net: thunderx: Support for different LMAC types within BGX
authorSunil Goutham <sgoutham@cavium.com>
Fri, 12 Aug 2016 11:21:30 +0000 (16:51 +0530)
committerDavid S. Miller <davem@davemloft.net>
Sat, 13 Aug 2016 18:59:30 +0000 (11:59 -0700)
On 88xx all LMACs in a BGX will be in same mode but on 81xx
BGX can be split as two and there can be LMACs configured in
different modes.

These changes move lmac_type, lane2serdes fields into per lmac
struct from BGX struct. Got rid of qlm_mode field which has become
redundant with these changes. And now no of valid LMACs is read
from CSRs configured by low level firmware and figuring out the
same based on QLM mode is discarded

Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/cavium/thunder/thunder_bgx.c
drivers/net/ethernet/cavium/thunder/thunder_bgx.h

index 63a39ac97d53beb65e562bba0a9fb1b86f7baac7..44974270093d34f7fae1f80be8320d0977f89f6d 100644 (file)
@@ -28,6 +28,9 @@ struct lmac {
        struct bgx              *bgx;
        int                     dmac;
        u8                      mac[ETH_ALEN];
+       u8                      lmac_type;
+       u8                      lane_to_sds;
+       bool                    use_training;
        bool                    link_up;
        int                     lmacid; /* ID within BGX */
        int                     lmacid_bd; /* ID on board */
@@ -43,12 +46,8 @@ struct lmac {
 
 struct bgx {
        u8                      bgx_id;
-       u8                      qlm_mode;
        struct  lmac            lmac[MAX_LMAC_PER_BGX];
        int                     lmac_count;
-       int                     lmac_type;
-       int                     lane_to_sds;
-       int                     use_training;
        void __iomem            *reg_base;
        struct pci_dev          *pdev;
 };
@@ -418,9 +417,10 @@ static int bgx_lmac_sgmii_init(struct bgx *bgx, int lmacid)
        return 0;
 }
 
-static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type)
+static int bgx_lmac_xaui_init(struct bgx *bgx, struct lmac *lmac)
 {
        u64 cfg;
+       int lmacid = lmac->lmacid;
 
        /* Reset SPU */
        bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET);
@@ -436,7 +436,7 @@ static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type)
 
        bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER);
        /* Set interleaved running disparity for RXAUI */
-       if (bgx->lmac_type != BGX_MODE_RXAUI)
+       if (lmac->lmac_type != BGX_MODE_RXAUI)
                bgx_reg_modify(bgx, lmacid,
                               BGX_SPUX_MISC_CONTROL, SPU_MISC_CTL_RX_DIS);
        else
@@ -451,7 +451,7 @@ static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type)
        cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
        bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg);
 
-       if (bgx->use_training) {
+       if (lmac->use_training) {
                bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LP_CUP, 0x00);
                bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_CUP, 0x00);
                bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_REP, 0x00);
@@ -474,9 +474,9 @@ static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type)
        bgx_reg_write(bgx, lmacid, BGX_SPUX_AN_CONTROL, cfg);
 
        cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_AN_ADV);
-       if (bgx->lmac_type == BGX_MODE_10G_KR)
+       if (lmac->lmac_type == BGX_MODE_10G_KR)
                cfg |= (1 << 23);
-       else if (bgx->lmac_type == BGX_MODE_40G_KR)
+       else if (lmac->lmac_type == BGX_MODE_40G_KR)
                cfg |= (1 << 24);
        else
                cfg &= ~((1 << 23) | (1 << 24));
@@ -511,11 +511,11 @@ static int bgx_xaui_check_link(struct lmac *lmac)
 {
        struct bgx *bgx = lmac->bgx;
        int lmacid = lmac->lmacid;
-       int lmac_type = bgx->lmac_type;
+       int lmac_type = lmac->lmac_type;
        u64 cfg;
 
        bgx_reg_modify(bgx, lmacid, BGX_SPUX_MISC_CONTROL, SPU_MISC_CTL_RX_DIS);
-       if (bgx->use_training) {
+       if (lmac->use_training) {
                cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
                if (!(cfg & (1ull << 13))) {
                        cfg = (1ull << 13) | (1ull << 14);
@@ -556,7 +556,7 @@ static int bgx_xaui_check_link(struct lmac *lmac)
                               BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT);
        if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) {
                dev_err(&bgx->pdev->dev, "Receive fault, retry training\n");
-               if (bgx->use_training) {
+               if (lmac->use_training) {
                        cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT);
                        if (!(cfg & (1ull << 13))) {
                                cfg = (1ull << 13) | (1ull << 14);
@@ -599,7 +599,7 @@ static int bgx_xaui_check_link(struct lmac *lmac)
        /* Rx local/remote fault seen.
         * Do lmac reinit to see if condition recovers
         */
-       bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type);
+       bgx_lmac_xaui_init(bgx, lmac);
 
