[SCSI] qla2xxx: Add APEX support.
authorSarang Radke <sarang.radke@qlogic.com>
Sat, 20 Mar 2010 00:03:59 +0000 (17:03 -0700)
committerJames Bottomley <James.Bottomley@suse.de>
Sun, 11 Apr 2010 14:45:50 +0000 (09:45 -0500)
Allows priority setting for FCP_CMNDs.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
drivers/scsi/qla2xxx/qla_bsg.c
drivers/scsi/qla2xxx/qla_def.h
drivers/scsi/qla2xxx/qla_fw.h
drivers/scsi/qla2xxx/qla_gbl.h
drivers/scsi/qla2xxx/qla_init.c
drivers/scsi/qla2xxx/qla_mbx.c
drivers/scsi/qla2xxx/qla_sup.c

index c20292fde720627d072842ef11dfcfbdfdd31140..3c3a86ca6cbd82308a86546e8419b08c354f86ee 100644 (file)
@@ -35,6 +35,166 @@ done:
        return sp;
 }
 
+int
+qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *pri_cfg, uint8_t flag)
+{
+       int i, ret, num_valid;
+       uint8_t *bcode;
+       struct qla_fcp_prio_entry *pri_entry;
+
+       ret = 1;
+       num_valid = 0;
+       bcode = (uint8_t *)pri_cfg;
+
+       if (bcode[0x0] != 'H' || bcode[0x1] != 'Q' || bcode[0x2] != 'O' ||
+                       bcode[0x3] != 'S') {
+               return 0;
+       }
+       if (flag != 1)
+               return ret;
+
+       pri_entry = &pri_cfg->entry[0];
+       for (i = 0; i < pri_cfg->num_entries; i++) {
+               if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID)
+                       num_valid++;
+               pri_entry++;
+       }
+
+       if (num_valid == 0)
+               ret = 0;
+
+       return ret;
+}
+
+static int
+qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
+{
+       struct Scsi_Host *host = bsg_job->shost;
+       scsi_qla_host_t *vha = shost_priv(host);
+       struct qla_hw_data *ha = vha->hw;
+       int ret = 0;
+       uint32_t len;
+       uint32_t oper;
+
+       bsg_job->reply->reply_payload_rcv_len = 0;
+
+       if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
+               test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
+               test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
+               ret = -EBUSY;
+               goto exit_fcp_prio_cfg;
+       }
+
+       /* Get the sub command */
+       oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
+
+       /* Only set config is allowed if config memory is not allocated */
+       if (!ha->fcp_prio_cfg && (oper != QLFC_FCP_PRIO_SET_CONFIG)) {
+               ret = -EINVAL;
+               goto exit_fcp_prio_cfg;
+       }
+       switch (oper) {
+       case QLFC_FCP_PRIO_DISABLE:
+               if (ha->flags.fcp_prio_enabled) {
+                       ha->flags.fcp_prio_enabled = 0;
+                       ha->fcp_prio_cfg->attributes &=
+                               ~FCP_PRIO_ATTR_ENABLE;
+                       qla24xx_update_all_fcp_prio(vha);
+                       bsg_job->reply->result = DID_OK;
+               } else {
+                       ret = -EINVAL;
+                       bsg_job->reply->result = (DID_ERROR << 16);
+                       goto exit_fcp_prio_cfg;
+               }
+               break;
+
+       case QLFC_FCP_PRIO_ENABLE:
+               if (!ha->flags.fcp_prio_enabled) {
+                       if (ha->fcp_prio_cfg) {
+                               ha->flags.fcp_prio_enabled = 1;
+                               ha->fcp_prio_cfg->attributes |=
+                                   FCP_PRIO_ATTR_ENABLE;
+                               qla24xx_update_all_fcp_prio(vha);
+                               bsg_job->reply->result = DID_OK;
+                       } else {
+                               ret = -EINVAL;
+                               bsg_job->reply->result = (DID_ERROR << 16);
+                               goto exit_fcp_prio_cfg;
+                       }
+               }
+               break;
+
+       case QLFC_FCP_PRIO_GET_CONFIG:
+               len = bsg_job->reply_payload.payload_len;
+               if (!len || len > FCP_PRIO_CFG_SIZE) {
+                       ret = -EINVAL;
+                       bsg_job->reply->result = (DID_ERROR << 16);
+                       goto exit_fcp_prio_cfg;
+               }
+
+               bsg_job->reply->result = DID_OK;
+               bsg_job->reply->reply_payload_rcv_len =
+                       sg_copy_from_buffer(
+                       bsg_job->reply_payload.sg_list,
+                       bsg_job->reply_payload.sg_cnt, ha->fcp_prio_cfg,
+                       len);
+
+               break;
+
+       case QLFC_FCP_PRIO_SET_CONFIG:
+               len = bsg_job->request_payload.payload_len;
+               if (!len || len > FCP_PRIO_CFG_SIZE) {
+                       bsg_job->reply->result = (DID_ERROR << 16);
+                       ret = -EINVAL;
+                       goto exit_fcp_prio_cfg;
+               }
+
+               if (!ha->fcp_prio_cfg) {
+                       ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
+                       if (!ha->fcp_prio_cfg) {
+                               qla_printk(KERN_WARNING, ha,
+                                       "Unable to allocate memory "
+                                       "for fcp prio config data (%x).\n",
+                                       FCP_PRIO_CFG_SIZE);
+                               bsg_job->reply->result = (DID_ERROR << 16);
+                               ret = -ENOMEM;
+                               goto exit_fcp_prio_cfg;
+                       }
+               }
+
+               memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
+               sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+               bsg_job->request_payload.sg_cnt, ha->fcp_prio_cfg,
+                       FCP_PRIO_CFG_SIZE);
+
+               /* validate fcp priority data */
+               if (!qla24xx_fcp_prio_cfg_valid(
+                       (struct qla_fcp_prio_cfg *)
+                       ha->fcp_prio_cfg, 1)) {
+                       bsg_job->reply->result = (DID_ERROR << 16);
+                       ret = -EINVAL;
+                       /* If buffer was invalidatic int
+                        * fcp_prio_cfg is of no use
+                        */
+                       vfree(ha->fcp_prio_cfg);
+                       ha->fcp_prio_cfg = NULL;
+                       goto exit_fcp_prio_cfg;
+               }
+
+               ha->flags.fcp_prio_enabled = 0;
+               if (ha->fcp_prio_cfg->attributes & FCP_PRIO_ATTR_ENABLE)
+                       ha->flags.fcp_prio_enabled = 1;
+               qla24xx_update_all_fcp_prio(vha);
+               bsg_job->reply->result = DID_OK;
+               break;
+       default:
+               ret = -EINVAL;
+               break;
+       }
+exit_fcp_prio_cfg:
+       bsg_job->job_done(bsg_job);
+       return ret;
+}
 static int
 qla2x00_process_els(struct fc_bsg_job *bsg_job)
 {
@@ -948,6 +1108,9 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
        case QL_VND_IIDMA:
                return qla24xx_iidma(bsg_job);
 
