Phy: Add DT nodes on kirkwood and Dove for the SATA PHY

Add nodes for the two SATA PHYs on kirkwood.
Add node for the one SATA PHY on Dove.
Add pHandles to the PHYs in the sata nodes.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 852db2860015f277064fc817d3b0f592a44bf00a..8de1031233ae578dc45f6e9db8f78b1d951f085a 100644 (file)
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -336,10 +336,21 @@
                                reg = <0xa0000 0x2400>;
                                interrupts = <62>;
                                clocks = <&gate_clk 3>;
+                               phys = <&sata_phy0>;
+                               phy-names = "port0";
                                nr-ports = <1>;
                                status = "disabled";
                        };
 
+                       sata_phy0: sata-phy@a2000 {
+                               compatible = "marvell,mvebu-sata-phy";
+                               reg = <0xa2000 0x0334>;
+                               clocks = <&gate_clk 3>;
+                               clock-names = "sata";
+                               #phy-cells = <0>;
+                               status = "ok";
+                       };
+
                        audio0: audio-controller@b0000 {
                                compatible = "marvell,dove-audio";
                                reg = <0xb0000 0x2210>;

diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index e4e1968dfca8abe05defd5ebe6ced71cbe88df95..416d96e1302fab6e9af0d61ebb5cdbbe0290cfa7 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -89,6 +89,8 @@
                        interrupts = <21>;
                        clocks = <&gate_clk 14>, <&gate_clk 15>;
                        clock-names = "0", "1";
+                       phys = <&sata_phy0>, <&sata_phy1>;
+                       phy-names = "port0", "port1";
                        status = "disabled";
                };
 

diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index f010c21220bf8dd485cb1dd3cdee0f881223b23f..a4fec043216851544e63bf1fb83bc2c5fdfeb902 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -117,6 +117,8 @@
                        interrupts = <21>;
                        clocks = <&gate_clk 14>, <&gate_clk 15>;
                        clock-names = "0", "1";
+                       phys = <&sata_phy0>, <&sata_phy1>;
+                       phy-names = "port0", "port1";
                        status = "disabled";
                };
 

diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 1da94c187085444ecdc0aaac741dc6ddebf11ee8..81e6c409284e8a42ad68373bee24570151cde287 100644 (file)
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -284,5 +284,23 @@
                                /* set phy-handle property in board file */
                        };
                };
+
+               sata_phy0: sata-phy@82000 {
+                       compatible = "marvell,mvebu-sata-phy";
+                       reg = <0x82000 0x0334>;
+                       clocks = <&gate_clk 14>;
+                       clock-names = "sata";
+                       #phy-cells = <0>;
+                       status = "ok";
+               };
+
+               sata_phy1: sata-phy@84000 {
+                       compatible = "marvell,mvebu-sata-phy";
+                       reg = <0x84000 0x0334>;
+                       clocks = <&gate_clk 15>;
+                       clock-names = "sata";
+                       #phy-cells = <0>;
+                       status = "ok";
+               };
        };
 };