}
/**
- * i915_driver_load - setup chip and create an initial config
- * @dev: DRM device
- * @flags: startup flags
+ * i915_driver_init_hw - setup state requiring device access
+ * @dev_priv: device private
*
- * The driver load routine has to do several things:
- * - drive output discovery via intel_modeset_init()
- * - initialize the memory manager
- * - allocate initial config memory
- * - setup the DRM framebuffer with the allocated memory
+ * Setup state that requires accessing the device, but doesn't require
+ * exposing the driver via kernel internal or userspace interfaces.
*/
-int i915_driver_load(struct drm_device *dev, unsigned long flags)
+static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
{
- struct drm_i915_private *dev_priv;
- int ret = 0;
+ struct drm_device *dev = dev_priv->dev;
uint32_t aperture_size;
-
- dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
- if (dev_priv == NULL)
- return -ENOMEM;
-
- dev->dev_private = dev_priv;
-
- ret = i915_driver_init_early(dev_priv, dev,
- (struct intel_device_info *)flags);
-
- if (ret < 0)
- goto out_free_priv;
-
- intel_runtime_pm_get(dev_priv);
-
- ret = i915_driver_init_mmio(dev_priv);
- if (ret < 0)
- goto out_runtime_pm_put;
+ int ret;
intel_device_info_runtime_init(dev);
ret = i915_gem_gtt_init(dev);
if (ret)
- goto out_cleanup_mmio;
+ return ret;
/* WARNING: Apparently we must kick fbdev drivers before vgacon,
* otherwise the vga fbdev driver falls over. */
DRM_DEBUG_DRIVER("can't enable MSI");
}
+ return 0;
+
+out_gtt:
+ i915_global_gtt_cleanup(dev);
+
+ return ret;
+}
+
+/**
+ * i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ if (dev->pdev->msi_enabled)
+ pci_disable_msi(dev->pdev);
+
+ pm_qos_remove_request(&dev_priv->pm_qos);
+ arch_phys_wc_del(dev_priv->gtt.mtrr);
+ io_mapping_free(dev_priv->gtt.mappable);
+ i915_global_gtt_cleanup(dev);
+}
+
+/**
+ * i915_driver_load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ * - drive output discovery via intel_modeset_init()
+ * - initialize the memory manager
+ * - allocate initial config memory
+ * - setup the DRM framebuffer with the allocated memory
+ */
+int i915_driver_load(struct drm_device *dev, unsigned long flags)
+{
+ struct drm_i915_private *dev_priv;
+ int ret = 0;
+
+ dev_priv = kzalloc(sizeof(*dev_priv), GFP_KERNEL);
+ if (dev_priv == NULL)
+ return -ENOMEM;
+
+ dev->dev_private = dev_priv;
+
+ ret = i915_driver_init_early(dev_priv, dev,
+ (struct intel_device_info *)flags);
+
+ if (ret < 0)
+ goto out_free_priv;
+
+ intel_runtime_pm_get(dev_priv);
+
+ ret = i915_driver_init_mmio(dev_priv);
+ if (ret < 0)
+ goto out_runtime_pm_put;
+
+ ret = i915_driver_init_hw(dev_priv);
+ if (ret < 0)
+ goto out_cleanup_mmio;
+
if (INTEL_INFO(dev)->num_pipes) {
ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes);
if (ret)
- goto out_disable_msi;
+ goto out_cleanup_hw;
}
ret = i915_load_modeset_init(dev);
out_power_well:
intel_power_domains_fini(dev_priv);
drm_vblank_cleanup(dev);
-out_disable_msi:
- if (dev->pdev->msi_enabled)
- pci_disable_msi(dev->pdev);
-
- pm_qos_remove_request(&dev_priv->pm_qos);
- arch_phys_wc_del(dev_priv->gtt.mtrr);
- io_mapping_free(dev_priv->gtt.mappable);
-out_gtt:
- i915_global_gtt_cleanup(dev);
+out_cleanup_hw:
+ i915_driver_cleanup_hw(dev_priv);
out_cleanup_mmio:
i915_driver_cleanup_mmio(dev_priv);
out_runtime_pm_put:
intel_power_domains_fini(dev_priv);
- if (dev->pdev->msi_enabled)
- pci_disable_msi(dev->pdev);
- pm_qos_remove_request(&dev_priv->pm_qos);
- arch_phys_wc_del(dev_priv->gtt.mtrr);
- io_mapping_free(dev_priv->gtt.mappable);
- i915_global_gtt_cleanup(dev);
-
+ i915_driver_cleanup_hw(dev_priv);
i915_driver_cleanup_mmio(dev_priv);
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);