ide-pmac: pmac_ide_tune_chipset() fixes

* Don't check check for pmif == NULL (it should never be NULL if we got here).

* Make a local copy of the timings and set the pmif->timings[] only after
  setting the transfer mode on the device (otherwise SELECT_DRIVE() call in
  pmac_ide_do_setfeature() will program new timings before the transfer mode
  is set on the device - this was pointed out by Sergei).  This change makes
  pmac_ide_tune_chipset() behavior match this of pmac_ide_{m,u}dma_enable().

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index b43457e3431159f7bf49a1b42960c7cc276b94ee..cfbe5690ca88772236bf70052077039d3828e017 100644 (file)
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -916,14 +916,15 @@ static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
        int unit = (drive->select.b.unit & 0x01);
        int ret = 0;
        pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
-       u32 *timings, *timings2;
+       u32 *timings, *timings2, tl[2];
 
-       if (pmif == NULL)
-               return 1;
-               
        timings = &pmif->timings[unit];
        timings2 = &pmif->timings[unit+2];
-       
+
+       /* Copy timings to local image */
+       tl[0] = *timings;
+       tl[1] = *timings2;
+
        switch(speed) {
 #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
                case XFER_UDMA_6:
@@ -934,19 +935,19 @@ static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
                case XFER_UDMA_1:
                case XFER_UDMA_0:
                        if (pmif->kind == controller_kl_ata4)
-                               ret = set_timings_udma_ata4(timings, speed);
+                               ret = set_timings_udma_ata4(&tl[0], speed);
                        else if (pmif->kind == controller_un_ata6
                                 || pmif->kind == controller_k2_ata6)
-                               ret = set_timings_udma_ata6(timings, timings2, speed);
+                               ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
                        else if (pmif->kind == controller_sh_ata6)
-                               ret = set_timings_udma_shasta(timings, timings2, speed);
+                               ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
                        else
-                               ret = 1;                
+                               ret = 1;
                        break;
                case XFER_MW_DMA_2:
                case XFER_MW_DMA_1:
                case XFER_MW_DMA_0:
-                       ret = set_timings_mdma(drive, pmif->kind, timings, timings2, speed, 0);
+                       ret = set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed, 0);
                        break;
                case XFER_SW_DMA_2:
                case XFER_SW_DMA_1:
@@ -962,7 +963,11 @@ static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
        ret = pmac_ide_do_setfeature(drive, speed);
        if (ret)
                return ret;
-               
+
+       /* Apply timings to controller */
+       *timings = tl[0];
+       *timings2 = tl[1];
+
        pmac_ide_do_update_timings(drive);      
 
        return 0;