        return -1;
 }
@@ -623,7 +623,7 @@ static void bgx_poll_for_link(struct work_struct *work)
        if ((spu_link & SPU_STATUS1_RCV_LNK) &&
            !(smu_link & SMU_RX_CTL_STATUS)) {
                lmac->link_up = 1;
-               if (lmac->bgx->lmac_type == BGX_MODE_XLAUI)
+               if (lmac->lmac_type == BGX_MODE_XLAUI)
                        lmac->last_speed = 40000;
                else
                        lmac->last_speed = 10000;
@@ -657,13 +657,13 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
        lmac = &bgx->lmac[lmacid];
        lmac->bgx = bgx;
 
-       if (bgx->lmac_type == BGX_MODE_SGMII) {
+       if (lmac->lmac_type == BGX_MODE_SGMII) {
                lmac->is_sgmii = 1;
                if (bgx_lmac_sgmii_init(bgx, lmacid))
                        return -1;
        } else {
                lmac->is_sgmii = 0;
-               if (bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type))
+               if (bgx_lmac_xaui_init(bgx, lmac))
                        return -1;
        }
 
@@ -685,10 +685,10 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
        /* Restore default cfg, incase low level firmware changed it */
        bgx_reg_write(bgx, lmacid, BGX_CMRX_RX_DMAC_CTL, 0x03);
 
-       if ((bgx->lmac_type != BGX_MODE_XFI) &&
-           (bgx->lmac_type != BGX_MODE_XLAUI) &&
-           (bgx->lmac_type != BGX_MODE_40G_KR) &&
-           (bgx->lmac_type != BGX_MODE_10G_KR)) {
+       if ((lmac->lmac_type != BGX_MODE_XFI) &&
+           (lmac->lmac_type != BGX_MODE_XLAUI) &&
+           (lmac->lmac_type != BGX_MODE_40G_KR) &&
+           (lmac->lmac_type != BGX_MODE_10G_KR)) {
                if (!lmac->phydev)
                        return -ENODEV;
 
@@ -753,76 +753,19 @@ static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid)
 
        bgx_flush_dmac_addrs(bgx, lmacid);
 
-       if ((bgx->lmac_type != BGX_MODE_XFI) &&
-           (bgx->lmac_type != BGX_MODE_XLAUI) &&
-           (bgx->lmac_type != BGX_MODE_40G_KR) &&
-           (bgx->lmac_type != BGX_MODE_10G_KR) && lmac->phydev)
+       if ((lmac->lmac_type != BGX_MODE_XFI) &&
+           (lmac->lmac_type != BGX_MODE_XLAUI) &&
+           (lmac->lmac_type != BGX_MODE_40G_KR) &&
+           (lmac->lmac_type != BGX_MODE_10G_KR) && lmac->phydev)
                phy_disconnect(lmac->phydev);
 
        lmac->phydev = NULL;
 }
 
-static void bgx_set_num_ports(struct bgx *bgx)
-{
-       u64 lmac_count;
-
-       switch (bgx->qlm_mode) {
-       case QLM_MODE_SGMII:
-               bgx->lmac_count = 4;
-               bgx->lmac_type = BGX_MODE_SGMII;
-               bgx->lane_to_sds = 0;
-               break;
-       case QLM_MODE_XAUI_1X4:
-               bgx->lmac_count = 1;
-               bgx->lmac_type = BGX_MODE_XAUI;
-               bgx->lane_to_sds = 0xE4;
-                       break;
-       case QLM_MODE_RXAUI_2X2:
-               bgx->lmac_count = 2;
-               bgx->lmac_type = BGX_MODE_RXAUI;
-               bgx->lane_to_sds = 0xE4;
-                       break;
-       case QLM_MODE_XFI_4X1:
-               bgx->lmac_count = 4;
-               bgx->lmac_type = BGX_MODE_XFI;
-               bgx->lane_to_sds = 0;
-               break;
-       case QLM_MODE_XLAUI_1X4:
-               bgx->lmac_count = 1;
-               bgx->lmac_type = BGX_MODE_XLAUI;
-               bgx->lane_to_sds = 0xE4;
-               break;
-       case QLM_MODE_10G_KR_4X1:
-               bgx->lmac_count = 4;
-               bgx->lmac_type = BGX_MODE_10G_KR;
-               bgx->lane_to_sds = 0;
-               bgx->use_training = 1;
-               break;
-       case QLM_MODE_40G_KR4_1X4:
-               bgx->lmac_count = 1;
-               bgx->lmac_type = BGX_MODE_40G_KR;
-               bgx->lane_to_sds = 0xE4;
-               bgx->use_training = 1;
-               break;
-       default:
-               bgx->lmac_count = 0;
-               break;
-       }
-
-       /* Check if low level firmware has programmed LMAC count
-        * based on board type, if yes consider that otherwise
-        * the default static values
-        */
-       lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7;
-       if (lmac_count != 4)
-               bgx->lmac_count = lmac_count;
-}
-
 static void bgx_init_hw(struct bgx *bgx)
 {
        int i;
-
-       bgx_set_num_ports(bgx);
+       struct lmac *lmac;
 
