pwm: Add support for configuring the PWM polarity
authorPhilip, Avinash <avinashphilip@ti.com>
Tue, 24 Jul 2012 14:05:32 +0000 (19:35 +0530)
committerThierry Reding <thierry.reding@avionic-design.de>
Mon, 10 Sep 2012 15:05:44 +0000 (17:05 +0200)
Some hardware supports inverting the polarity of the PWM signal. This
commit adds support to the PWM framework to allow users of the PWM API
to configure the polarity. Note that in order to reduce complexity,
changing the polarity of a PWM signal is only allowed while the PWM is
disabled.

A practical example where this can prove useful is to simulate inversion
of the duty cycle. While inversion of polarity and duty cycle are not
exactly the same, the differences for most use-cases are negligible.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
drivers/pwm/core.c
include/linux/pwm.h

index c6e05078d3adaff05708cc11ce76ea97763a375b..85592e97ef2d7ffe00a5fc7438e2129ae4f1a13d 100644 (file)
@@ -378,6 +378,28 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 }
 EXPORT_SYMBOL_GPL(pwm_config);
 
+/**
+ * pwm_set_polarity() - configure the polarity of a PWM signal
+ * @pwm: PWM device
+ * @polarity: new polarity of the PWM signal
+ *
+ * Note that the polarity cannot be configured while the PWM device is enabled
+ */
+int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity)
+{
+       if (!pwm || !pwm->chip->ops)
+               return -EINVAL;
+
+       if (!pwm->chip->ops->set_polarity)
+               return -ENOSYS;
+
+       if (test_bit(PWMF_ENABLED, &pwm->flags))
+               return -EBUSY;
+
+       return pwm->chip->ops->set_polarity(pwm->chip, pwm, polarity);
+}
+EXPORT_SYMBOL_GPL(pwm_set_polarity);
+
 /**
  * pwm_enable() - start a PWM output toggling
  * @pwm: PWM device
index 21d076c5089e9646418113fb9d27d30e4ba109f7..354764cf5f7a73428ff02ac4df72b23c7313e55b 100644 (file)
@@ -34,6 +34,20 @@ void pwm_disable(struct pwm_device *pwm);
 #ifdef CONFIG_PWM
 struct pwm_chip;
 
+/**
+ * enum pwm_polarity - polarity of a PWM signal
+ * @PWM_POLARITY_NORMAL: a high signal for the duration of the duty-
+ * cycle, followed by a low signal for the remainder of the pulse
+ * period
+ * @PWM_POLARITY_INVERSED: a low signal for the duration of the duty-
+ * cycle, followed by a high signal for the remainder of the pulse
+ * period
+ */
+enum pwm_polarity {
+       PWM_POLARITY_NORMAL,
+       PWM_POLARITY_INVERSED,
+};
+
 enum {
        PWMF_REQUESTED = 1 << 0,
        PWMF_ENABLED = 1 << 1,
@@ -61,11 +75,17 @@ static inline unsigned int pwm_get_period(struct pwm_device *pwm)
        return pwm ? pwm->period : 0;
 }
 
+/*
+ * pwm_set_polarity - configure the polarity of a PWM signal
+ */
+int pwm_set_polarity(struct pwm_device *pwm, enum pwm_polarity polarity);
+
 /**
  * struct pwm_ops - PWM controller operations
  * @request: optional hook for requesting a PWM
  * @free: optional hook for freeing a PWM
  * @config: configure duty cycles and period length for this PWM
+ * @set_polarity: configure the polarity of this PWM
  * @enable: enable PWM output toggling
  * @disable: disable PWM output toggling
  * @dbg_show: optional routine to show contents in debugfs
@@ -79,6 +99,9 @@ struct pwm_ops {
        int                     (*config)(struct pwm_chip *chip,
                                          struct pwm_device *pwm,
                                          int duty_ns, int period_ns);
+       int                     (*set_polarity)(struct pwm_chip *chip,
+                                         struct pwm_device *pwm,
+                                         enum pwm_polarity polarity);
        int                     (*enable)(struct pwm_chip *chip,
                                          struct pwm_device *pwm);
        void                    (*disable)(struct pwm_chip *chip,