+       case QL_VND_FCP_PRIO_CFG_CMD:
+               return qla24xx_proc_fcp_prio_cfg_cmd(bsg_job);
+
        default:
                bsg_job->reply->result = (DID_ERROR << 16);
                bsg_job->job_done(bsg_job);
index 608397bf7e0afc67932e93f57bdbb072dcab994a..c51bd4e5fb44c657deac3ce1e3e73429bebf1aba 100644 (file)
@@ -1580,6 +1580,8 @@ typedef struct fc_port {
        uint16_t loop_id;
        uint16_t old_loop_id;
 
+       uint8_t fcp_prio;
+
        uint8_t fabric_port_name[WWN_SIZE];
        uint16_t fp_speed;
 
@@ -2296,6 +2298,7 @@ struct qla_hw_data {
                uint32_t        eeh_busy                :1;
                uint32_t        cpu_affinity_enabled    :1;
                uint32_t        disable_msix_handshake  :1;
+               uint32_t        fcp_prio_enabled        :1;
        } flags;
 
        /* This spinlock is used to protect "io transactions", you must
@@ -2599,6 +2602,7 @@ struct qla_hw_data {
        uint32_t        flt_region_nvram;
        uint32_t        flt_region_npiv_conf;
        uint32_t        flt_region_gold_fw;
+       uint32_t        flt_region_fcp_prio;
 
        /* Needed for BEACON */
        uint16_t        beacon_blink_led;
@@ -2627,6 +2631,9 @@ struct qla_hw_data {
        struct isp_operations *isp_ops;
        struct workqueue_struct *wq;
        struct qlfc_fw fw_buf;
+
+       /* FCP_CMND priority support */
+       struct qla_fcp_prio_cfg *fcp_prio_cfg;
 };
 
