*/
#define devpriv ((struct cb_pcidas_private *)dev->private)
-static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
- uint8_t value);
static int trimpot_7376_write(struct comedi_device *dev, uint8_t value);
static int trimpot_8402_write(struct comedi_device *dev, unsigned int channel,
uint8_t value);
return 1;
}
+static void write_calibration_bitstream(struct comedi_device *dev,
+ unsigned int register_bits,
+ unsigned int bitstream,
+ unsigned int bitstream_length)
+{
+ static const int write_delay = 1;
+ unsigned int bit;
+
+ for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
+ if (bitstream & bit)
+ register_bits |= SERIAL_DATA_IN_BIT;
+ else
+ register_bits &= ~SERIAL_DATA_IN_BIT;
+ udelay(write_delay);
+ outw(register_bits, devpriv->control_status + CALIBRATION_REG);
+ }
+}
+
+static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
+ uint8_t value)
+{
+ static const int num_caldac_channels = 8;
+ static const int bitstream_length = 11;
+ unsigned int bitstream = ((address & 0x7) << 8) | value;
+ static const int caldac_8800_udelay = 1;
+
+ if (address >= num_caldac_channels) {
+ comedi_error(dev, "illegal caldac channel");
+ return -1;
+ }
+
+ if (value == devpriv->caldac_value[address])
+ return 1;
+
+ devpriv->caldac_value[address] = value;
+
+ write_calibration_bitstream(dev, cal_enable_bits(dev), bitstream,
+ bitstream_length);
+
+ udelay(caldac_8800_udelay);
+ outw(cal_enable_bits(dev) | SELECT_8800_BIT,
+ devpriv->control_status + CALIBRATION_REG);
+ udelay(caldac_8800_udelay);
+ outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG);
+
+ return 1;
+}
+
static int caldac_write_insn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn, unsigned int *data)
return IRQ_HANDLED;
}
-static void write_calibration_bitstream(struct comedi_device *dev,
- unsigned int register_bits,
- unsigned int bitstream,
- unsigned int bitstream_length)
-{
- static const int write_delay = 1;
- unsigned int bit;
-
- for (bit = 1 << (bitstream_length - 1); bit; bit >>= 1) {
- if (bitstream & bit)
- register_bits |= SERIAL_DATA_IN_BIT;
- else
- register_bits &= ~SERIAL_DATA_IN_BIT;
- udelay(write_delay);
- outw(register_bits, devpriv->control_status + CALIBRATION_REG);
- }
-}
-
-static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
- uint8_t value)
-{
- static const int num_caldac_channels = 8;
- static const int bitstream_length = 11;
- unsigned int bitstream = ((address & 0x7) << 8) | value;
- static const int caldac_8800_udelay = 1;
-
- if (address >= num_caldac_channels) {
- comedi_error(dev, "illegal caldac channel");
- return -1;
- }
-
- if (value == devpriv->caldac_value[address])
- return 1;
-
- devpriv->caldac_value[address] = value;
-
- write_calibration_bitstream(dev, cal_enable_bits(dev), bitstream,
- bitstream_length);
-
- udelay(caldac_8800_udelay);
- outw(cal_enable_bits(dev) | SELECT_8800_BIT,
- devpriv->control_status + CALIBRATION_REG);
- udelay(caldac_8800_udelay);
- outw(cal_enable_bits(dev), devpriv->control_status + CALIBRATION_REG);
-
- return 1;
-}
-
static int trimpot_7376_write(struct comedi_device *dev, uint8_t value)
{
static const int bitstream_length = 7;