        bgx_reg_modify(bgx, 0, BGX_CMR_GLOBAL_CFG, CMR_GLOBAL_CFG_FCS_STRIP);
        if (bgx_reg_read(bgx, 0, BGX_CMR_BIST_STATUS))
@@ -830,17 +773,9 @@ static void bgx_init_hw(struct bgx *bgx)
 
        /* Set lmac type and lane2serdes mapping */
        for (i = 0; i < bgx->lmac_count; i++) {
-               if (bgx->lmac_type == BGX_MODE_RXAUI) {
-                       if (i)
-                               bgx->lane_to_sds = 0x0e;
-                       else
-                               bgx->lane_to_sds = 0x04;
-                       bgx_reg_write(bgx, i, BGX_CMRX_CFG,
-                                     (bgx->lmac_type << 8) | bgx->lane_to_sds);
-                       continue;
-               }
+               lmac = &bgx->lmac[i];
                bgx_reg_write(bgx, i, BGX_CMRX_CFG,
-                             (bgx->lmac_type << 8) | (bgx->lane_to_sds + i));
+                             (lmac->lmac_type << 8) | lmac->lane_to_sds);
                bgx->lmac[i].lmacid_bd = lmac_count;
                lmac_count++;
        }
@@ -863,58 +798,95 @@ static void bgx_init_hw(struct bgx *bgx)
                bgx_reg_write(bgx, 0, BGX_CMR_RX_STREERING + (i * 8), 0x00);
 }
 
-static void bgx_get_qlm_mode(struct bgx *bgx)
+static void bgx_print_qlm_mode(struct bgx *bgx, u8 lmacid)
 {
        struct device *dev = &bgx->pdev->dev;
-       int lmac_type;
-       int train_en;
-
-       /* Read LMAC0 type to figure out QLM mode
-        * This is configured by low level firmware
-        */
-       lmac_type = bgx_reg_read(bgx, 0, BGX_CMRX_CFG);
-       lmac_type = (lmac_type >> 8) & 0x07;
+       struct lmac *lmac;
+       char str[20];
 
-       train_en = bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) &
-                               SPU_PMD_CRTL_TRAIN_EN;
+       lmac = &bgx->lmac[lmacid];
+       sprintf(str, "BGX%d QLM mode", bgx->bgx_id);
 
