
 {
 
-       __u8 MCR_Value;
-       __u8 MSR_Value;
+       u8 mcr;
+       u8 msr;
        unsigned int result = 0;
        int status;
-       unsigned int UartNumber;
-       struct tty_struct *tty;
+       unsigned int index;
 
        struct usb_serial *serial = get_usb_serial(port, __func__);
        if (serial == NULL)
                return -ENODEV;
-       tty = port->tty;
 
        mydbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
 
     /**************************************************************************************/
     /**  TIOCMGET
      */
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
        status =
-           BoxGetRegister(port->serial, UartNumber, MODEM_CONTROL_REGISTER,
-                          &MCR_Value);
+           BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER,
+                          &mcr);
        if (status >= 0) {
                status =
-                   BoxGetRegister(port->serial, UartNumber,
-                                  MODEM_STATUS_REGISTER, &MSR_Value);
+                   BoxGetRegister(port->serial, index,
+                                  MODEM_STATUS_REGISTER, &msr);
 
        }
 
        if (status >= 0) {
-               result = ((MCR_Value & SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
+               result = ((mcr & SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
                    /* DTR IS SET */
-                   | ((MCR_Value & SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
+                   | ((mcr & SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
                    /* RTS IS SET */
-                   | ((MSR_Value & SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
+                   | ((msr & SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
                    /* CTS is set */
-                   | ((MSR_Value & SERIAL_MSR_CD) ? TIOCM_CAR : 0)
+                   | ((msr & SERIAL_MSR_CD) ? TIOCM_CAR : 0)
                    /* Carrier detect is set */
-                   | ((MSR_Value & SERIAL_MSR_RI) ? TIOCM_RI : 0)
+                   | ((msr & SERIAL_MSR_RI) ? TIOCM_RI : 0)
                    /* Ring indicator set */
-                   | ((MSR_Value & SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
+                   | ((msr & SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
                /* DSR is set */
                return result;
 
@@ -1698,17 +1682,16 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file,
                        unsigned int cmd, unsigned long arg)
 {
 
-       struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+       struct usb_serial_port *port = tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
        int retval = -ENODEV;
-       unsigned int UartNumber;
+       unsigned int index;
        mydbg("In %s \n", __func__);
 
        if (!serial)
                return -ENODEV;
 
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
 
        down(&port->sem);
 
@@ -1720,125 +1703,34 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file,
                goto exit;
        }
 
-       retval = qt_ioctl(port, file, cmd, arg);
+       retval = qt_ioctl(tty, port, file, cmd, arg);
 
 exit:
        up(&port->sem);
        return retval;
 }
-static int qt_ioctl(struct usb_serial_port *port, struct file *file,
-                   unsigned int cmd, unsigned long arg)
+static int qt_ioctl(struct tty_struct *tty, struct usb_serial_port *port,
+                       struct file *file, unsigned int cmd, unsigned long arg)
 {
-       __u8 MCR_Value;
-       __u8 MSR_Value;
-       unsigned short Prev_MSR_Value;
+       __u8 mcr;
+       __u8 msr;
+       unsigned short prev_msr;
        unsigned int value, result = 0;
        int status;
-       unsigned int UartNumber;
-       struct tty_struct *tty;
+       unsigned int index;
 
        struct usb_serial *serial = get_usb_serial(port, __func__);
        if (serial == NULL)
                return -ENODEV;
-       tty = port->tty;
 
        mydbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty);
 