 /*
index 42c5587cc50cd0e8cfdc24edb6e6c038d04cdf0a..a77a2471eaff3e1f96650494e6a73d22d9b6d955 100644 (file)
@@ -841,6 +841,8 @@ struct device_reg_24xx {
 #define FA_HW_EVENT_ENTRY_SIZE 4
 #define FA_NPIV_CONF0_ADDR     0x5C000
 #define FA_NPIV_CONF1_ADDR     0x5D000
+#define FA_FCP_PRIO0_ADDR      0x10000
+#define FA_FCP_PRIO1_ADDR      0x12000
 
 /*
  * Flash Error Log Event Codes.
@@ -1274,6 +1276,8 @@ struct qla_flt_header {
 #define FLT_REG_NPIV_CONF_0    0x29
 #define FLT_REG_NPIV_CONF_1    0x2a
 #define FLT_REG_GOLD_FW                0x2f
+#define FLT_REG_FCP_PRIO_0     0x87
+#define FLT_REG_FCP_PRIO_1     0x88
 
 struct qla_flt_region {
        uint32_t code;
@@ -1750,6 +1754,61 @@ struct ex_init_cb_81xx {
 #define FARX_ACCESS_FLASH_CONF_81XX    0x7FFD0000
 #define FARX_ACCESS_FLASH_DATA_81XX    0x7F800000
 
+/* FCP priority config defines *************************************/
+/* operations */
+#define QLFC_FCP_PRIO_DISABLE           0x0
+#define QLFC_FCP_PRIO_ENABLE            0x1
+#define QLFC_FCP_PRIO_GET_CONFIG        0x2
+#define QLFC_FCP_PRIO_SET_CONFIG        0x3
+
+struct qla_fcp_prio_entry {
+       uint16_t flags;         /* Describes parameter(s) in FCP        */
+       /* priority entry that are valid        */
+#define FCP_PRIO_ENTRY_VALID            0x1
+#define FCP_PRIO_ENTRY_TAG_VALID        0x2
+#define FCP_PRIO_ENTRY_SPID_VALID       0x4
+#define FCP_PRIO_ENTRY_DPID_VALID       0x8
+#define FCP_PRIO_ENTRY_LUNB_VALID       0x10
+#define FCP_PRIO_ENTRY_LUNE_VALID       0x20
+#define FCP_PRIO_ENTRY_SWWN_VALID       0x40
+#define FCP_PRIO_ENTRY_DWWN_VALID       0x80
+       uint8_t  tag;           /* Priority value                   */
+       uint8_t  reserved;      /* Reserved for future use          */
+       uint32_t src_pid;       /* Src port id. high order byte     */
+                               /* unused; -1 (wild card)           */
+       uint32_t dst_pid;       /* Src port id. high order byte     */
+       /* unused; -1 (wild card)           */
+       uint16_t lun_beg;       /* 1st lun num of lun range.        */
+                               /* -1 (wild card)                   */
+       uint16_t lun_end;       /* 2nd lun num of lun range.        */
+                               /* -1 (wild card)                   */
+       uint8_t  src_wwpn[8];   /* Source WWPN: -1 (wild card)      */
+       uint8_t  dst_wwpn[8];   /* Destination WWPN: -1 (wild card) */
+};
+
+struct qla_fcp_prio_cfg {
+       uint8_t  signature[4];  /* "HQOS" signature of config data  */
+       uint16_t version;       /* 1: Initial version               */
+       uint16_t length;        /* config data size in num bytes    */
+       uint16_t checksum;      /* config data bytes checksum       */
+       uint16_t num_entries;   /* Number of entries                */
+       uint16_t size_of_entry; /* Size of each entry in num bytes  */
+       uint8_t  attributes;    /* enable/disable, persistence      */
+#define FCP_PRIO_ATTR_DISABLE   0x0
+#define FCP_PRIO_ATTR_ENABLE    0x1
+#define FCP_PRIO_ATTR_PERSIST   0x2
+       uint8_t  reserved;      /* Reserved for future use          */
+#define FCP_PRIO_CFG_HDR_SIZE   0x10
+       struct qla_fcp_prio_entry entry[1];     /* fcp priority entries  */
+#define FCP_PRIO_CFG_ENTRY_SIZE 0x20
+};
+
+#define FCP_PRIO_CFG_SIZE       (32*1024) /* fcp prio data per port*/
+
+/* 25XX Support ****************************************************/
+#define FA_FCP_PRIO0_ADDR_25   0x3C000
+#define FA_FCP_PRIO1_ADDR_25   0x3E000
+
 /* 81XX Flash locations -- occupies second 2MB region. */
 #define FA_BOOT_CODE_ADDR_81   0x80000
 #define FA_RISC_CODE_ADDR_81   0xA0000
index c1f1736dcdad6ed76ea33f6db8cabfa35b65dff4..5efd4c05c79b703b3aa046e541a5a7947af50831 100644 (file)
@@ -328,6 +328,9 @@ extern int
 qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
 
