drm/vc4: Add DPI driver
authorEric Anholt <eric@anholt.net>
Wed, 10 Feb 2016 19:42:32 +0000 (11:42 -0800)
committerEric Anholt <eric@anholt.net>
Thu, 14 Apr 2016 19:22:53 +0000 (12:22 -0700)
The DPI interface involves taking a ton of our GPIOs to be used as
outputs, and routing display signals over them in parallel.

v2: Use display_info.bus_formats[] to replace our custom DT
    properties.
v3: Rebase on V3D documentation changes.
v4: Fix rebase detritus from V3D documentation changes.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Rob Herring <robh@kernel.org>
Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
drivers/gpu/drm/vc4/Kconfig
drivers/gpu/drm/vc4/Makefile
drivers/gpu/drm/vc4/vc4_debugfs.c
drivers/gpu/drm/vc4/vc4_dpi.c [new file with mode: 0644]
drivers/gpu/drm/vc4/vc4_drv.c
drivers/gpu/drm/vc4/vc4_drv.h

index 9f97df4d51524bf55beff1f3e3eaace0b8e61637..a5ea451e67fcfe8cf08b94aab409fe05d5095c24 100644 (file)
@@ -35,12 +35,22 @@ Optional properties for HDMI:
                  as an interrupt/status bit in the HDMI controller
                  itself).  See bindings/pinctrl/brcm,bcm2835-gpio.txt
 
+Required properties for DPI:
+- compatible:  Should be "brcm,bcm2835-dpi"
+- reg:         Physical base address and length of the registers
+- clocks:      a) core: The core clock the unit runs on
+               b) pixel: The pixel clock that feeds the pixelvalve
+- port:                Port node with a single endpoint connecting to the panel
+                 device, as defined in [1]
+
 Required properties for V3D:
 - compatible:  Should be "brcm,bcm2835-v3d"
 - reg:         Physical base address and length of the V3D's registers
 - interrupts:  The interrupt number
                  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
 
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+
 Example:
 pixelvalve@7e807000 {
        compatible = "brcm,bcm2835-pixelvalve2";
@@ -66,6 +76,22 @@ hdmi: hdmi@7e902000 {
        clock-names = "pixel", "hdmi";
 };
 
+dpi: dpi@7e208000 {
+       compatible = "brcm,bcm2835-dpi";
+       reg = <0x7e208000 0x8c>;
+       clocks = <&clocks BCM2835_CLOCK_VPU>,
+                <&clocks BCM2835_CLOCK_DPI>;
+       clock-names = "core", "pixel";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       port {
+               dpi_out: endpoint@0 {
+                       remote-endpoint = <&panel_in>;
+               };
+       };
+};
+
 v3d: v3d@7ec00000 {
        compatible = "brcm,bcm2835-v3d";
        reg = <0x7ec00000 0x1000>;
@@ -75,3 +101,13 @@ v3d: v3d@7ec00000 {
 vc4: gpu {
        compatible = "brcm,bcm2835-vc4";
 };
+
+panel: panel {
+       compatible = "ontat,yx700wv03", "simple-panel";
+
+       port {
+               panel_in: endpoint {
+                       remote-endpoint = <&dpi_out>;
+               };
+       };
+};
index 584810474e5b84b211a5cbda681ea04c41bc0055..e53df59cb139f25f8e6ae916bca93abf0c49e063 100644 (file)
@@ -5,6 +5,7 @@ config DRM_VC4
        select DRM_KMS_HELPER
        select DRM_KMS_CMA_HELPER
        select DRM_GEM_CMA_HELPER
+       select DRM_PANEL
        help
          Choose this option if you have a system that has a Broadcom
          VC4 GPU, such as the Raspberry Pi or other BCM2708/BCM2835.
index 4c6a99f0398c03ce5d83dea1ec3f7906a817bf89..fb77db755e0a29d8589860da82186c7a1f394c72 100644 (file)
@@ -7,6 +7,7 @@ vc4-y := \
        vc4_bo.o \
        vc4_crtc.o \
        vc4_drv.o \
+       vc4_dpi.o \
        vc4_kms.o \
        vc4_gem.o \
        vc4_hdmi.o \
index d76ad10b07fda3bb674f45c2151e621c60633364..245115d49c46a1244ef3e460a03fde397f763de8 100644 (file)
@@ -17,6 +17,7 @@
 
 static const struct drm_info_list vc4_debugfs_list[] = {
        {"bo_stats", vc4_bo_stats_debugfs, 0},
+       {"dpi_regs", vc4_dpi_debugfs_regs, 0},
        {"hdmi_regs", vc4_hdmi_debugfs_regs, 0},
        {"hvs_regs", vc4_hvs_debugfs_regs, 0},
        {"crtc0_regs", vc4_crtc_debugfs_regs, 0, (void *)(uintptr_t)0},
diff --git a/drivers/gpu/drm/vc4/vc4_dpi.c b/drivers/gpu/drm/vc4/vc4_dpi.c
new file mode 100644 (file)
index 0000000..9817dbf
--- /dev/null
@@ -0,0 +1,520 @@
+/*
+ * Copyright (C) 2016 Broadcom Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * DOC: VC4 DPI module
+ *
+ * The VC4 DPI hardware supports MIPI DPI type 4 and Nokia ViSSI
+ * signals, which are routed out to GPIO0-27 with the ALT2 function.
+ */
+
+#include "drm_atomic_helper.h"
+#include "drm_crtc_helper.h"
+#include "drm_edid.h"
+#include "drm_panel.h"
+#include "linux/clk.h"
+#include "linux/component.h"
+#include "linux/of_graph.h"
+#include "linux/of_platform.h"
+#include "vc4_drv.h"
+#include "vc4_regs.h"
+
+#define DPI_C                  0x00
+# define DPI_OUTPUT_ENABLE_MODE                BIT(16)
+
+/* The order field takes the incoming 24 bit RGB from the pixel valve
+ * and shuffles the 3 channels.
+ */
+# define DPI_ORDER_MASK                        VC4_MASK(15, 14)
+# define DPI_ORDER_SHIFT               14
+# define DPI_ORDER_RGB                 0
+# define DPI_ORDER_BGR                 1
+# define DPI_ORDER_GRB                 2
+# define DPI_ORDER_BRG                 3
+
+/* The format field takes the ORDER-shuffled pixel valve data and
+ * formats it onto the output lines.
+ */
+# define DPI_FORMAT_MASK               VC4_MASK(13, 11)
+# define DPI_FORMAT_SHIFT              11
+/* This define is named in the hardware, but actually just outputs 0. */
+# define DPI_FORMAT_9BIT_666_RGB       0
+/* Outputs 00000000rrrrrggggggbbbbb */
+# define DPI_FORMAT_16BIT_565_RGB_1    1
+/* Outputs 000rrrrr00gggggg000bbbbb */
+# define DPI_FORMAT_16BIT_565_RGB_2    2
+/* Outputs 00rrrrr000gggggg00bbbbb0 */
+# define DPI_FORMAT_16BIT_565_RGB_3    3
+/* Outputs 000000rrrrrrggggggbbbbbb */
+# define DPI_FORMAT_18BIT_666_RGB_1    4
+/* Outputs 00rrrrrr00gggggg00bbbbbb */
+# define DPI_FORMAT_18BIT_666_RGB_2    5
+/* Outputs rrrrrrrrggggggggbbbbbbbb */
+# define DPI_FORMAT_24BIT_888_RGB      6
+
+/* Reverses the polarity of the corresponding signal */
+# define DPI_PIXEL_CLK_INVERT          BIT(10)
+# define DPI_HSYNC_INVERT              BIT(9)
+# define DPI_VSYNC_INVERT              BIT(8)
+# define DPI_OUTPUT_ENABLE_INVERT      BIT(7)
+
+/* Outputs the signal the falling clock edge instead of rising. */
+# define DPI_HSYNC_NEGATE              BIT(6)
+# define DPI_VSYNC_NEGATE              BIT(5)
+# define DPI_OUTPUT_ENABLE_NEGATE      BIT(4)
+
+/* Disables the signal */
+# define DPI_HSYNC_DISABLE             BIT(3)
+# define DPI_VSYNC_DISABLE             BIT(2)
+# define DPI_OUTPUT_ENABLE_DISABLE     BIT(1)
+
+/* Power gate to the device, full reset at 0 -> 1 transition */
+# define DPI_ENABLE                    BIT(0)
+
+/* All other registers besides DPI_C return the ID */
+#define DPI_ID                 0x04
+# define DPI_ID_VALUE          0x00647069
+
+/* General DPI hardware state. */
+struct vc4_dpi {
+       struct platform_device *pdev;
+
+       struct drm_encoder *encoder;
+       struct drm_connector *connector;
+       struct drm_panel *panel;
+
+       void __iomem *regs;
+
+       struct clk *pixel_clock;
+       struct clk *core_clock;
+};
+
+#define DPI_READ(offset) readl(dpi->regs + (offset))
+#define DPI_WRITE(offset, val) writel(val, dpi->regs + (offset))
+
+/* VC4 DPI encoder KMS struct */
+struct vc4_dpi_encoder {
+       struct vc4_encoder base;
+       struct vc4_dpi *dpi;
+};
+
+static inline struct vc4_dpi_encoder *
+to_vc4_dpi_encoder(struct drm_encoder *encoder)
+{
+       return container_of(encoder, struct vc4_dpi_encoder, base.base);
+}
+
+/* VC4 DPI connector KMS struct */
+struct vc4_dpi_connector {
+       struct drm_connector base;
+       struct vc4_dpi *dpi;
+
+       /* Since the connector is attached to just the one encoder,
+        * this is the reference to it so we can do the best_encoder()
+        * hook.
+        */
+       struct drm_encoder *encoder;
+};
+
+static inline struct vc4_dpi_connector *
+to_vc4_dpi_connector(struct drm_connector *connector)
+{
+       return container_of(connector, struct vc4_dpi_connector, base);
+}
+
+#define DPI_REG(reg) { reg, #reg }
+static const struct {
+       u32 reg;
+       const char *name;
+} dpi_regs[] = {
+       DPI_REG(DPI_C),
+       DPI_REG(DPI_ID),
+};
+
+static void vc4_dpi_dump_regs(struct vc4_dpi *dpi)
+{
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(dpi_regs); i++) {
+               DRM_INFO("0x%04x (%s): 0x%08x\n",
+                        dpi_regs[i].reg, dpi_regs[i].name,
+                        DPI_READ(dpi_regs[i].reg));
+       }
+}
+
+#ifdef CONFIG_DEBUG_FS
+int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused)
+{
+       struct drm_info_node *node = (struct drm_info_node *)m->private;
+       struct drm_device *dev = node->minor->dev;
+       struct vc4_dev *vc4 = to_vc4_dev(dev);
+       struct vc4_dpi *dpi = vc4->dpi;
+       int i;
+
+       if (!dpi)
+               return 0;
+
+       for (i = 0; i < ARRAY_SIZE(dpi_regs); i++) {
+               seq_printf(m, "%s (0x%04x): 0x%08x\n",
+                          dpi_regs[i].name, dpi_regs[i].reg,
+                          DPI_READ(dpi_regs[i].reg));
+       }
+
+       return 0;
+}
+#endif
+
+static enum drm_connector_status
+vc4_dpi_connector_detect(struct drm_connector *connector, bool force)
+{
+       struct vc4_dpi_connector *vc4_connector =
+               to_vc4_dpi_connector(connector);
+       struct vc4_dpi *dpi = vc4_connector->dpi;
+
+       if (dpi->panel)
+               return connector_status_connected;
+       else
+               return connector_status_disconnected;
+}
+
+static void vc4_dpi_connector_destroy(struct drm_connector *connector)
+{
+       drm_connector_unregister(connector);
+       drm_connector_cleanup(connector);
+}
+
+static int vc4_dpi_connector_get_modes(struct drm_connector *connector)
+{
+       struct vc4_dpi_connector *vc4_connector =
+               to_vc4_dpi_connector(connector);
+       struct vc4_dpi *dpi = vc4_connector->dpi;
+
+       if (dpi->panel)
+               return drm_panel_get_modes(dpi->panel);
+
+       return 0;
+}
+
+static struct drm_encoder *
+vc4_dpi_connector_best_encoder(struct drm_connector *connector)
+{
+       struct vc4_dpi_connector *dpi_connector =
+               to_vc4_dpi_connector(connector);
+       return dpi_connector->encoder;
+}
+
+static const struct drm_connector_funcs vc4_dpi_connector_funcs = {
+       .dpms = drm_atomic_helper_connector_dpms,
+       .detect = vc4_dpi_connector_detect,
+       .fill_modes = drm_helper_probe_single_connector_modes,
+       .destroy = vc4_dpi_connector_destroy,
+       .reset = drm_atomic_helper_connector_reset,
+       .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+       .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs vc4_dpi_connector_helper_funcs = {
+       .get_modes = vc4_dpi_connector_get_modes,
+       .best_encoder = vc4_dpi_connector_best_encoder,
+};
+
+static struct drm_connector *vc4_dpi_connector_init(struct drm_device *dev,
+                                                   struct vc4_dpi *dpi)
+{
+       struct drm_connector *connector = NULL;
+       struct vc4_dpi_connector *dpi_connector;
+       int ret = 0;
+
+       dpi_connector = devm_kzalloc(dev->dev, sizeof(*dpi_connector),
+                                    GFP_KERNEL);
+       if (!dpi_connector) {
+               ret = -ENOMEM;
+               goto fail;
+       }
+       connector = &dpi_connector->base;
+
+       dpi_connector->encoder = dpi->encoder;
+       dpi_connector->dpi = dpi;
+
+       drm_connector_init(dev, connector, &vc4_dpi_connector_funcs,
+                          DRM_MODE_CONNECTOR_DPI);
+       drm_connector_helper_add(connector, &vc4_dpi_connector_helper_funcs);
+
+       connector->polled = 0;
+       connector->interlace_allowed = 0;
+       connector->doublescan_allowed = 0;
+
+       drm_mode_connector_attach_encoder(connector, dpi->encoder);
+
+       return connector;
+
+ fail:
+       if (connector)
+               vc4_dpi_connector_destroy(connector);
+
+       return ERR_PTR(ret);
+}
+
+static const struct drm_encoder_funcs vc4_dpi_encoder_funcs = {
+       .destroy = drm_encoder_cleanup,
+};
+
+static void vc4_dpi_encoder_disable(struct drm_encoder *encoder)
+{
+       struct vc4_dpi_encoder *vc4_encoder = to_vc4_dpi_encoder(encoder);
+       struct vc4_dpi *dpi = vc4_encoder->dpi;
+
+       drm_panel_disable(dpi->panel);
+
+       clk_disable_unprepare(dpi->pixel_clock);
+
+       drm_panel_unprepare(dpi->panel);
+}
+
+static void vc4_dpi_encoder_enable(struct drm_encoder *encoder)
+{
+       struct drm_display_mode *mode = &encoder->crtc->mode;
+       struct vc4_dpi_encoder *vc4_encoder = to_vc4_dpi_encoder(encoder);
+       struct vc4_dpi *dpi = vc4_encoder->dpi;
+       u32 dpi_c = DPI_ENABLE | DPI_OUTPUT_ENABLE_MODE;
+       int ret;
+
+       ret = drm_panel_prepare(dpi->panel);
+       if (ret) {
+               DRM_ERROR("Panel failed to prepare\n");
+               return;
+       }
+
+       if (dpi->connector->display_info.num_bus_formats) {
+               u32 bus_format = dpi->connector->display_info.bus_formats[0];
+
+               switch (bus_format) {
+               case MEDIA_BUS_FMT_RGB888_1X24:
+                       dpi_c |= VC4_SET_FIELD(DPI_FORMAT_24BIT_888_RGB,
+                                              DPI_FORMAT);
+                       break;
+               case MEDIA_BUS_FMT_BGR888_1X24:
+                       dpi_c |= VC4_SET_FIELD(DPI_FORMAT_24BIT_888_RGB,
+                                              DPI_FORMAT);
+                       dpi_c |= VC4_SET_FIELD(DPI_ORDER_BGR, DPI_ORDER);
+                       break;
+               case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
+                       dpi_c |= VC4_SET_FIELD(DPI_FORMAT_18BIT_666_RGB_2,
+                                              DPI_FORMAT);
+                       break;
+               case MEDIA_BUS_FMT_RGB666_1X18:
+                       dpi_c |= VC4_SET_FIELD(DPI_FORMAT_18BIT_666_RGB_1,
+                                              DPI_FORMAT);
+                       break;
+               case MEDIA_BUS_FMT_RGB565_1X16:
+                       dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_3,
+                                              DPI_FORMAT);
+                       break;
+               default:
+                       DRM_ERROR("Unknown media bus format %d\n", bus_format);
+                       break;
+               }
+       }
+
+       if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+               dpi_c |= DPI_HSYNC_INVERT;
+       else if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
+               dpi_c |= DPI_HSYNC_DISABLE;
+
+       if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+               dpi_c |= DPI_VSYNC_INVERT;
+       else if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
+               dpi_c |= DPI_VSYNC_DISABLE;
+
+       DPI_WRITE(DPI_C, dpi_c);
+
+       ret = clk_set_rate(dpi->pixel_clock, mode->clock * 1000);
+       if (ret)
+               DRM_ERROR("Failed to set clock rate: %d\n", ret);
+
+       ret = clk_prepare_enable(dpi->pixel_clock);
+       if (ret)
+               DRM_ERROR("Failed to set clock rate: %d\n", ret);
+
+       ret = drm_panel_enable(dpi->panel);
+       if (ret) {
+               DRM_ERROR("Panel failed to enable\n");
+               drm_panel_unprepare(dpi->panel);
+               return;
+       }
+}
+
+static const struct drm_encoder_helper_funcs vc4_dpi_encoder_helper_funcs = {
+       .disable = vc4_dpi_encoder_disable,
+       .enable = vc4_dpi_encoder_enable,
+};
+
+static const struct of_device_id vc4_dpi_dt_match[] = {
+       { .compatible = "brcm,bcm2835-dpi", .data = NULL },
+       {}
+};
+
+/* Walks the OF graph to find the panel node and then asks DRM to look
+ * up the panel.
+ */
+static struct drm_panel *vc4_dpi_get_panel(struct device *dev)
+{
+       struct device_node *endpoint, *panel_node;
+       struct device_node *np = dev->of_node;
+       struct drm_panel *panel;
+
+       endpoint = of_graph_get_next_endpoint(np, NULL);
+       if (!endpoint) {
+               dev_err(dev, "no endpoint to fetch DPI panel\n");
+               return NULL;
+       }
+
+       /* don't proceed if we have an endpoint but no panel_node tied to it */
+       panel_node = of_graph_get_remote_port_parent(endpoint);
+       of_node_put(endpoint);
+       if (!panel_node) {
+               dev_err(dev, "no valid panel node\n");
+               return NULL;
+       }
+
+       panel = of_drm_find_panel(panel_node);
+       of_node_put(panel_node);
+
+       return panel;
+}
+
+static int vc4_dpi_bind(struct device *dev, struct device *master, void *data)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct drm_device *drm = dev_get_drvdata(master);
+       struct vc4_dev *vc4 = to_vc4_dev(drm);
+       struct vc4_dpi *dpi;
+       struct vc4_dpi_encoder *vc4_dpi_encoder;
+       int ret;
+
+       dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL);
+       if (!dpi)
+               return -ENOMEM;
+
+       vc4_dpi_encoder = devm_kzalloc(dev, sizeof(*vc4_dpi_encoder),
+                                      GFP_KERNEL);
+       if (!vc4_dpi_encoder)
+               return -ENOMEM;
+       vc4_dpi_encoder->base.type = VC4_ENCODER_TYPE_DPI;
+       vc4_dpi_encoder->dpi = dpi;
+       dpi->encoder = &vc4_dpi_encoder->base.base;
+
+       dpi->pdev = pdev;
+       dpi->regs = vc4_ioremap_regs(pdev, 0);
+       if (IS_ERR(dpi->regs))
+               return PTR_ERR(dpi->regs);
+
+       vc4_dpi_dump_regs(dpi);
+
+       if (DPI_READ(DPI_ID) != DPI_ID_VALUE) {
+               dev_err(dev, "Port returned 0x%08x for ID instead of 0x%08x\n",
+                       DPI_READ(DPI_ID), DPI_ID_VALUE);
+               return -ENODEV;
+       }
+
+       dpi->core_clock = devm_clk_get(dev, "core");
+       if (IS_ERR(dpi->core_clock)) {
+               ret = PTR_ERR(dpi->core_clock);
+               if (ret != -EPROBE_DEFER)
+                       DRM_ERROR("Failed to get core clock: %d\n", ret);
+               return ret;
+       }
+       dpi->pixel_clock = devm_clk_get(dev, "pixel");
+       if (IS_ERR(dpi->pixel_clock)) {
+               ret = PTR_ERR(dpi->pixel_clock);
+               if (ret != -EPROBE_DEFER)
+                       DRM_ERROR("Failed to get pixel clock: %d\n", ret);
+               return ret;
+       }
+
+       ret = clk_prepare_enable(dpi->core_clock);
+       if (ret)
+               DRM_ERROR("Failed to turn on core clock: %d\n", ret);
+
+       dpi->panel = vc4_dpi_get_panel(dev);
+
+       drm_encoder_init(drm, dpi->encoder, &vc4_dpi_encoder_funcs,
+                        DRM_MODE_ENCODER_DPI, NULL);
+       drm_encoder_helper_add(dpi->encoder, &vc4_dpi_encoder_helper_funcs);
+
+       dpi->connector = vc4_dpi_connector_init(drm, dpi);
+       if (IS_ERR(dpi->connector)) {
+               ret = PTR_ERR(dpi->connector);
+               goto err_destroy_encoder;
+       }
+
+       if (dpi->panel)
+               drm_panel_attach(dpi->panel, dpi->connector);
+
+       dev_set_drvdata(dev, dpi);
+
+       vc4->dpi = dpi;
+
+       return 0;
+
+err_destroy_encoder:
+       drm_encoder_cleanup(dpi->encoder);
+       clk_disable_unprepare(dpi->core_clock);
+       return ret;
+}
+
+static void vc4_dpi_unbind(struct device *dev, struct device *master,
+                          void *data)
+{
+       struct drm_device *drm = dev_get_drvdata(master);
+       struct vc4_dev *vc4 = to_vc4_dev(drm);
+       struct vc4_dpi *dpi = dev_get_drvdata(dev);
+
+       if (dpi->panel)
+               drm_panel_detach(dpi->panel);
+
+       vc4_dpi_connector_destroy(dpi->connector);
+       drm_encoder_cleanup(dpi->encoder);
+
+       clk_disable_unprepare(dpi->core_clock);
+
+       vc4->dpi = NULL;
+}
+
+static const struct component_ops vc4_dpi_ops = {
+       .bind   = vc4_dpi_bind,
+       .unbind = vc4_dpi_unbind,
+};
+
+static int vc4_dpi_dev_probe(struct platform_device *pdev)
+{
+       return component_add(&pdev->dev, &vc4_dpi_ops);
+}
+
+static int vc4_dpi_dev_remove(struct platform_device *pdev)
+{
+       component_del(&pdev->dev, &vc4_dpi_ops);
+       return 0;
+}
+
+struct platform_driver vc4_dpi_driver = {
+       .probe = vc4_dpi_dev_probe,
+       .remove = vc4_dpi_dev_remove,
+       .driver = {
+               .name = "vc4_dpi",
+               .of_match_table = vc4_dpi_dt_match,
+       },
+};
index b7d2ff0e6e1fb6d9611b7a98b8b1af0303b2ac9d..54f9f52fa004440e6b9e2fb5d7eb257c04d94107 100644 (file)
@@ -237,6 +237,7 @@ static const struct component_master_ops vc4_drm_ops = {
 
 static struct platform_driver *const component_drivers[] = {
        &vc4_hdmi_driver,
+       &vc4_dpi_driver,
        &vc4_crtc_driver,
        &vc4_hvs_driver,
        &vc4_v3d_driver,
index fa2ad15d4f62b8baea68e09b52f4edf1c70bb6b6..37cac59401d734e047f4cf41cc6a9ecb5bfc6dbc 100644 (file)
@@ -16,6 +16,7 @@ struct vc4_dev {
        struct vc4_hvs *hvs;
        struct vc4_crtc *crtc[3];
        struct vc4_v3d *v3d;
+       struct vc4_dpi *dpi;
 
        struct drm_fbdev_cma *fbdev;
 
@@ -422,6 +423,10 @@ void vc4_debugfs_cleanup(struct drm_minor *minor);
 /* vc4_drv.c */
 void __iomem *vc4_ioremap_regs(struct platform_device *dev, int index);
 
+/* vc4_dpi.c */
+extern struct platform_driver vc4_dpi_driver;
+int vc4_dpi_debugfs_regs(struct seq_file *m, void *unused);
+
 /* vc4_gem.c */
 void vc4_gem_init(struct drm_device *dev);
 void vc4_gem_destroy(struct drm_device *dev);