        /* TIOCMGET */
-       UartNumber = port->tty->index - serial->minor;
-
-       if (cmd == TIOCMGET) {
-               MCR_Value = port->shadowMCR;
-               MSR_Value = port->shadowMSR;
-
-               {
-                       result = ((MCR_Value & SERIAL_MCR_DTR) ? TIOCM_DTR : 0)
-                           /* DTR IS SET */
-                           | ((MCR_Value & SERIAL_MCR_RTS) ? TIOCM_RTS : 0)
-                           /* RTS IS SET */
-                           | ((MSR_Value & SERIAL_MSR_CTS) ? TIOCM_CTS : 0)
-                           /* CTS is set */
-                           | ((MSR_Value & SERIAL_MSR_CD) ? TIOCM_CAR : 0)
-                           /* Carrier detect is set */
-                           | ((MSR_Value & SERIAL_MSR_RI) ? TIOCM_RI : 0)
-                           /* Ring indicator set */
-                           | ((MSR_Value & SERIAL_MSR_DSR) ? TIOCM_DSR : 0);
-                       /* DSR is set */
-                       if (copy_to_user
-                           ((unsigned int *)arg, &result,
-                            sizeof(unsigned int)))
-                               return -EFAULT;
-                       return 0;
-
-               }
-       }
-
-       /* TIOCMBIS, TIOCMBIC, AND TIOCMSET */
-       if (cmd == TIOCMBIS || cmd == TIOCMBIC || cmd == TIOCMSET) {
-               status =
-                   BoxGetRegister(port->serial, UartNumber,
-                                  MODEM_CONTROL_REGISTER, &MCR_Value);
-               if (status < 0)
-                       return -ESPIPE;
-               if (copy_from_user
-                   (&value, (unsigned int *)arg, sizeof(unsigned int)))
-                       return -EFAULT;
-
-               switch (cmd) {
-               case TIOCMBIS:
-                       if (value & TIOCM_RTS)
-                               MCR_Value |= SERIAL_MCR_RTS;
-                       if (value & TIOCM_DTR)
-                               MCR_Value |= SERIAL_MCR_DTR;
-                       if (value & TIOCM_LOOP)
-                               MCR_Value |= SERIAL_MCR_LOOP;
-                       break;
-               case TIOCMBIC:
-                       if (value & TIOCM_RTS)
-                               MCR_Value &= ~SERIAL_MCR_RTS;
-                       if (value & TIOCM_DTR)
-                               MCR_Value &= ~SERIAL_MCR_DTR;
-                       if (value & TIOCM_LOOP)
-                               MCR_Value &= ~SERIAL_MCR_LOOP;
-                       break;
-               case TIOCMSET:
-                       /*
-                        * Turn off the RTS and DTR and loopbcck and then only
-                        * turn on what was asked for
-                        */
-                       MCR_Value &=
-                           ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR |
-                             SERIAL_MCR_LOOP);
-                       if (value & TIOCM_RTS)
-                               MCR_Value |= SERIAL_MCR_RTS;
-                       if (value & TIOCM_DTR)
-                               MCR_Value |= SERIAL_MCR_DTR;
-                       if (value & TIOCM_LOOP)
-                               MCR_Value |= SERIAL_MCR_LOOP;
-                       break;
-               default:
-                       break;
-
-               }
-               status =
-                   BoxSetRegister(port->serial, UartNumber,
-                                  MODEM_CONTROL_REGISTER, MCR_Value);
-               if (status < 0)
-                       return -ESPIPE;
-               else {
-                       port->shadowMCR = MCR_Value;
-                       return 0;
-               }
-
-       }
-    /**************************************************************************************/
-   /**   TIOCMBIS, TIOCMBIC, AND TIOCMSET    end
-   */
-    /**************************************************************************************/
+       index = tty->index - serial->minor;
 
        if (cmd == TIOCMIWAIT) {
                DECLARE_WAITQUEUE(wait, current);
-               Prev_MSR_Value = port->shadowMSR & SERIAL_MSR_MASK;
+               prev_msr = port->shadowMSR & SERIAL_MSR_MASK;
                while (1) {
                        add_wait_queue(&port->wait, &wait);
                        set_current_state(TASK_INTERRUPTIBLE);
@@ -1847,22 +1739,22 @@ static int qt_ioctl(struct usb_serial_port *port, struct file *file,
                        /* see if a signal woke us up */
                        if (signal_pending(current))
                                return -ERESTARTSYS;
-                       MSR_Value = port->shadowMSR & SERIAL_MSR_MASK;
-                       if (MSR_Value == Prev_MSR_Value)
+                       msr = port->shadowMSR & SERIAL_MSR_MASK;
+                       if (msr == prev_msr)
                                return -EIO;    /* no change error */
 
