ucc_geth: Fix netdev watchdog triggering on link changes
authorAnton Vorontsov <avorontsov@ru.mvista.com>
Thu, 24 Dec 2009 05:31:05 +0000 (05:31 +0000)
committerDavid S. Miller <davem@davemloft.net>
Sun, 27 Dec 2009 04:24:43 +0000 (20:24 -0800)
Since commit 864fdf884e82bacbe8ca5e93bd43393a61d2e2b4 ("ucc_geth:
Fix hangs after switching from full to half duplex") ucc_geth driver
disables the controller during MAC configuration changes. Though,
disabling the controller might take quite awhile, and so the netdev
watchdog might get upset:

 NETDEV WATCHDOG: eth2 (ucc_geth): transmit queue 0 timed out
 ------------[ cut here ]------------
 Badness at c02729a8 [verbose debug info unavailable]
 NIP: c02729a8 LR: c02729a8 CTR: c01b6088
 REGS: c0451c40 TRAP: 0700   Not tainted  (2.6.32-trunk-8360e)
 [...]
 NIP [c02729a8] dev_watchdog+0x280/0x290
 LR [c02729a8] dev_watchdog+0x280/0x290
 Call Trace:
 [c0451cf0] [c02729a8] dev_watchdog+0x280/0x290 (unreliable)
 [c0451d50] [c00377c4] run_timer_softirq+0x164/0x224
 [c0451da0] [c0032a38] __do_softirq+0xb8/0x13c
 [c0451df0] [c00065cc] do_softirq+0xa0/0xac
 [c0451e00] [c003280c] irq_exit+0x7c/0x9c
 [c0451e10] [c00640c4] __ipipe_sync_stage+0x248/0x24c
 [...]

This patch fixes the issue by detaching the netdev during the
time we change the configuration.

Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Cc: Stable <stable@vger.kernel.org> [2.6.32]
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ucc_geth.c

index 0f8c99e845dd3cc98cf9005a59d5cfd4ac6ab729..7fff4c5a16934d61cfda4db6767bf1cb2b9945bc 100644 (file)
@@ -1563,7 +1563,10 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
 
 static void ugeth_quiesce(struct ucc_geth_private *ugeth)
 {
-       /* Wait for and prevent any further xmits. */
+       /* Prevent any further xmits, plus detach the device. */
+       netif_device_detach(ugeth->ndev);
+
+       /* Wait for any current xmits to finish. */
        netif_tx_disable(ugeth->ndev);
 
        /* Disable the interrupt to avoid NAPI rescheduling. */
@@ -1577,7 +1580,7 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
 {
        napi_enable(&ugeth->napi);
        enable_irq(ugeth->ug_info->uf_info.irq);
-       netif_tx_wake_all_queues(ugeth->ndev);
+       netif_device_attach(ugeth->ndev);
 }
 
 /* Called every time the controller might need to be made