obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_BOOKE) += dcr.o
obj-$(CONFIG_40x) += dcr.o
+obj-$(CONFIG_U3_DART) += u3_iommu.o
--- /dev/null
+/*
+ * arch/ppc64/kernel/u3_iommu.c
+ *
+ * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ *
+ * Based on pSeries_iommu.c:
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ *
+ * Dynamic DMA mapping support, Apple U3 & IBM CPC925 "DART" iommu.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/ppcdebug.h>
+#include <asm/iommu.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/abs_addr.h>
+#include <asm/cacheflush.h>
+#include <asm/lmb.h>
+#include <asm/dart.h>
+#include <asm/ppc-pci.h>
+
+extern int iommu_force_on;
+
+/* Physical base address and size of the DART table */
+unsigned long dart_tablebase; /* exported to htab_initialize */
+static unsigned long dart_tablesize;
+
+/* Virtual base address of the DART table */
+static u32 *dart_vbase;
+
+/* Mapped base address for the dart */
+static unsigned int *dart;
+
+/* Dummy val that entries are set to when unused */
+static unsigned int dart_emptyval;
+
+static struct iommu_table iommu_table_u3;
+static int iommu_table_u3_inited;
+static int dart_dirty;
+
+#define DBG(...)
+
+static inline void dart_tlb_invalidate_all(void)
+{
+ unsigned long l = 0;
+ unsigned int reg;
+ unsigned long limit;
+
+ DBG("dart: flush\n");
+
+ /* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
+ * control register and wait for it to clear.
+ *
+ * Gotcha: Sometimes, the DART won't detect that the bit gets
+ * set. If so, clear it and set it again.
+ */
+
+ limit = 0;
+
+retry:
+ reg = in_be32((unsigned int *)dart+DARTCNTL);
+ reg |= DARTCNTL_FLUSHTLB;
+ out_be32((unsigned int *)dart+DARTCNTL, reg);
+
+ l = 0;
+ while ((in_be32((unsigned int *)dart+DARTCNTL) & DARTCNTL_FLUSHTLB) &&
+ l < (1L<<limit)) {
+ l++;
+ }
+ if (l == (1L<<limit)) {
+ if (limit < 4) {
+ limit++;
+ reg = in_be32((unsigned int *)dart+DARTCNTL);
+ reg &= ~DARTCNTL_FLUSHTLB;
+ out_be32((unsigned int *)dart+DARTCNTL, reg);
+ goto retry;
+ } else
+ panic("U3-DART: TLB did not flush after waiting a long "
+ "time. Buggy U3 ?");
+ }
+}
+
+static void dart_flush(struct iommu_table *tbl)
+{
+ if (dart_dirty)
+ dart_tlb_invalidate_all();
+ dart_dirty = 0;
+}
+
+static void dart_build(struct iommu_table *tbl, long index,
+ long npages, unsigned long uaddr,
+ enum dma_data_direction direction)
+{
+ unsigned int *dp;
+ unsigned int rpn;
+
+ DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
+
+ index <<= DART_PAGE_FACTOR;
+ npages <<= DART_PAGE_FACTOR;
+
+ dp = ((unsigned int*)tbl->it_base) + index;
+
+ /* On U3, all memory is contigous, so we can move this
+ * out of the loop.
+ */
+ while (npages--) {
+ rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
+
+ *(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
+
+ rpn++;
+ uaddr += DART_PAGE_SIZE;
+ }
+
+ dart_dirty = 1;
+}
+
+
+static void dart_free(struct iommu_table *tbl, long index, long npages)
+{
+ unsigned int *dp;
+
+ /* We don't worry about flushing the TLB cache. The only drawback of
+ * not doing it is that we won't catch buggy device drivers doing
+ * bad DMAs, but then no 32-bit architecture ever does either.