                        if ((arg & TIOCM_RNG
-                            && ((Prev_MSR_Value & SERIAL_MSR_RI) ==
-                                (MSR_Value & SERIAL_MSR_RI)))
+                            && ((prev_msr & SERIAL_MSR_RI) ==
+                                (msr & SERIAL_MSR_RI)))
                            || (arg & TIOCM_DSR
-                               && ((Prev_MSR_Value & SERIAL_MSR_DSR) ==
-                                   (MSR_Value & SERIAL_MSR_DSR)))
+                               && ((prev_msr & SERIAL_MSR_DSR) ==
+                                   (msr & SERIAL_MSR_DSR)))
                            || (arg & TIOCM_CD
-                               && ((Prev_MSR_Value & SERIAL_MSR_CD) ==
-                                   (MSR_Value & SERIAL_MSR_CD)))
+                               && ((prev_msr & SERIAL_MSR_CD) ==
+                                   (msr & SERIAL_MSR_CD)))
                            || (arg & TIOCM_CTS
-                               && ((Prev_MSR_Value & SERIAL_MSR_CTS) ==
-                                   (MSR_Value & SERIAL_MSR_CTS)))) {
+                               && ((prev_msr & SERIAL_MSR_CTS) ==
+                                   (msr & SERIAL_MSR_CTS)))) {
                                return 0;
                        }
 
@@ -1878,7 +1770,7 @@ static int qt_ioctl(struct usb_serial_port *port, struct file *file,
 static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 {
        struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+           tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
 
        if (!serial)
@@ -1894,22 +1786,22 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
        }
 
        /* pass on to the driver specific version of this function if it is available */
-       qt_set_termios(port, old);
+       qt_set_termios(tty, port, old);
 
 exit:
        up(&port->sem);
 }
 
-static void qt_set_termios(struct usb_serial_port *port,
+static void qt_set_termios(struct tty_struct *tty,
+                          struct usb_serial_port *port,
                           struct ktermios *old_termios)
 {
        unsigned int cflag;
        int baud, divisor, remainder;
-       unsigned char LCR_change_to = 0;
-       struct tty_struct *tty;
+       unsigned char new_LCR = 0;
        int status;
        struct usb_serial *serial;
-       __u16 UartNumber;
+       __u16 index;
        __u16 tmp, tmp2;
 
        mydbg("%s - port %d\n", __func__, port->number);
@@ -1921,59 +1813,46 @@ static void qt_set_termios(struct usb_serial_port *port,
        tmp2 = serial->minor;
        mydbg("%s - serial->minor =  %d\n", __func__, tmp2);
 
-       UartNumber = port->tty->index - serial->minor;
-
-       tty = port->tty;
+       index = port->tty->index - serial->minor;
 
        cflag = tty->termios->c_cflag;
 
-       if (old_termios) {
-               if ((cflag == old_termios->c_cflag)
-                   && (RELEVANT_IFLAG(tty->termios->c_iflag) ==
-                       RELEVANT_IFLAG(old_termios->c_iflag))) {
-                       mydbg("%s - Nothing to change\n", __func__);
-                       return;
-               }
-
-       }
-
        mydbg("%s - 3\n", __func__);
 
        switch (cflag) {
        case CS5:
-               LCR_change_to |= SERIAL_5_DATA;
+               new_LCR |= SERIAL_5_DATA;
                break;
        case CS6:
-               LCR_change_to |= SERIAL_6_DATA;
+               new_LCR |= SERIAL_6_DATA;
                break;
        case CS7:
-               LCR_change_to |= SERIAL_7_DATA;
+               new_LCR |= SERIAL_7_DATA;
                break;
        default:
        case CS8:
-               LCR_change_to |= SERIAL_8_DATA;
+               new_LCR |= SERIAL_8_DATA;
                break;
        }
 