 extern int qla2x00_get_data_rate(scsi_qla_host_t *);
+extern int qla24xx_set_fcp_prio(scsi_qla_host_t *, uint16_t, uint16_t,
+       uint16_t *);
+
 /*
  * Global Function Prototypes in qla_isr.c source file.
  */
@@ -384,6 +387,7 @@ extern int qla2xxx_get_flash_info(scsi_qla_host_t *);
 extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t);
 
 extern void qla2xxx_flash_npiv_conf(scsi_qla_host_t *);
+extern int qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *);
 
 /*
  * Global Function Prototypes in qla_dbg.c source file.
@@ -430,7 +434,10 @@ extern void qla2x00_init_host_attr(scsi_qla_host_t *);
 extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
 extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *);
 extern int qla2x00_loopback_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *);
-extern int qla2x00_echo_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *);
+extern int qla2x00_echo_test(scsi_qla_host_t *,
+       struct msg_echo_lb *, uint16_t *);
+extern int qla24xx_update_all_fcp_prio(scsi_qla_host_t *);
+extern int qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *, uint8_t);
 
 /*
  * Global Function Prototypes in qla_dfs.c source file.
index 4229bb483c5e02421d5746c8070a42450392ddec..e7fe11486bb899dbd9e2561063e7ec1bafadbbaf 100644 (file)
@@ -349,6 +349,12 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
                }
        }
 
+       if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) {
+               if (qla24xx_read_fcp_prio_cfg(vha))
+                       qla_printk(KERN_ERR, ha,
+                       "Unable to read FCP priority data.\n");
+       }
+
        return (rval);
 }
 
