return max_pixclk;
}
-static int valleyview_modeset_global_pipes(struct drm_atomic_state *state,
- unsigned *prepare_pipes)
+static int valleyview_modeset_global_pipes(struct drm_atomic_state *state)
{
struct drm_i915_private *dev_priv = to_i915(state->dev);
- struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
int max_pixclk = intel_mode_max_pixclk(state);
- int cdclk;
+ int cdclk, i;
if (max_pixclk < 0)
return max_pixclk;
if (cdclk == dev_priv->cdclk_freq)
return 0;
+ /* add all active pipes to the state */
+ for_each_crtc(state->dev, crtc) {
+ if (!crtc->state->enable)
+ continue;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+ }
+
/* disable/enable all currently active pipes while we change cdclk */
- for_each_intel_crtc(state->dev, intel_crtc)
- if (intel_crtc->base.state->enable)
- *prepare_pipes |= (1 << intel_crtc->pipe);
+ for_each_crtc_in_state(state, crtc, crtc_state, i)
+ if (crtc_state->enable)
+ crtc_state->mode_changed = true;
return 0;
}
return ret;
}
-/* Computes which crtcs are affected and sets the relevant bits in the mask. For
- * simplicity we use the crtc's pipe number (because it's easier to obtain). */
-static void
-intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
- unsigned *prepare_pipes, unsigned *disable_pipes)
-{
- struct intel_crtc *intel_crtc;
- struct drm_device *dev = crtc->dev;
- struct intel_encoder *encoder;
- struct intel_connector *connector;
- struct drm_crtc *tmp_crtc;
-
- *disable_pipes = *modeset_pipes = *prepare_pipes = 0;
-
- /* Check which crtcs have changed outputs connected to them, these need
- * to be part of the prepare_pipes mask. We don't (yet) support global
- * modeset across multiple crtcs, so modeset_pipes will only have one
- * bit set at most. */
- for_each_intel_connector(dev, connector) {
- if (connector->base.encoder == &connector->new_encoder->base)
- continue;
-
- if (connector->base.encoder) {
- tmp_crtc = connector->base.encoder->crtc;
-
- *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
- }
-
- if (connector->new_encoder)
- *prepare_pipes |=
- 1 << connector->new_encoder->new_crtc->pipe;
- }
-
- for_each_intel_encoder(dev, encoder) {
- if (encoder->base.crtc == &encoder->new_crtc->base)
- continue;
-
- if (encoder->base.crtc) {
- tmp_crtc = encoder->base.crtc;
-
- *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe;
- }
-
- if (encoder->new_crtc)
- *prepare_pipes |= 1 << encoder->new_crtc->pipe;
- }
-
- /* Check for pipes that will be enabled/disabled ... */
- for_each_intel_crtc(dev, intel_crtc) {
- if (intel_crtc->base.state->enable == intel_crtc->new_enabled)
- continue;
-
- if (!intel_crtc->new_enabled)
- *disable_pipes |= 1 << intel_crtc->pipe;
- else
- *prepare_pipes |= 1 << intel_crtc->pipe;
- }
-
-
- /* set_mode is also used to update properties on life display pipes. */
- intel_crtc = to_intel_crtc(crtc);
- if (intel_crtc->new_enabled)
- *prepare_pipes |= 1 << intel_crtc->pipe;
-
- /*
- * For simplicity do a full modeset on any pipe where the output routing
- * changed. We could be more clever, but that would require us to be
- * more careful with calling the relevant encoder->mode_set functions.
- */
- if (*prepare_pipes)
- *modeset_pipes = *prepare_pipes;
-
- /* ... and mask these out. */
- *modeset_pipes &= ~(*disable_pipes);
- *prepare_pipes &= ~(*disable_pipes);
-
- /*
- * HACK: We don't (yet) fully support global modesets. intel_set_config
- * obies this rule, but the modeset restore mode of
- * intel_modeset_setup_hw_state does not.