        /* Parity stuff */
        if (cflag & PARENB) {
                if (cflag & PARODD)
-                       LCR_change_to |= SERIAL_ODD_PARITY;
+                       new_LCR |= SERIAL_ODD_PARITY;
                else
-                       LCR_change_to |= SERIAL_EVEN_PARITY;
+                       new_LCR |= SERIAL_EVEN_PARITY;
        }
        if (cflag & CSTOPB)
-               LCR_change_to |= SERIAL_TWO_STOPB;
+               new_LCR |= SERIAL_TWO_STOPB;
        else
-               LCR_change_to |= SERIAL_TWO_STOPB;
+               new_LCR |= SERIAL_TWO_STOPB;
 
        mydbg("%s - 4\n", __func__);
        /* Thats the LCR stuff, go ahead and set it */
        baud = tty_get_baud_rate(tty);
-       if (!baud) {
+       if (!baud)
                /* pick a default, any default... */
                baud = 9600;
-       }
 
        mydbg("%s - got baud = %d\n", __func__, baud);
 
@@ -1986,9 +1865,7 @@ static void qt_set_termios(struct usb_serial_port *port,
        /*
         * Set Baud rate to default and turn off (default)flow control here
         */
-       status =
-           BoxSetUart(serial, UartNumber, (unsigned short)divisor,
-                      LCR_change_to);
+       status = BoxSetUart(serial, index, (unsigned short)divisor, new_LCR);
        if (status < 0) {
                mydbg(__FILE__ "BoxSetUart failed\n");
                return;
@@ -2000,7 +1877,7 @@ static void qt_set_termios(struct usb_serial_port *port,
                      port->number);
 
                /* Enable RTS/CTS flow control */
-               status = BoxSetHW_FlowCtrl(serial, UartNumber, 1);
+               status = BoxSetHW_FlowCtrl(serial, index, 1);
 
                if (status < 0) {
                        mydbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
@@ -2011,7 +1888,7 @@ static void qt_set_termios(struct usb_serial_port *port,
                mydbg("%s - disabling HW flow control port %d\n", __func__,
                      port->number);
 
-               status = BoxSetHW_FlowCtrl(serial, UartNumber, 0);
+               status = BoxSetHW_FlowCtrl(serial, index, 0);
                if (status < 0) {
                        mydbg(__FILE__ "BoxSetHW_FlowCtrl failed\n");
                        return;
@@ -2025,19 +1902,20 @@ static void qt_set_termios(struct usb_serial_port *port,
                unsigned char stop_char = STOP_CHAR(tty);
                unsigned char start_char = START_CHAR(tty);
                status =
-                   BoxSetSW_FlowCtrl(serial, UartNumber, stop_char,
+                   BoxSetSW_FlowCtrl(serial, index, stop_char,
                                      start_char);
                if (status < 0)
                        mydbg(__FILE__ "BoxSetSW_FlowCtrl (enabled) failed\n");
 
        } else {
                /* disable SW flow control */
-               status = BoxDisable_SW_FlowCtrl(serial, UartNumber);
+               status = BoxDisable_SW_FlowCtrl(serial, index);
                if (status < 0)
                        mydbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n");
 
        }
-
+       tty->termios->c_cflag &= ~CMSPAR;
+       /* FIXME: Error cases should be returning the actual bits changed only */
 }
 
 /****************************************************************************
@@ -2237,11 +2115,11 @@ static int BoxSetUart(struct usb_serial *serial, unsigned short Uart_Number,
        return result;
 }
 