@@ -4905,3 +4911,165 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha)
        ha->fw_options[2] |= BIT_9;
        qla2x00_set_fw_options(vha, ha->fw_options);
 }
+
+/*
+ * qla24xx_get_fcp_prio
+ *     Gets the fcp cmd priority value for the logged in port.
+ *     Looks for a match of the port descriptors within
+ *     each of the fcp prio config entries. If a match is found,
+ *     the tag (priority) value is returned.
+ *
+ * Input:
+ *     ha = adapter block po
+ *     fcport = port structure pointer.
+ *
+ * Return:
+ *     non-zero (if found)
+ *     0 (if not found)
+ *
+ * Context:
+ *     Kernel context
+ */
+uint8_t
+qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
+{
+       int i, entries;
+       uint8_t pid_match, wwn_match;
+       uint8_t priority;
+       uint32_t pid1, pid2;
+       uint64_t wwn1, wwn2;
+       struct qla_fcp_prio_entry *pri_entry;
+       struct qla_hw_data *ha = vha->hw;
+
+       if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled)
+               return 0;
+
+       priority = 0;
+       entries = ha->fcp_prio_cfg->num_entries;
+       pri_entry = &ha->fcp_prio_cfg->entry[0];
+
+       for (i = 0; i < entries; i++) {
+               pid_match = wwn_match = 0;
+
+               if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) {
+                       pri_entry++;
+                       continue;
+               }
+
+               /* check source pid for a match */
+               if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) {
+                       pid1 = pri_entry->src_pid & INVALID_PORT_ID;
+                       pid2 = vha->d_id.b24 & INVALID_PORT_ID;
+                       if (pid1 == INVALID_PORT_ID)
+                               pid_match++;
+                       else if (pid1 == pid2)
+                               pid_match++;
+               }
+
+               /* check destination pid for a match */
+               if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) {
+                       pid1 = pri_entry->dst_pid & INVALID_PORT_ID;
+                       pid2 = fcport->d_id.b24 & INVALID_PORT_ID;
+                       if (pid1 == INVALID_PORT_ID)
+                               pid_match++;
+                       else if (pid1 == pid2)
+                               pid_match++;
+               }
+
+               /* check source WWN for a match */
+               if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) {
+                       wwn1 = wwn_to_u64(vha->port_name);
+                       wwn2 = wwn_to_u64(pri_entry->src_wwpn);
+                       if (wwn2 == (uint64_t)-1)
+                               wwn_match++;
+                       else if (wwn1 == wwn2)
+                               wwn_match++;
+               }
+
+               /* check destination WWN for a match */
+               if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) {
+                       wwn1 = wwn_to_u64(fcport->port_name);
+                       wwn2 = wwn_to_u64(pri_entry->dst_wwpn);
+                       if (wwn2 == (uint64_t)-1)
+                               wwn_match++;
+                       else if (wwn1 == wwn2)
+                               wwn_match++;
+               }
+
+               if (pid_match == 2 || wwn_match == 2) {
+                       /* Found a matching entry */
+                       if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID)
+                               priority = pri_entry->tag;
+                       break;
+               }
+
+               pri_entry++;
+       }
+
+       return priority;
+}
+
+/*
+ * qla24xx_update_fcport_fcp_prio
+ *     Activates fcp priority for the logged in fc port
+ *
+ * Input:
+ *     ha = adapter block pointer.
+ *     fcp = port structure pointer.
+ *
+ * Return:
+ *     QLA_SUCCESS or QLA_FUNCTION_FAILED
+ *
+ * Context:
+ *     Kernel context.
+ */
+int
+qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *ha, fc_port_t *fcport)
+{
+       int ret;
+       uint8_t priority;
+       uint16_t mb[5];
+
+       if (atomic_read(&fcport->state) == FCS_UNCONFIGURED ||
+               fcport->port_type != FCT_TARGET ||
+               fcport->loop_id == FC_NO_LOOP_ID)
+               return QLA_FUNCTION_FAILED;
+
+       priority = qla24xx_get_fcp_prio(ha, fcport);
+       ret = qla24xx_set_fcp_prio(ha, fcport->loop_id, priority, mb);
+       if (ret == QLA_SUCCESS)
+               fcport->fcp_prio = priority;
+       else
+               DEBUG2(printk(KERN_WARNING
+                       "scsi(%ld): Unable to activate fcp priority, "
+                       " ret=0x%x\n", ha->host_no, ret));
+
+       return  ret;
+}
+
+/*
+ * qla24xx_update_all_fcp_prio
+ *     Activates fcp priority for all the logged in ports
+ *
+ * Input:
+ *     ha = adapter block pointer.
+ *
+ * Return:
+ *     QLA_SUCCESS or QLA_FUNCTION_FAILED
+ *
+ * Context:
+ *     Kernel context.
+ */
+int
+qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha)
+{
+       int ret;
+       fc_port_t *fcport;
+
+       ret = QLA_FUNCTION_FAILED;
+       /* We need to set priority for all logged in ports */
+       list_for_each_entry(fcport, &vha->vp_fcports, list)
+               ret = qla24xx_update_fcport_fcp_prio(vha, fcport);
+
+       return ret;
+}
index 7f3bc45d2e202ebdc95b93c58f4b8c94361ff805..e9c9f82c1d8763f920ad8cddadef81722f01bafa 100644 (file)
@@ -3896,3 +3896,50 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha)
 
