spi/imx: add support for imx51's eCSPI and CSPI

i.MX51 comes with two eCSPI interfaces (that are quite different from
what was known before---the tried and tested Freescale way) and a CSPI
interface that is identical to the devices found on i.MX25 and i.MX35.

This patch is a merge of two very similar patches (by Jason Wang and Sascha
Hauer resp.) plus a (now hopefully correct) reimplementation of the
clock calculation.

Acked-by: Jason Wang <jason77.wang@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4e9d77bc7d2fc8d53716e245e6e28e1038d5599f..7e631fa51098906f4406ed12c29f50aa6808f724 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -153,7 +153,10 @@ config SPI_IMX_VER_0_4
        def_bool y if ARCH_MX31
 
 config SPI_IMX_VER_0_7
-       def_bool y if ARCH_MX25 || ARCH_MX35
+       def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51
+
+config SPI_IMX_VER_2_3
+       def_bool y if ARCH_MX51
 
 config SPI_IMX
        tristate "Freescale i.MX SPI controllers"

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 23db9840b9ae70a86d26344cc4dac3793c65f48f..6bab2cfd93c1191dc74ccc5f2a25e22dcc493e7e 100644 (file)
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -65,6 +65,7 @@ enum spi_imx_devtype {
        SPI_IMX_VER_0_4,
        SPI_IMX_VER_0_5,
        SPI_IMX_VER_0_7,
+       SPI_IMX_VER_2_3,
        SPI_IMX_VER_AUTODETECT,
 };
 
@@ -155,7 +156,7 @@ static unsigned int spi_imx_clkdiv_1(unsigned int fin,
        return max;
 }
 
-/* MX1, MX31, MX35 */
+/* MX1, MX31, MX35, MX51 CSPI */
 static unsigned int spi_imx_clkdiv_2(unsigned int fin,
                unsigned int fspi)
 {
@@ -170,6 +171,128 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
        return 7;
 }
 
+#define SPI_IMX2_3_CTRL                0x08
+#define SPI_IMX2_3_CTRL_ENABLE         (1 <<  0)
+#define SPI_IMX2_3_CTRL_XCH            (1 <<  2)
+#define SPI_IMX2_3_CTRL_MODE(cs)       (1 << ((cs) +  4))
+#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8
+#define SPI_IMX2_3_CTRL_PREDIV_OFFSET  12
+#define SPI_IMX2_3_CTRL_CS(cs)         ((cs) << 18)
+#define SPI_IMX2_3_CTRL_BL_OFFSET      20
+
+#define SPI_IMX2_3_CONFIG      0x0c
+#define SPI_IMX2_3_CONFIG_SCLKPHA(cs)  (1 << ((cs) +  0))
+#define SPI_IMX2_3_CONFIG_SCLKPOL(cs)  (1 << ((cs) +  4))
+#define SPI_IMX2_3_CONFIG_SBBCTRL(cs)  (1 << ((cs) +  8))
+#define SPI_IMX2_3_CONFIG_SSBPOL(cs)   (1 << ((cs) + 12))
+
+#define SPI_IMX2_3_INT         0x10
+#define SPI_IMX2_3_INT_TEEN            (1 <<  0)
+#define SPI_IMX2_3_INT_RREN            (1 <<  3)
+
+#define SPI_IMX2_3_STAT                0x18
+#define SPI_IMX2_3_STAT_RR             (1 <<  3)
+
+/* MX51 eCSPI */
+static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
+{
+       /*
+        * there are two 4-bit dividers, the pre-divider divides by
+        * $pre, the post-divider by 2^$post
+        */
+       unsigned int pre, post;
+
+       if (unlikely(fspi > fin))
+               return 0;
+
+       post = fls(fin) - fls(fspi);
+       if (fin > fspi << post)
+               post++;
+
+       /* now we have: (fin <= fspi << post) with post being minimal */
+
+       post = max(4U, post) - 4;
+       if (unlikely(post > 0xf)) {
+               pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
+                               __func__, fspi, fin);
+               return 0xff;
+       }
+
+       pre = DIV_ROUND_UP(fin, fspi << post) - 1;
+
+       pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+                       __func__, fin, fspi, post, pre);
+       return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) |
+               (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET);
+}
+
+static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+       unsigned val = 0;
+
+       if (enable & MXC_INT_TE)
+               val |= SPI_IMX2_3_INT_TEEN;
+
+       if (enable & MXC_INT_RR)
+               val |= SPI_IMX2_3_INT_RREN;
+
+       writel(val, spi_imx->base + SPI_IMX2_3_INT);
+}
+
+static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx)
+{
+       u32 reg;
+
+       reg = readl(spi_imx->base + SPI_IMX2_3_CTRL);
+       reg |= SPI_IMX2_3_CTRL_XCH;
+       writel(reg, spi_imx->base + SPI_IMX2_3_CTRL);
+}
+
+static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
+               struct spi_imx_config *config)
+{
+       u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0;
+
+       /* set master mode */
+       ctrl |= SPI_IMX2_3_CTRL_MODE(config->cs);
+
+       /* set clock speed */
+       ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);
+
+       /* set chip select to use */
+       ctrl |= SPI_IMX2_3_CTRL_CS(config->cs);
+
+       ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET;
+
+       cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs);
+
+       if (config->mode & SPI_CPHA)
+               cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs);
+
+       if (config->mode & SPI_CPOL)
+               cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs);
+
+       if (config->mode & SPI_CS_HIGH)
+               cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs);
+
+       writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL);
+       writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG);
+
+       return 0;
+}
+
+static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx)
+{
+       return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR;
+}
+
+static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx)
+{
+       /* drain receive buffer */
+       while (spi_imx2_3_rx_available(spi_imx))
+               readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
 #define MX31_INTREG_TEEN       (1 << 0)
 #define MX31_INTREG_RREN       (1 << 3)
 
@@ -447,6 +570,15 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
                .reset = spi_imx0_4_reset,
        },
 #endif
+#ifdef CONFIG_SPI_IMX_VER_2_3
+       [SPI_IMX_VER_2_3] = {
+               .intctrl = spi_imx2_3_intctrl,
+               .config = spi_imx2_3_config,
+               .trigger = spi_imx2_3_trigger,
+               .rx_available = spi_imx2_3_rx_available,
+               .reset = spi_imx2_3_reset,
+       },
+#endif
 };
 
 static void spi_imx_chipselect(struct spi_device *spi, int is_active)
@@ -602,6 +734,12 @@ static struct platform_device_id spi_imx_devtype[] = {
        }, {
                .name = "imx35-cspi",
                .driver_data = SPI_IMX_VER_0_7,
+       }, {
+               .name = "imx51-cspi",
+               .driver_data = SPI_IMX_VER_0_7,
+       }, {
+               .name = "imx51-ecspi",
+               .driver_data = SPI_IMX_VER_2_3,
        }, {
                /* sentinel */
        }