[media] media: adv7343: accept configuration through platform data

The current code was implemented with some default configurations,
this default configuration works on board and doesn't work on other.
This patch accepts the configuration through platform data and configures
the encoder depending on the data passed.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/i2c/adv7343.c b/drivers/media/i2c/adv7343.c
index 432eb5f7a0e515ba7d1a8262ece5a37e6d7a87df..9fc2b985df0e191e4a0b7f908180b1e5d6ca6c5b 100644 (file)
--- a/drivers/media/i2c/adv7343.c
+++ b/drivers/media/i2c/adv7343.c
@@ -43,6 +43,7 @@ MODULE_PARM_DESC(debug, "Debug level 0-1");
 struct adv7343_state {
        struct v4l2_subdev sd;
        struct v4l2_ctrl_handler hdl;
+       const struct adv7343_platform_data *pdata;
        u8 reg00;
        u8 reg01;
        u8 reg02;
@@ -215,12 +216,23 @@ static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
        /* Enable Appropriate DAC */
        val = state->reg00 & 0x03;
 
-       if (output_type == ADV7343_COMPOSITE_ID)
-               val |= ADV7343_COMPOSITE_POWER_VALUE;
-       else if (output_type == ADV7343_COMPONENT_ID)
-               val |= ADV7343_COMPONENT_POWER_VALUE;
+       /* configure default configuration */
+       if (!state->pdata)
+               if (output_type == ADV7343_COMPOSITE_ID)
+                       val |= ADV7343_COMPOSITE_POWER_VALUE;
+               else if (output_type == ADV7343_COMPONENT_ID)
+                       val |= ADV7343_COMPONENT_POWER_VALUE;
+               else
+                       val |= ADV7343_SVIDEO_POWER_VALUE;
        else
-               val |= ADV7343_SVIDEO_POWER_VALUE;
+               val = state->pdata->mode_config.sleep_mode << 0 |
+                     state->pdata->mode_config.pll_control << 1 |
+                     state->pdata->mode_config.dac_3 << 2 |
+                     state->pdata->mode_config.dac_2 << 3 |
+                     state->pdata->mode_config.dac_1 << 4 |
+                     state->pdata->mode_config.dac_6 << 5 |
+                     state->pdata->mode_config.dac_5 << 6 |
+                     state->pdata->mode_config.dac_4 << 7;
 
        err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val);
        if (err < 0)
@@ -238,6 +250,17 @@ static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
 
        /* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */
        val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI);
+
+       if (state->pdata && state->pdata->sd_config.sd_dac_out1)
+               val = val | (state->pdata->sd_config.sd_dac_out1 << 1);
+       else if (state->pdata && !state->pdata->sd_config.sd_dac_out1)
+               val = val & ~(state->pdata->sd_config.sd_dac_out1 << 1);
+
+       if (state->pdata && state->pdata->sd_config.sd_dac_out2)
+               val = val | (state->pdata->sd_config.sd_dac_out2 << 2);
+       else if (state->pdata && !state->pdata->sd_config.sd_dac_out2)
+               val = val & ~(state->pdata->sd_config.sd_dac_out2 << 2);
+
        err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val);
        if (err < 0)
                goto setoutput_exit;
@@ -402,6 +425,9 @@ static int adv7343_probe(struct i2c_client *client,
        if (state == NULL)
                return -ENOMEM;
 
+       /* Copy board specific information here */
+       state->pdata = client->dev.platform_data;
+
        state->reg00    = 0x80;
        state->reg01    = 0x00;
        state->reg02    = 0x20;

diff --git a/include/media/adv7343.h b/include/media/adv7343.h
index d6f8a4e1a1fcfce595e05c2851fa006bd8eb9c4b..944757be49bbf7ef4005202d2f20e71b1fc3fc44 100644 (file)
--- a/include/media/adv7343.h
+++ b/include/media/adv7343.h
@@ -20,4 +20,56 @@
 #define ADV7343_COMPONENT_ID   (1)
 #define ADV7343_SVIDEO_ID      (2)
 
+/**
+ * adv7343_power_mode - power mode configuration.
+ * @sleep_mode: on enable the current consumption is reduced to micro ampere
+ *             level. All DACs and the internal PLL circuit are disabled.
+ *             Registers can be read from and written in sleep mode.
+ * @pll_control: PLL and oversampling control. This control allows internal
+ *              PLL 1 circuit to be powered down and the oversampling to be
+ *              switched off.
+ * @dac_1: power on/off DAC 1.
+ * @dac_2: power on/off DAC 2.
+ * @dac_3: power on/off DAC 3.
+ * @dac_4: power on/off DAC 4.
+ * @dac_5: power on/off DAC 5.
+ * @dac_6: power on/off DAC 6.
+ *
+ * Power mode register (Register 0x0), for more info refer REGISTER MAP ACCESS
+ * section of datasheet[1], table 17 page no 30.
+ *
+ * [1] http://www.analog.com/static/imported-files/data_sheets/ADV7342_7343.pdf
+ */
+struct adv7343_power_mode {
+       bool sleep_mode;
+       bool pll_control;
+       bool dac_1;
+       bool dac_2;
+       bool dac_3;
+       bool dac_4;
+       bool dac_5;
+       bool dac_6;
+};
+
+/**
+ * struct adv7343_sd_config - SD Only Output Configuration.
+ * @sd_dac_out1: Configure SD DAC Output 1.
+ * @sd_dac_out2: Configure SD DAC Output 2.
+ */
+struct adv7343_sd_config {
+       /* SD only Output Configuration */
+       bool sd_dac_out1;
+       bool sd_dac_out2;
+};
+
+/**
+ * struct adv7343_platform_data - Platform data values and access functions.
+ * @mode_config: Configuration for power mode.
+ * @sd_config: SD Only Configuration.
+ */
+struct adv7343_platform_data {
+       struct adv7343_power_mode mode_config;
+       struct adv7343_sd_config sd_config;
+};
+
 #endif                         /* End of #ifndef ADV7343_H */