        return rval;
 }
+
+int
+qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
+               uint16_t *mb)
+{
+       int rval;
+       mbx_cmd_t mc;
+       mbx_cmd_t *mcp = &mc;
+       struct qla_hw_data *ha = vha->hw;
+
+       if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha))
+               return QLA_FUNCTION_FAILED;
+
+       DEBUG11(printk(KERN_INFO
+           "%s(%ld): entered.\n", __func__, ha->host_no));
+
+       mcp->mb[0] = MBC_PORT_PARAMS;
+       mcp->mb[1] = loop_id;
+       if (ha->flags.fcp_prio_enabled)
+               mcp->mb[2] = BIT_1;
+       else
+               mcp->mb[2] = BIT_2;
+       mcp->mb[4] = priority & 0xf;
+       mcp->mb[9] = vha->vp_idx;
+       mcp->out_mb = MBX_9|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+       mcp->in_mb = MBX_4|MBX_3|MBX_1|MBX_0;
+       mcp->tov = 30;
+       mcp->flags = 0;
+       rval = qla2x00_mailbox_command(vha, mcp);
+       if (mb != NULL) {
+               mb[0] = mcp->mb[0];
+               mb[1] = mcp->mb[1];
+               mb[3] = mcp->mb[3];
+               mb[4] = mcp->mb[4];
+       }
+
+       if (rval != QLA_SUCCESS) {
+               DEBUG2_3_11(printk(KERN_WARNING
+                   "%s(%ld): failed=%x.\n", __func__,
+                   vha->host_no, rval));
+       } else {
+               DEBUG11(printk(KERN_INFO
+                   "%s(%ld): done.\n", __func__, vha->host_no));
+       }
+
+       return rval;
+}
index 8b3de4e54c28bfb5ebdd6b5901e62e37101fe36f..f32a4b032967ed64bc58dfeba21272709f55e1ef 100644 (file)
@@ -648,6 +648,12 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
        const uint32_t def_npiv_conf1[] =
                { FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
                        FA_NPIV_CONF1_ADDR_81 };
+       const uint32_t fcp_prio_cfg0[] =
+               { FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25,
+                       0 };
+       const uint32_t fcp_prio_cfg1[] =
+               { FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25,
+                       0 };
        uint32_t def;
        uint16_t *wptr;
        uint16_t cnt, chksum;
@@ -732,6 +738,14 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
                case FLT_REG_GOLD_FW:
                        ha->flt_region_gold_fw = start;
                        break;
+               case FLT_REG_FCP_PRIO_0:
+                       if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+                               ha->flt_region_fcp_prio = start;
+                       break;
+               case FLT_REG_FCP_PRIO_1:
+                       if (PCI_FUNC(ha->pdev->devfn) & 1)
+                               ha->flt_region_fcp_prio = start;
+                       break;
                }
        }
        goto done;
@@ -750,12 +764,14 @@ no_flash_data:
        ha->flt_region_boot = def_boot[def];
        ha->flt_region_vpd_nvram = def_vpd_nvram[def];
        ha->flt_region_vpd = ha->flags.port0 ?
-           def_vpd0[def]: def_vpd1[def];
+           def_vpd0[def] : def_vpd1[def];
        ha->flt_region_nvram = ha->flags.port0 ?
-           def_nvram0[def]: def_nvram1[def];
+           def_nvram0[def] : def_nvram1[def];
        ha->flt_region_fdt = def_fdt[def];
        ha->flt_region_npiv_conf = ha->flags.port0 ?
-           def_npiv_conf0[def]: def_npiv_conf1[def];
+           def_npiv_conf0[def] : def_npiv_conf1[def];
+       ha->flt_region_fcp_prio = ha->flags.port0 ?
+           fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
 done:
        DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
            "vpd_nvram=0x%x vpd=0x%x nvram=0x%x fdt=0x%x flt=0x%x "
@@ -2722,3 +2738,50 @@ qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size)
 
        return 0;
 }
+
+int
+qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha)
+{
+       int len, max_len;
+       uint32_t fcp_prio_addr;
+       struct qla_hw_data *ha = vha->hw;
+
+       if (!ha->fcp_prio_cfg) {
+               ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
+               if (!ha->fcp_prio_cfg) {
+                       qla_printk(KERN_WARNING, ha,
+                       "Unable to allocate memory for fcp priority data "
+                                       "(%x).\n", FCP_PRIO_CFG_SIZE);
+                       return QLA_FUNCTION_FAILED;
+               }
+       }
+       memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
+
+       fcp_prio_addr = ha->flt_region_fcp_prio;
+
+       /* first read the fcp priority data header from flash */
+       ha->isp_ops->read_optrom(vha, (uint8_t *)ha->fcp_prio_cfg,
+                       fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
+
+       if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 0))
+               goto fail;
+
+       /* read remaining FCP CMD config data from flash */
+       fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2);
+       len = ha->fcp_prio_cfg->num_entries * FCP_PRIO_CFG_ENTRY_SIZE;
+       max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE;
+
+       ha->isp_ops->read_optrom(vha, (uint8_t *)&ha->fcp_prio_cfg->entry[0],
+                       fcp_prio_addr << 2, (len < max_len ? len : max_len));
+
+       /* revalidate the entire FCP priority config data, including entries */
+       if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 1))
+               goto fail;
+
+       ha->flags.fcp_prio_enabled = 1;
+       return QLA_SUCCESS;
+fail:
+       vfree(ha->fcp_prio_cfg);
+       ha->fcp_prio_cfg = NULL;
+       return QLA_FUNCTION_FAILED;
+}