+ */
+
+ DBG("dart: free at: %lx, %lx\n", index, npages);
+
+ index <<= DART_PAGE_FACTOR;
+ npages <<= DART_PAGE_FACTOR;
+
+ dp = ((unsigned int *)tbl->it_base) + index;
+
+ while (npages--)
+ *(dp++) = dart_emptyval;
+}
+
+
+static int dart_init(struct device_node *dart_node)
+{
+ unsigned int regword;
+ unsigned int i;
+ unsigned long tmp;
+
+ if (dart_tablebase == 0 || dart_tablesize == 0) {
+ printk(KERN_INFO "U3-DART: table not allocated, using direct DMA\n");
+ return -ENODEV;
+ }
+
+ /* Make sure nothing from the DART range remains in the CPU cache
+ * from a previous mapping that existed before the kernel took
+ * over
+ */
+ flush_dcache_phys_range(dart_tablebase, dart_tablebase + dart_tablesize);
+
+ /* Allocate a spare page to map all invalid DART pages. We need to do
+ * that to work around what looks like a problem with the HT bridge
+ * prefetching into invalid pages and corrupting data
+ */
+ tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
+ if (!tmp)
+ panic("U3-DART: Cannot allocate spare page!");
+ dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & DARTMAP_RPNMASK);
+
+ /* Map in DART registers. FIXME: Use device node to get base address */
+ dart = ioremap(DART_BASE, 0x7000);
+ if (dart == NULL)
+ panic("U3-DART: Cannot map registers!");
+
+ /* Set initial control register contents: table base,
+ * table size and enable bit
+ */
+ regword = DARTCNTL_ENABLE |
+ ((dart_tablebase >> DART_PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) |
+ (((dart_tablesize >> DART_PAGE_SHIFT) & DARTCNTL_SIZE_MASK)
+ << DARTCNTL_SIZE_SHIFT);
+ dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
+
+ /* Fill initial table */
+ for (i = 0; i < dart_tablesize/4; i++)
+ dart_vbase[i] = dart_emptyval;
+
+ /* Initialize DART with table base and enable it. */
+ out_be32((unsigned int *)dart, regword);
+
+ /* Invalidate DART to get rid of possible stale TLBs */
+ dart_tlb_invalidate_all();
+
+ printk(KERN_INFO "U3/CPC925 DART IOMMU initialized\n");
+
+ return 0;
+}
+
+static void iommu_table_u3_setup(void)
+{
+ iommu_table_u3.it_busno = 0;
+ iommu_table_u3.it_offset = 0;
+ /* it_size is in number of entries */
+ iommu_table_u3.it_size = dart_tablesize / sizeof(u32);
+
+ /* Initialize the common IOMMU code */
+ iommu_table_u3.it_base = (unsigned long)dart_vbase;
+ iommu_table_u3.it_index = 0;
+ iommu_table_u3.it_blocksize = 1;
+ iommu_init_table(&iommu_table_u3);
+
+ /* Reserve the last page of the DART to avoid possible prefetch
+ * past the DART mapped area
+ */
+ set_bit(iommu_table_u3.it_size - 1, iommu_table_u3.it_map);
+}
+
+static void iommu_dev_setup_u3(struct pci_dev *dev)
+{
+ struct device_node *dn;
+
+ /* We only have one iommu table on the mac for now, which makes
+ * things simple. Setup all PCI devices to point to this table
+ *
+ * We must use pci_device_to_OF_node() to make sure that
+ * we get the real "final" pointer to the device in the
+ * pci_dev sysdata and not the temporary PHB one
+ */
+ dn = pci_device_to_OF_node(dev);
+
+ if (dn)
+ PCI_DN(dn)->iommu_table = &iommu_table_u3;
+}
+
+static void iommu_bus_setup_u3(struct pci_bus *bus)
+{
+ struct device_node *dn;
+
+ if (!iommu_table_u3_inited) {
+ iommu_table_u3_inited = 1;
+ iommu_table_u3_setup();
+ }
+
+ dn = pci_bus_to_OF_node(bus);
+
+ if (dn)
+ PCI_DN(dn)->iommu_table = &iommu_table_u3;
+}
+
+static void iommu_dev_setup_null(struct pci_dev *dev) { }
+static void iommu_bus_setup_null(struct pci_bus *bus) { }
+
+void iommu_init_early_u3(void)
+{
+ struct device_node *dn;
+
+ /* Find the DART in the device-tree */
+ dn = of_find_compatible_node(NULL, "dart", "u3-dart");
+ if (dn == NULL)
+ return;
+
+ /* Setup low level TCE operations for the core IOMMU code */
+ ppc_md.tce_build = dart_build;
+ ppc_md.tce_free = dart_free;
+ ppc_md.tce_flush = dart_flush;
+
+ /* Initialize the DART HW */
+ if (dart_init(dn)) {
+ /* If init failed, use direct iommu and null setup functions */
+ ppc_md.iommu_dev_setup = iommu_dev_setup_null;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_null;
+
+ /* Setup pci_dma ops */
+ pci_direct_iommu_init();
+ } else {
+ ppc_md.iommu_dev_setup = iommu_dev_setup_u3;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_u3;
+
+ /* Setup pci_dma ops */
+ pci_iommu_init();
+ }
+}
+
+
+void __init alloc_u3_dart_table(void)
+{
+ /* Only reserve DART space if machine has more than 2GB of RAM
+ * or if requested with iommu=on on cmdline.
+ */
+ if (lmb_end_of_DRAM() <= 0x80000000ull && !iommu_force_on)
+ return;
+
+ /* 512 pages (2MB) is max DART tablesize. */
+ dart_tablesize = 1UL << 21;
+ /* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
+ * will blow up an entire large page anyway in the kernel mapping
+ */
+ dart_tablebase = (unsigned long)
+ abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
+
+ printk(KERN_INFO "U3-DART allocated at: %lx\n", dart_tablebase);
+}
obj-$(CONFIG_PPC_MAPLE) += maple_setup.o maple_pci.o maple_time.o \
udbg_16550.o
-obj-$(CONFIG_U3_DART) += u3_iommu.o
-
ifdef CONFIG_SMP
obj-$(CONFIG_PPC_PMAC) += smp-tbsync.o
obj-$(CONFIG_PPC_MAPLE) += smp-tbsync.o
+++ /dev/null
-/*
- * arch/ppc64/kernel/u3_iommu.c
- *
- * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
- *
- * Based on pSeries_iommu.c:
- * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
- * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
- *
- * Dynamic DMA mapping support, Apple U3 & IBM CPC925 "DART" iommu.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/vmalloc.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/ppcdebug.h>
-#include <asm/iommu.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/abs_addr.h>
-#include <asm/cacheflush.h>
-#include <asm/lmb.h>
-#include <asm/dart.h>
-#include <asm/ppc-pci.h>
-
-extern int iommu_force_on;
-
-/* Physical base address and size of the DART table */
-unsigned long dart_tablebase; /* exported to htab_initialize */
-static unsigned long dart_tablesize;
-
-/* Virtual base address of the DART table */
-static u32 *dart_vbase;
-
-/* Mapped base address for the dart */
-static unsigned int *dart;
-
-/* Dummy val that entries are set to when unused */
-static unsigned int dart_emptyval;
-
-static struct iommu_table iommu_table_u3;
-static int iommu_table_u3_inited;
-static int dart_dirty;
-
-#define DBG(...)
-
-static inline void dart_tlb_invalidate_all(void)
-{
- unsigned long l = 0;
- unsigned int reg;
- unsigned long limit;
-
- DBG("dart: flush\n");
-
- /* To invalidate the DART, set the DARTCNTL_FLUSHTLB bit in the
- * control register and wait for it to clear.
- *
- * Gotcha: Sometimes, the DART won't detect that the bit gets
- * set. If so, clear it and set it again.
- */
-
- limit = 0;
-
-retry:
- reg = in_be32((unsigned int *)dart+DARTCNTL);
- reg |= DARTCNTL_FLUSHTLB;
- out_be32((unsigned int *)dart+DARTCNTL, reg);
-
- l = 0;
- while ((in_be32((unsigned int *)dart+DARTCNTL) & DARTCNTL_FLUSHTLB) &&
- l < (1L<<limit)) {
- l++;
- }
- if (l == (1L<<limit)) {
- if (limit < 4) {
- limit++;
- reg = in_be32((unsigned int *)dart+DARTCNTL);
- reg &= ~DARTCNTL_FLUSHTLB;
- out_be32((unsigned int *)dart+DARTCNTL, reg);
- goto retry;
- } else
- panic("U3-DART: TLB did not flush after waiting a long "
- "time. Buggy U3 ?");
- }
-}
-
-static void dart_flush(struct iommu_table *tbl)
-{
- if (dart_dirty)
- dart_tlb_invalidate_all();
- dart_dirty = 0;
-}
-
-static void dart_build(struct iommu_table *tbl, long index,
- long npages, unsigned long uaddr,
- enum dma_data_direction direction)
-{
- unsigned int *dp;
- unsigned int rpn;
-
- DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr);
-
- index <<= DART_PAGE_FACTOR;
- npages <<= DART_PAGE_FACTOR;
-
- dp = ((unsigned int*)tbl->it_base) + index;
-
- /* On U3, all memory is contigous, so we can move this
- * out of the loop.
- */
- while (npages--) {
- rpn = virt_to_abs(uaddr) >> DART_PAGE_SHIFT;
-
- *(dp++) = DARTMAP_VALID | (rpn & DARTMAP_RPNMASK);
-
- rpn++;
- uaddr += DART_PAGE_SIZE;
- }
-
- dart_dirty = 1;
-}
-
-
-static void dart_free(struct iommu_table *tbl, long index, long npages)
-{
- unsigned int *dp;
-
- /* We don't worry about flushing the TLB cache. The only drawback of
- * not doing it is that we won't catch buggy device drivers doing
- * bad DMAs, but then no 32-bit architecture ever does either.
- */
-
- DBG("dart: free at: %lx, %lx\n", index, npages);
-
- index <<= DART_PAGE_FACTOR;
- npages <<= DART_PAGE_FACTOR;
-
- dp = ((unsigned int *)tbl->it_base) + index;
-
- while (npages--)
- *(dp++) = dart_emptyval;
-}
-
-
-static int dart_init(struct device_node *dart_node)
-{
- unsigned int regword;
- unsigned int i;
- unsigned long tmp;
-
- if (dart_tablebase == 0 || dart_tablesize == 0) {
- printk(KERN_INFO "U3-DART: table not allocated, using direct DMA\n");
- return -ENODEV;
- }
-
- /* Make sure nothing from the DART range remains in the CPU cache
- * from a previous mapping that existed before the kernel took
- * over
- */
- flush_dcache_phys_range(dart_tablebase, dart_tablebase + dart_tablesize);
-
- /* Allocate a spare page to map all invalid DART pages. We need to do
- * that to work around what looks like a problem with the HT bridge
- * prefetching into invalid pages and corrupting data
- */
- tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
- if (!tmp)
- panic("U3-DART: Cannot allocate spare page!");
- dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & DARTMAP_RPNMASK);
-
- /* Map in DART registers. FIXME: Use device node to get base address */
- dart = ioremap(DART_BASE, 0x7000);
- if (dart == NULL)
- panic("U3-DART: Cannot map registers!");
-
- /* Set initial control register contents: table base,
- * table size and enable bit
- */
- regword = DARTCNTL_ENABLE |
- ((dart_tablebase >> DART_PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) |
- (((dart_tablesize >> DART_PAGE_SHIFT) & DARTCNTL_SIZE_MASK)
- << DARTCNTL_SIZE_SHIFT);
- dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
-
- /* Fill initial table */
- for (i = 0; i < dart_tablesize/4; i++)
- dart_vbase[i] = dart_emptyval;
-
- /* Initialize DART with table base and enable it. */
- out_be32((unsigned int *)dart, regword);
-
- /* Invalidate DART to get rid of possible stale TLBs */
- dart_tlb_invalidate_all();
-
- printk(KERN_INFO "U3/CPC925 DART IOMMU initialized\n");
-
- return 0;
-}
-
-static void iommu_table_u3_setup(void)
-{
- iommu_table_u3.it_busno = 0;
- iommu_table_u3.it_offset = 0;
- /* it_size is in number of entries */
- iommu_table_u3.it_size = dart_tablesize / sizeof(u32);
-
- /* Initialize the common IOMMU code */
- iommu_table_u3.it_base = (unsigned long)dart_vbase;
- iommu_table_u3.it_index = 0;
- iommu_table_u3.it_blocksize = 1;
- iommu_init_table(&iommu_table_u3);
-
- /* Reserve the last page of the DART to avoid possible prefetch
- * past the DART mapped area
- */
- set_bit(iommu_table_u3.it_size - 1, iommu_table_u3.it_map);
-}
-
-static void iommu_dev_setup_u3(struct pci_dev *dev)
-{
- struct device_node *dn;
-
- /* We only have one iommu table on the mac for now, which makes
- * things simple. Setup all PCI devices to point to this table
- *
- * We must use pci_device_to_OF_node() to make sure that
- * we get the real "final" pointer to the device in the
- * pci_dev sysdata and not the temporary PHB one
- */
- dn = pci_device_to_OF_node(dev);
-
- if (dn)
- PCI_DN(dn)->iommu_table = &iommu_table_u3;
-}
-
-static void iommu_bus_setup_u3(struct pci_bus *bus)
-{
- struct device_node *dn;
-
- if (!iommu_table_u3_inited) {
- iommu_table_u3_inited = 1;
- iommu_table_u3_setup();
- }
-
- dn = pci_bus_to_OF_node(bus);
-
- if (dn)
- PCI_DN(dn)->iommu_table = &iommu_table_u3;
-}
-
-static void iommu_dev_setup_null(struct pci_dev *dev) { }
-static void iommu_bus_setup_null(struct pci_bus *bus) { }
-
-void iommu_init_early_u3(void)
-{
- struct device_node *dn;
-
- /* Find the DART in the device-tree */
- dn = of_find_compatible_node(NULL, "dart", "u3-dart");
- if (dn == NULL)
- return;
-
- /* Setup low level TCE operations for the core IOMMU code */
- ppc_md.tce_build = dart_build;
- ppc_md.tce_free = dart_free;
- ppc_md.tce_flush = dart_flush;
-
- /* Initialize the DART HW */
- if (dart_init(dn)) {
- /* If init failed, use direct iommu and null setup functions */
- ppc_md.iommu_dev_setup = iommu_dev_setup_null;
- ppc_md.iommu_bus_setup = iommu_bus_setup_null;
-
- /* Setup pci_dma ops */
- pci_direct_iommu_init();
- } else {
- ppc_md.iommu_dev_setup = iommu_dev_setup_u3;
- ppc_md.iommu_bus_setup = iommu_bus_setup_u3;
-
- /* Setup pci_dma ops */
- pci_iommu_init();
- }
-}
-
-
-void __init alloc_u3_dart_table(void)
-{
- /* Only reserve DART space if machine has more than 2GB of RAM
- * or if requested with iommu=on on cmdline.
- */
- if (lmb_end_of_DRAM() <= 0x80000000ull && !iommu_force_on)
- return;
-
- /* 512 pages (2MB) is max DART tablesize. */
- dart_tablesize = 1UL << 21;
- /* 16MB (1 << 24) alignment. We allocate a full 16Mb chuck since we
- * will blow up an entire large page anyway in the kernel mapping
- */
- dart_tablebase = (unsigned long)
- abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
-
- printk(KERN_INFO "U3-DART allocated at: %lx\n", dart_tablebase);
-}
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff