cfi->addr_unlock1 = 0x555;
cfi->addr_unlock2 = 0x2AA;
+
+ cfi->sector_erase_cmd = CMD(0x50);
}
static void fixup_sst38vf640x_sectorsize(struct mtd_info *mtd, void *param)
* there was an error (so leave the erase
* routine to recover from it) or we trying to
* use the erase-in-progress sector. */
- map_write(map, CMD(0x30), chip->in_progress_block_addr);
+ map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr);
chip->state = FL_ERASING;
chip->oldstate = FL_READY;
printk(KERN_ERR "MTD %s(): chip not ready after erase suspend\n", __func__);
switch(chip->oldstate) {
case FL_ERASING:
chip->state = chip->oldstate;
- map_write(map, CMD(0x30), chip->in_progress_block_addr);
+ map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr);
chip->oldstate = FL_READY;
chip->state = FL_ERASING;
break;
local_irq_disable();
/* Resume the write or erase operation */
- map_write(map, CMD(0x30), adr);
+ map_write(map, cfi->sector_erase_cmd, adr);
chip->state = oldstate;
start = xip_currtime();
} else if (usec >= 1000000/HZ) {
cfi_send_gen_cmd(0x80, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- map_write(map, CMD(0x30), adr);
+ map_write(map, cfi->sector_erase_cmd, adr);
chip->state = FL_ERASING;
chip->erase_suspended = 0;