- */
- *modeset_pipes &= 1 << intel_crtc->pipe;
- *prepare_pipes &= 1 << intel_crtc->pipe;
-
- DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n",
- *modeset_pipes, *prepare_pipes, *disable_pipes);
-}
-
static bool intel_crtc_in_use(struct drm_crtc *crtc)
{
struct drm_encoder *encoder;
return false;
}
+static bool
+needs_modeset(struct drm_crtc_state *state)
+{
+ return state->mode_changed || state->active_changed;
+}
+
static void
-intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
+intel_modeset_update_state(struct drm_atomic_state *state)
{
+ struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder;
- struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
struct drm_connector *connector;
+ int i;
intel_shared_dpll_commit(dev_priv);
if (!intel_encoder->base.crtc)
continue;
- intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
+ for_each_crtc_in_state(state, crtc, crtc_state, i)
+ if (crtc == intel_encoder->base.crtc)
+ break;
- if (prepare_pipes & (1 << intel_crtc->pipe))
+ if (crtc != intel_encoder->base.crtc)
+ continue;
+
+ if (crtc_state->enable && needs_modeset(crtc_state))
intel_encoder->connectors_active = false;
}
intel_modeset_commit_output_state(dev);
/* Double check state. */
- for_each_intel_crtc(dev, intel_crtc) {
- WARN_ON(intel_crtc->base.state->enable != intel_crtc_in_use(&intel_crtc->base));
+ for_each_crtc(dev, crtc) {
+ WARN_ON(crtc->state->enable != intel_crtc_in_use(crtc));
}
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (!connector->encoder || !connector->encoder->crtc)
continue;
- intel_crtc = to_intel_crtc(connector->encoder->crtc);
+ for_each_crtc_in_state(state, crtc, crtc_state, i)
+ if (crtc == connector->encoder->crtc)
+ break;
+
+ if (crtc != connector->encoder->crtc)
+ continue;
- if (prepare_pipes & (1 << intel_crtc->pipe)) {
+ if (crtc_state->enable && needs_modeset(crtc_state)) {
struct drm_property *dpms_property =
dev->mode_config.dpms_property;
crtc->scanline_offset = 1;
}
+static void
+intel_atomic_modeset_compute_changed_flags(struct drm_atomic_state *state,
+ struct drm_crtc *modeset_crtc)
+{
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc *crtc;
+ int i;
+
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (crtc_state->enable != crtc->state->enable)
+ crtc_state->mode_changed = true;
+
+ /* FIXME: Do we need to always set mode_changed for
+ * modeset_crtc if it is enabled? modeset_affect_pipes()
+ * did that. */
+ }
+}
+
static struct intel_crtc_state *
intel_modeset_compute_config(struct drm_crtc *crtc,
struct drm_display_mode *mode,
- struct drm_atomic_state *state,
- unsigned *modeset_pipes,
- unsigned *prepare_pipes,
- unsigned *disable_pipes)
+ struct drm_atomic_state *state)
{
struct intel_crtc_state *pipe_config;
int ret = 0;
if (ret)
return ERR_PTR(ret);
- intel_modeset_affected_pipes(crtc, modeset_pipes,
- prepare_pipes, disable_pipes);
+ intel_atomic_modeset_compute_changed_flags(state, crtc);
/*
* Note this needs changes when we start tracking multiple modes
return pipe_config;
}
-static int __intel_set_mode_setup_plls(struct drm_atomic_state *state,
- unsigned modeset_pipes,
- unsigned disable_pipes)
+static int __intel_set_mode_setup_plls(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- unsigned clear_pipes = modeset_pipes | disable_pipes;
+ unsigned clear_pipes = 0;
struct intel_crtc *intel_crtc;
+ struct intel_crtc_state *intel_crtc_state;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
int ret = 0;
+ int i;
if (!dev_priv->display.crtc_compute_clock)
return 0;
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ intel_crtc = to_intel_crtc(crtc);
+
+ if (needs_modeset(crtc_state))
+ clear_pipes |= 1 << intel_crtc->pipe;
+ }
+
ret = intel_shared_dpll_start_config(dev_priv, clear_pipes);
if (ret)
goto done;
- for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
- struct intel_crtc_state *crtc_state =
- intel_atomic_get_crtc_state(state, intel_crtc);
-
- /* Modeset pipes should have a new state by now */
- if (WARN_ON(IS_ERR(crtc_state)))
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (!needs_modeset(crtc_state) || !crtc_state->enable)
continue;
+ intel_crtc = to_intel_crtc(crtc);
+ intel_crtc_state = to_intel_crtc_state(crtc_state);
+
ret = dev_priv->display.crtc_compute_clock(intel_crtc,
- crtc_state);
+ intel_crtc_state);
if (ret) {
intel_shared_dpll_abort_config(dev_priv);
goto done;
return ret;
}
-static int __intel_set_mode(struct drm_crtc *crtc,
+static int __intel_set_mode(struct drm_crtc *modeset_crtc,
struct drm_display_mode *mode,
int x, int y, struct drm_framebuffer *fb,
- struct intel_crtc_state *pipe_config,
- unsigned modeset_pipes,
- unsigned prepare_pipes,
- unsigned disable_pipes)
+ struct intel_crtc_state *pipe_config)
{
- struct drm_device *dev = crtc->dev;
+ struct drm_device *dev = modeset_crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *saved_mode;
struct drm_atomic_state *state = pipe_config->base.state;
struct intel_crtc_state *crtc_state_copy = NULL;
struct intel_crtc *intel_crtc;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
int ret = 0;
+ int i;
saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
if (!saved_mode)
goto done;
}
- *saved_mode = crtc->mode;
+ *saved_mode = modeset_crtc->mode;
/*
* See if the config requires any additional preparation, e.g.
* adjusted_mode bits in the crtc directly.
*/
if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) {
- ret = valleyview_modeset_global_pipes(state, &prepare_pipes);
+ ret = valleyview_modeset_global_pipes(state);
if (ret)
goto done;
-
- /* may have added more to prepare_pipes than we should */
- prepare_pipes &= ~disable_pipes;
}
- ret = __intel_set_mode_setup_plls(state, modeset_pipes, disable_pipes);
+ ret = __intel_set_mode_setup_plls(state);
if (ret)
goto done;
- for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc)
- intel_crtc_disable(&intel_crtc->base);
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (!needs_modeset(crtc_state))
+ continue;
- for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
- if (intel_crtc->base.state->enable) {
- intel_crtc_disable_planes(&intel_crtc->base);
- dev_priv->display.crtc_disable(&intel_crtc->base);
+ if (!crtc_state->enable) {
+ intel_crtc_disable(crtc);
+ } else if (crtc->state->enable) {
+ intel_crtc_disable_planes(crtc);
+ dev_priv->display.crtc_disable(crtc);
}
}
* pipes; here we assume a single modeset_pipe and only track the
* single crtc and mode.
*/
- if (modeset_pipes) {
- crtc->mode = *mode;
+ if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
+ modeset_crtc->mode = *mode;
/* mode_set/enable/disable functions rely on a correct pipe
* config. */
- intel_crtc_set_state(to_intel_crtc(crtc), pipe_config);
+ intel_crtc_set_state(to_intel_crtc(modeset_crtc), pipe_config);
/*
* Calculate and store various constants which
* are later needed by vblank and swap-completion
* timestamping. They are derived from true hwmode.