-       switch (lmac_type) {
+       switch (lmac->lmac_type) {
        case BGX_MODE_SGMII:
-               bgx->qlm_mode = QLM_MODE_SGMII;
-               dev_info(dev, "BGX%d QLM mode: SGMII\n", bgx->bgx_id);
+               dev_info(dev, "%s: SGMII\n", (char *)str);
                break;
        case BGX_MODE_XAUI:
-               bgx->qlm_mode = QLM_MODE_XAUI_1X4;
-               dev_info(dev, "BGX%d QLM mode: XAUI\n", bgx->bgx_id);
+               dev_info(dev, "%s: XAUI\n", (char *)str);
                break;
        case BGX_MODE_RXAUI:
-               bgx->qlm_mode = QLM_MODE_RXAUI_2X2;
-               dev_info(dev, "BGX%d QLM mode: RXAUI\n", bgx->bgx_id);
+               dev_info(dev, "%s: RXAUI\n", (char *)str);
                break;
        case BGX_MODE_XFI:
-               if (!train_en) {
-                       bgx->qlm_mode = QLM_MODE_XFI_4X1;
-                       dev_info(dev, "BGX%d QLM mode: XFI\n", bgx->bgx_id);
-               } else {
-                       bgx->qlm_mode = QLM_MODE_10G_KR_4X1;
-                       dev_info(dev, "BGX%d QLM mode: 10G_KR\n", bgx->bgx_id);
-               }
+               if (!lmac->use_training)
+                       dev_info(dev, "%s: XFI\n", (char *)str);
+               else
+                       dev_info(dev, "%s: 10G_KR\n", (char *)str);
                break;
        case BGX_MODE_XLAUI:
-               if (!train_en) {
-                       bgx->qlm_mode = QLM_MODE_XLAUI_1X4;
-                       dev_info(dev, "BGX%d QLM mode: XLAUI\n", bgx->bgx_id);
-               } else {
-                       bgx->qlm_mode = QLM_MODE_40G_KR4_1X4;
-                       dev_info(dev, "BGX%d QLM mode: 40G_KR4\n", bgx->bgx_id);
-               }
+               if (!lmac->use_training)
+                       dev_info(dev, "%s: XLAUI\n", (char *)str);
+               else
+                       dev_info(dev, "%s: 40G_KR4\n", (char *)str);
                break;
        default:
-               bgx->qlm_mode = QLM_MODE_SGMII;
-               dev_info(dev, "BGX%d QLM default mode: SGMII\n", bgx->bgx_id);
+               dev_info(dev, "%s: INVALID\n", (char *)str);
        }
 }
 
+static void lmac_set_lane2sds(struct lmac *lmac)
+{
+       switch (lmac->lmac_type) {
+       case BGX_MODE_SGMII:
+       case BGX_MODE_XFI:
+               lmac->lane_to_sds = lmac->lmacid;
+               break;
+       case BGX_MODE_XAUI:
+       case BGX_MODE_XLAUI:
+               lmac->lane_to_sds = 0xE4;
+               break;
+       case BGX_MODE_RXAUI:
+               lmac->lane_to_sds = (lmac->lmacid) ? 0xE : 0x4;
+               break;
+       default:
+               lmac->lane_to_sds = 0;
+               break;
+       }
+}
+
+static void bgx_set_lmac_config(struct bgx *bgx, u8 idx)
+{
+       struct lmac *lmac;
+       u64 cmr_cfg;
+
+       lmac = &bgx->lmac[idx];
+       lmac->lmacid = idx;
+
+       /* Read LMAC0 type to figure out QLM mode
+        * This is configured by low level firmware
+        */
+       cmr_cfg = bgx_reg_read(bgx, 0, BGX_CMRX_CFG);
+       lmac->lmac_type = (cmr_cfg >> 8) & 0x07;
+       lmac->use_training =
+               bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) &
+                       SPU_PMD_CRTL_TRAIN_EN;
+       lmac_set_lane2sds(lmac);
+}
+
+static void bgx_get_qlm_mode(struct bgx *bgx)
+{
+       u8  idx;
+
+       /* It is assumed that low level firmware sets this value */
+       bgx->lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7;
+       if (bgx->lmac_count > MAX_LMAC_PER_BGX)
+               bgx->lmac_count = MAX_LMAC_PER_BGX;
+
+       for (idx = 0; idx < bgx->lmac_count; idx++)
+               bgx_set_lmac_config(bgx, idx);
+       bgx_print_qlm_mode(bgx, 0);
+}
+
 #ifdef CONFIG_ACPI
 
 static int acpi_get_mac_address(struct device *dev, struct acpi_device *adev,
index 9f5e49a917839b08e0d55c898d64f401d8553bbb..b7b91c857dbabe05e1bfc10fa110d124200b2be6 100644 (file)
@@ -217,14 +217,4 @@ enum LMAC_TYPE {
        BGX_MODE_40G_KR = 4,/* 4 lanes, 10.3125 Gbaud */
 };
 
-enum qlm_mode {
-       QLM_MODE_SGMII,         /* SGMII, each lane independent */
-       QLM_MODE_XAUI_1X4,      /* 1 XAUI or DXAUI, 4 lanes */
-       QLM_MODE_RXAUI_2X2,     /* 2 RXAUI, 2 lanes each */
-       QLM_MODE_XFI_4X1,       /* 4 XFI, 1 lane each */
-       QLM_MODE_XLAUI_1X4,     /* 1 XLAUI, 4 lanes each */
-       QLM_MODE_10G_KR_4X1,    /* 4 10GBASE-KR, 1 lane each */
-       QLM_MODE_40G_KR4_1X4,   /* 1 40GBASE-KR4, 4 lanes each */
-};
-
 #endif /* THUNDER_BGX_H */