nuc900/rtc: change the waiting for device ready implement
authorWan ZongShun <mcuos.com@gmail.com>
Wed, 11 Aug 2010 01:02:05 +0000 (18:02 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 11 Aug 2010 15:59:06 +0000 (08:59 -0700)
- add an mdelay(1) to the polling loop to cause less frequent access to
  the hardware register.

- change the return value from ENODEV to EPERM if the loop timed out.  I
  think the 'Operation not permitted' description is more suitable for the
  meaning of 'check_rtc_access_enable()' function, it just be used to
  judge rtc access operation is permitted or not.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/rtc-nuc900.c

index a351bd5d81765d785d9b3b41972961446615d12b..21d13309fb20920502b9f598f50764dd58d2ed03 100644 (file)
@@ -85,22 +85,21 @@ static irqreturn_t nuc900_rtc_interrupt(int irq, void *_rtc)
 
 static int *check_rtc_access_enable(struct nuc900_rtc *nuc900_rtc)
 {
-       unsigned int i;
+       unsigned int i, timeout = 0x1000;
        __raw_writel(INIRRESET, nuc900_rtc->rtc_reg + REG_RTC_INIR);
 
        mdelay(10);
 
        __raw_writel(AERPOWERON, nuc900_rtc->rtc_reg + REG_RTC_AER);
 
-       for (i = 0; i < 1000; i++) {
-               if (__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
-                       return 0;
-       }
+       while (!(__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB)
+                                                               && timeout--)
+               mdelay(1);
 
-       if ((__raw_readl(nuc900_rtc->rtc_reg + REG_RTC_AER) & AERRWENB) == 0x0)
-               return ERR_PTR(-ENODEV);
+       if (!timeout)
+               return ERR_PTR(-EPERM);
 
-       return ERR_PTR(-EPERM);
+       return 0;
 }
 
 static void nuc900_rtc_bcd2bin(unsigned int timereg,