*/
- drm_calc_timestamping_constants(crtc,
+ drm_calc_timestamping_constants(modeset_crtc,
&pipe_config->base.adjusted_mode);
}
/* Only after disabling all output pipelines that will be changed can we
* update the the output configuration. */
- intel_modeset_update_state(dev, prepare_pipes);
+ intel_modeset_update_state(state);
modeset_update_crtc_power_domains(state);
- for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) {
- struct drm_plane *primary = intel_crtc->base.primary;
+ if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
+ struct drm_plane *primary;
int vdisplay, hdisplay;
+ intel_crtc = to_intel_crtc(modeset_crtc);
+ primary = intel_crtc->base.primary;
+
drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay);
+
ret = drm_plane_helper_update(primary, &intel_crtc->base,
fb, 0, 0,
hdisplay, vdisplay,
}
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
- for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) {
- update_scanline_offset(intel_crtc);
+ for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (!needs_modeset(crtc_state) || !crtc_state->enable)
+ continue;
+
+ update_scanline_offset(to_intel_crtc(crtc));
- dev_priv->display.crtc_enable(&intel_crtc->base);
- intel_crtc_enable_planes(&intel_crtc->base);
+ dev_priv->display.crtc_enable(crtc);
+ intel_crtc_enable_planes(crtc);
}
/* FIXME: add subpixel order */
done:
- if (ret && crtc->state->enable)
- crtc->mode = *saved_mode;
+ if (ret && modeset_crtc->state->enable)
+ modeset_crtc->mode = *saved_mode;
if (ret == 0 && pipe_config) {
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc *intel_crtc = to_intel_crtc(modeset_crtc);
/* The pipe_config will be freed with the atomic state, so
* make a copy. */
return ret;
}
-static int intel_set_mode_pipes(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *fb,
- struct intel_crtc_state *pipe_config,
- unsigned modeset_pipes,
- unsigned prepare_pipes,
- unsigned disable_pipes)
+static int intel_set_mode_with_config(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y, struct drm_framebuffer *fb,
+ struct intel_crtc_state *pipe_config)
{
int ret;
- ret = __intel_set_mode(crtc, mode, x, y, fb, pipe_config, modeset_pipes,
- prepare_pipes, disable_pipes);
+ ret = __intel_set_mode(crtc, mode, x, y, fb, pipe_config);
if (ret == 0)
intel_modeset_check_state(crtc->dev);
struct drm_atomic_state *state)
{
struct intel_crtc_state *pipe_config;
- unsigned modeset_pipes, prepare_pipes, disable_pipes;
int ret = 0;
- pipe_config = intel_modeset_compute_config(crtc, mode, state,
- &modeset_pipes,
- &prepare_pipes,
- &disable_pipes);
-
+ pipe_config = intel_modeset_compute_config(crtc, mode, state);
if (IS_ERR(pipe_config)) {
ret = PTR_ERR(pipe_config);
goto out;
}
- ret = intel_set_mode_pipes(crtc, mode, x, y, fb, pipe_config,
- modeset_pipes, prepare_pipes,
- disable_pipes);
+ ret = intel_set_mode_with_config(crtc, mode, x, y, fb, pipe_config);
if (ret)
goto out;
struct drm_atomic_state *state = NULL;
struct intel_set_config *config;
struct intel_crtc_state *pipe_config;
- unsigned modeset_pipes, prepare_pipes, disable_pipes;
int ret;
BUG_ON(!set);
intel_set_config_compute_mode_changes(set, config);
pipe_config = intel_modeset_compute_config(set->crtc, set->mode,
- state,
- &modeset_pipes,
- &prepare_pipes,
- &disable_pipes);
+ state);
if (IS_ERR(pipe_config)) {
ret = PTR_ERR(pipe_config);
goto fail;
intel_update_pipe_size(to_intel_crtc(set->crtc));
if (config->mode_changed) {
- ret = intel_set_mode_pipes(set->crtc, set->mode,
- set->x, set->y, set->fb, pipe_config,
- modeset_pipes, prepare_pipes,
- disable_pipes);
+ ret = intel_set_mode_with_config(set->crtc, set->mode,
+ set->x, set->y, set->fb,
+ pipe_config);
} else if (config->fb_changed) {
struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
struct drm_plane *primary = set->crtc->primary;
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff