PIT_TICK_RATE is currently defined in four architectures, but in three
different places. While linux/timex.h is not the perfect place for it, it
is still a reasonable replacement for those drivers that traditionally use
asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency.
Note that for Alpha, the actual value changed from 1193182UL to 1193180UL.
This is unlikely to make a difference, and probably can only improve
accuracy. There was a discussion on the correct value of CLOCK_TICK_RATE
a few years ago, after which every existing instance was getting changed
to
1193182. According to the specification, it should be
1193181.818181...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/*
* 8253/8254 Programmable Interval Timer
*/
-
-#ifndef _8253PIT_H
-#define _8253PIT_H
-
-#define PIT_TICK_RATE 1193180UL
-
-#endif
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/ioport.h>
+#include <linux/timex.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#define PIT_CH0 0x40
#define PIT_CH2 0x42
-#define PIT_TICK_RATE 1193182UL
-
extern spinlock_t i8253_lock;
extern void setup_pit_timer(void);
-#ifndef _ASM_POWERPC_8253PIT_H
-#define _ASM_POWERPC_8253PIT_H
-
/*
* 8253/8254 Programmable Interval Timer
*/
-
-#define PIT_TICK_RATE 1193182UL
-
-#endif /* _ASM_POWERPC_8253PIT_H */
#include <asm/processor.h>
#include <asm/tsc.h>
-/* The PIT ticks at this frequency (in HZ): */
-#define PIT_TICK_RATE 1193182
-
+/* Assume we use the PIT time source for the clock tick */
#define CLOCK_TICK_RATE PIT_TICK_RATE
#define ARCH_HAS_READ_CURRENT_TIMER
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/module.h>
+#include <linux/timex.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/clocksource.h>
#include <linux/percpu.h>
+#include <linux/timex.h>
#include <asm/hpet.h>
#include <asm/timer.h>
#include <linux/acpi_pmtmr.h>
#include <linux/clocksource.h>
+#include <linux/timex.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/input.h>
#include <linux/gameport.h>
#include <linux/jiffies.h>
-#include <asm/timex.h>
+#include <linux/timex.h>
#define DRIVER_DESC "Analog joystick and gamepad driver"
#include <linux/init.h>
#include <linux/input.h>
#include <linux/platform_device.h>
+#include <linux/timex.h>
#include <asm/io.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
int read_current_timer(unsigned long *timer_val);
+/* The clock frequency of the i8253/i8254 PIT */
+#define PIT_TICK_RATE 1193182ul
+
#endif /* KERNEL */
#endif /* LINUX_TIMEX_H */
#define __PCSP_H__
#include <linux/hrtimer.h>
+#include <linux/timex.h>
#if defined(CONFIG_MIPS) || defined(CONFIG_X86)
/* Use the global PIT lock ! */
#include <asm/i8253.h>
#include <linux/init.h>
#include <linux/spinlock.h>
-#include <asm/timex.h>
+#include <linux/timex.h>
#include "sound_config.h"
#include "pas2.h"