-static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int UartNumber,
+static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index,
                             int bSet)
 {
-       __u8 MCR_Value = 0;
-       __u8 MSR_Value = 0, MOUT_Value = 0;
+       __u8 mcr = 0;
+       __u8 msr = 0, MOUT_Value = 0;
        struct usb_serial_port *port;
        unsigned int status;
 
@@ -2249,34 +2127,34 @@ static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int UartNumber,
 
        if (bSet == 1) {
                /* flow control, box will clear RTS line to prevent remote */
-               MCR_Value = SERIAL_MCR_RTS;
+               mcr = SERIAL_MCR_RTS;
        }                       /* device from xmitting more chars */
        else {
                /* no flow control to remote device */
-               MCR_Value = 0;
+               mcr = 0;
 
        }
-       MOUT_Value = MCR_Value << 8;
+       MOUT_Value = mcr << 8;
 
        if (bSet == 1) {
                /* flow control, box will inhibit xmit data if CTS line is
                 * asserted */
-               MSR_Value = SERIAL_MSR_CTS;
+               msr = SERIAL_MSR_CTS;
        } else {
                /* Box will not inhimbe xmit data due to CTS line */
-               MSR_Value = 0;
+               msr = 0;
        }
-       MOUT_Value |= MSR_Value;
+       MOUT_Value |= msr;
 
        status =
            usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
                            QT_HW_FLOW_CONTROL_MASK, 0x40, MOUT_Value,
-                           UartNumber, NULL, 0, 300);
+                           index, NULL, 0, 300);
        return status;
 
 }
 
-static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 UartNumber,
+static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 index,
                             unsigned char stop_char, unsigned char start_char)
 {
        __u16 nSWflowout;
@@ -2288,17 +2166,17 @@ static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 UartNumber,
        result =
            usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
                            QT_SW_FLOW_CONTROL_MASK, 0x40, nSWflowout,
-                           UartNumber, NULL, 0, 300);
+                           index, NULL, 0, 300);
        return result;
 
 }
-static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 UartNumber)
+static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index)
 {
        int result;
 
        result =
            usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-                           QT_SW_FLOW_CONTROL_DISABLE, 0x40, 0, UartNumber,
+                           QT_SW_FLOW_CONTROL_DISABLE, 0x40, 0, index,
                            NULL, 0, 300);
        return result;
 
@@ -2307,7 +2185,7 @@ static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 UartNumber)
 static void serial_throttle(struct tty_struct *tty)
 {
        struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+           tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
        mydbg("%s - port %d\n", __func__, port->number);
 
@@ -2334,7 +2212,7 @@ exit:
 static void serial_unthrottle(struct tty_struct *tty)
 {
        struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+           tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
        unsigned int result;
 
@@ -2380,20 +2258,19 @@ exit:
 
 static int serial_break(struct tty_struct *tty, int break_state)
 {
-       struct usb_serial_port *port =
-           (struct usb_serial_port *)tty->driver_data;
+       struct usb_serial_port *port = tty->driver_data;
        struct usb_serial *serial = get_usb_serial(port, __func__);
-       __u16 UartNumber, Break_Value;
+       u16 index, onoff;
        unsigned int result;
 
-       UartNumber = port->tty->index - serial->minor;
+       index = tty->index - serial->minor;
        if (!serial)
                return -ENODEV;
 
        if (break_state == -1)
-               Break_Value = 1;
+               onoff = 1;
        else
-               Break_Value = 0;
+               onoff = 0;
 
        down(&port->sem);
 
@@ -2406,7 +2283,7 @@ static int serial_break(struct tty_struct *tty, int break_state)
 
        result =
            usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-                           QT_BREAK_CONTROL, 0x40, Break_Value, UartNumber,
+                           QT_BREAK_CONTROL, 0x40, onoff, index,
                            NULL, 0, 300);
 
 exit: