ARM: shmobile: koelsch: add Ether DT support

Define the Koelsch board dependent part of the Ether device node.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index bf6ba0c7faa05bdb8f4f449df540df83f24f3818..603af8caae5bf66c1b5a426d4ba89c00f17bbc81 100644 (file)
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -2,7 +2,8 @@
  * Device Tree Source for the Koelsch board
  *
  * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -146,12 +147,37 @@
                renesas,function = "scif1";
        };
 
+       ether_pins: ether {
+               renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+               renesas,function = "eth";
+       };
+
+       phy1_pins: phy1 {
+               renesas,groups = "intc_irq0";
+               renesas,function = "intc";
+       };
+
        qspi_pins: spi {
                renesas,groups = "qspi_ctrl", "qspi_data4";
                renesas,function = "qspi";
        };
 };
 
+&ether {
+       pinctrl-0 = <&ether_pins &phy1_pins>;
+       pinctrl-names = "default";
+
+       phy-handle = <&phy1>;
+       renesas,ether-link-active-low;
+       status = "ok";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+               interrupt-parent = <&irqc0>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
 &sata0 {
        status = "okay";
 };