spi: remove i.MX SPI driver
authorSascha Hauer <s.hauer@pengutronix.de>
Tue, 22 Sep 2009 23:45:56 +0000 (16:45 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 23 Sep 2009 14:39:42 +0000 (07:39 -0700)
This driver is in a non working state at the moment and will be replaced
by a bitbang driver which can also handle the newer i.MX variants

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: David Brownell <david-b@pacbell.net>
Acked-by: Andrea Paterniani <a.paterniani@swapp-eng.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/spi/Kconfig
drivers/spi/Makefile
drivers/spi/spi_imx.c [deleted file]

index 2c733c27db2f4dd95d938528d52104ab4c9d0a85..86056d1409b11e7be37fde58af8c815930491e5e 100644 (file)
@@ -116,13 +116,6 @@ config SPI_GPIO
          GPIO operations, you should be able to leverage that for better
          speed with a custom version of this driver; see the source code.
 
-config SPI_IMX
-       tristate "Freescale iMX SPI controller"
-       depends on ARCH_MX1 && EXPERIMENTAL
-       help
-         This enables using the Freescale iMX SPI controller in master
-         mode.
-
 config SPI_LM70_LLP
        tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
        depends on PARPORT && EXPERIMENTAL
index 3de408d294bac6910a1ff71997367043bbd5b1f9..0f20a70b2fa9458a61f865df30c3f83ec6082dd6 100644 (file)
@@ -17,7 +17,6 @@ obj-$(CONFIG_SPI_BITBANG)             += spi_bitbang.o
 obj-$(CONFIG_SPI_AU1550)               += au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)            += spi_butterfly.o
 obj-$(CONFIG_SPI_GPIO)                 += spi_gpio.o
-obj-$(CONFIG_SPI_IMX)                  += spi_imx.o
 obj-$(CONFIG_SPI_LM70_LLP)             += spi_lm70llp.o
 obj-$(CONFIG_SPI_PXA2XX)               += pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)           += omap_uwire.o
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
deleted file mode 100644 (file)
index c195e45..0000000
+++ /dev/null
@@ -1,1770 +0,0 @@
-/*
- * drivers/spi/spi_imx.c
- *
- * Copyright (C) 2006 SWAPP
- *     Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *     linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-
-#include <mach/hardware.h>
-#include <mach/imx-dma.h>
-#include <mach/spi_imx.h>
-
-/*-------------------------------------------------------------------------*/
-/* SPI Registers offsets from peripheral base address */
-#define SPI_RXDATA             (0x00)
-#define SPI_TXDATA             (0x04)
-#define SPI_CONTROL            (0x08)
-#define SPI_INT_STATUS         (0x0C)
-#define SPI_TEST               (0x10)
-#define SPI_PERIOD             (0x14)
-#define SPI_DMA                        (0x18)
-#define SPI_RESET              (0x1C)
-
-/* SPI Control Register Bit Fields & Masks */
-#define SPI_CONTROL_BITCOUNT_MASK      (0xF)           /* Bit Count Mask */
-#define SPI_CONTROL_BITCOUNT(n)                (((n) - 1) & SPI_CONTROL_BITCOUNT_MASK)
-#define SPI_CONTROL_POL                        (0x1 << 4)      /* Clock Polarity Mask */
-#define SPI_CONTROL_POL_ACT_HIGH       (0x0 << 4)      /* Active high pol. (0=idle) */
-#define SPI_CONTROL_POL_ACT_LOW                (0x1 << 4)      /* Active low pol. (1=idle) */
-#define SPI_CONTROL_PHA                        (0x1 << 5)      /* Clock Phase Mask */
-#define SPI_CONTROL_PHA_0              (0x0 << 5)      /* Clock Phase 0 */
-#define SPI_CONTROL_PHA_1              (0x1 << 5)      /* Clock Phase 1 */
-#define SPI_CONTROL_SSCTL              (0x1 << 6)      /* /SS Waveform Select Mask */
-#define SPI_CONTROL_SSCTL_0            (0x0 << 6)      /* Master: /SS stays low between SPI burst
-                                                          Slave: RXFIFO advanced by BIT_COUNT */
-#define SPI_CONTROL_SSCTL_1            (0x1 << 6)      /* Master: /SS insert pulse between SPI burst
-                                                          Slave: RXFIFO advanced by /SS rising edge */
-#define SPI_CONTROL_SSPOL              (0x1 << 7)      /* /SS Polarity Select Mask */
-#define SPI_CONTROL_SSPOL_ACT_LOW      (0x0 << 7)      /* /SS Active low */
-#define SPI_CONTROL_SSPOL_ACT_HIGH     (0x1 << 7)      /* /SS Active high */
-#define SPI_CONTROL_XCH                        (0x1 << 8)      /* Exchange */
-#define SPI_CONTROL_SPIEN              (0x1 << 9)      /* SPI Module Enable */
-#define SPI_CONTROL_MODE               (0x1 << 10)     /* SPI Mode Select Mask */
-#define SPI_CONTROL_MODE_SLAVE         (0x0 << 10)     /* SPI Mode Slave */
-#define SPI_CONTROL_MODE_MASTER                (0x1 << 10)     /* SPI Mode Master */
-#define SPI_CONTROL_DRCTL              (0x3 << 11)     /* /SPI_RDY Control Mask */
-#define SPI_CONTROL_DRCTL_0            (0x0 << 11)     /* Ignore /SPI_RDY */
-#define SPI_CONTROL_DRCTL_1            (0x1 << 11)     /* /SPI_RDY falling edge triggers input */
-#define SPI_CONTROL_DRCTL_2            (0x2 << 11)     /* /SPI_RDY active low level triggers input */
-#define SPI_CONTROL_DATARATE           (0x7 << 13)     /* Data Rate Mask */
-#define SPI_PERCLK2_DIV_MIN            (0)             /* PERCLK2:4 */
-#define SPI_PERCLK2_DIV_MAX            (7)             /* PERCLK2:512 */
-#define SPI_CONTROL_DATARATE_MIN       (SPI_PERCLK2_DIV_MAX << 13)
-#define SPI_CONTROL_DATARATE_MAX       (SPI_PERCLK2_DIV_MIN << 13)
-#define SPI_CONTROL_DATARATE_BAD       (SPI_CONTROL_DATARATE_MIN + 1)
-
-/* SPI Interrupt/Status Register Bit Fields & Masks */
-#define SPI_STATUS_TE  (0x1 << 0)      /* TXFIFO Empty Status */
-#define SPI_STATUS_TH  (0x1 << 1)      /* TXFIFO Half Status */
-#define SPI_STATUS_TF  (0x1 << 2)      /* TXFIFO Full Status */
-#define SPI_STATUS_RR  (0x1 << 3)      /* RXFIFO Data Ready Status */
-#define SPI_STATUS_RH  (0x1 << 4)      /* RXFIFO Half Status */
-#define SPI_STATUS_RF  (0x1 << 5)      /* RXFIFO Full Status */
-#define SPI_STATUS_RO  (0x1 << 6)      /* RXFIFO Overflow */
-#define SPI_STATUS_BO  (0x1 << 7)      /* Bit Count Overflow */
-#define SPI_STATUS     (0xFF)          /* SPI Status Mask */
-#define SPI_INTEN_TE   (0x1 << 8)      /* TXFIFO Empty Interrupt Enable */
-#define SPI_INTEN_TH   (0x1 << 9)      /* TXFIFO Half Interrupt Enable */
-#define SPI_INTEN_TF   (0x1 << 10)     /* TXFIFO Full Interrupt Enable */
-#define SPI_INTEN_RE   (0x1 << 11)     /* RXFIFO Data Ready Interrupt Enable */
-#define SPI_INTEN_RH   (0x1 << 12)     /* RXFIFO Half Interrupt Enable */
-#define SPI_INTEN_RF   (0x1 << 13)     /* RXFIFO Full Interrupt Enable */
-#define SPI_INTEN_RO   (0x1 << 14)     /* RXFIFO Overflow Interrupt Enable */
-#define SPI_INTEN_BO   (0x1 << 15)     /* Bit Count Overflow Interrupt Enable */
-#define SPI_INTEN      (0xFF << 8)     /* SPI Interrupt Enable Mask */
-
-/* SPI Test Register Bit Fields & Masks */
-#define SPI_TEST_TXCNT         (0xF << 0)      /* TXFIFO Counter */
-#define SPI_TEST_RXCNT_LSB     (4)             /* RXFIFO Counter LSB */
-#define SPI_TEST_RXCNT         (0xF << 4)      /* RXFIFO Counter */
-#define SPI_TEST_SSTATUS       (0xF << 8)      /* State Machine Status */
-#define SPI_TEST_LBC           (0x1 << 14)     /* Loop Back Control */
-
-/* SPI Period Register Bit Fields & Masks */
-#define SPI_PERIOD_WAIT                (0x7FFF << 0)   /* Wait Between Transactions */
-#define SPI_PERIOD_MAX_WAIT    (0x7FFF)        /* Max Wait Between
-                                                       Transactions */
-#define SPI_PERIOD_CSRC                (0x1 << 15)     /* Period Clock Source Mask */
-#define SPI_PERIOD_CSRC_BCLK   (0x0 << 15)     /* Period Clock Source is
-                                                       Bit Clock */
-#define SPI_PERIOD_CSRC_32768  (0x1 << 15)     /* Period Clock Source is
-                                                       32.768 KHz Clock */
-
-/* SPI DMA Register Bit Fields & Masks */
-#define SPI_DMA_RHDMA  (0x1 << 4)      /* RXFIFO Half Status */
-#define SPI_DMA_RFDMA  (0x1 << 5)      /* RXFIFO Full Status */
-#define SPI_DMA_TEDMA  (0x1 << 6)      /* TXFIFO Empty Status */
-#define SPI_DMA_THDMA  (0x1 << 7)      /* TXFIFO Half Status */
-#define SPI_DMA_RHDEN  (0x1 << 12)     /* RXFIFO Half DMA Request Enable */
-#define SPI_DMA_RFDEN  (0x1 << 13)     /* RXFIFO Full DMA Request Enable */
-#define SPI_DMA_TEDEN  (0x1 << 14)     /* TXFIFO Empty DMA Request Enable */
-#define SPI_DMA_THDEN  (0x1 << 15)     /* TXFIFO Half DMA Request Enable */
-
-/* SPI Soft Reset Register Bit Fields & Masks */
-#define SPI_RESET_START        (0x1)           /* Start */
-
-/* Default SPI configuration values */
-#define SPI_DEFAULT_CONTROL            \
-(                                      \
-       SPI_CONTROL_BITCOUNT(16) |      \
-       SPI_CONTROL_POL_ACT_HIGH |      \
-       SPI_CONTROL_PHA_0 |             \
-       SPI_CONTROL_SPIEN |             \
-       SPI_CONTROL_SSCTL_1 |           \
-       SPI_CONTROL_MODE_MASTER |       \
-       SPI_CONTROL_DRCTL_0 |           \
-       SPI_CONTROL_DATARATE_MIN        \
-)
-#define SPI_DEFAULT_ENABLE_LOOPBACK    (0)
-#define SPI_DEFAULT_ENABLE_DMA         (0)
-#define SPI_DEFAULT_PERIOD_WAIT                (8)
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/* TX/RX SPI FIFO size */
-#define SPI_FIFO_DEPTH                 (8)
-#define SPI_FIFO_BYTE_WIDTH            (2)
-#define SPI_FIFO_OVERFLOW_MARGIN       (2)
-
-/* DMA burst length for half full/empty request trigger */
-#define SPI_DMA_BLR                    (SPI_FIFO_DEPTH * SPI_FIFO_BYTE_WIDTH / 2)
-
-/* Dummy char output to achieve reads.
-   Choosing something different from all zeroes may help pattern recogition
-   for oscilloscope analysis, but may break some drivers. */
-#define SPI_DUMMY_u8                   0
-#define SPI_DUMMY_u16                  ((SPI_DUMMY_u8 << 8) | SPI_DUMMY_u8)
-#define SPI_DUMMY_u32                  ((SPI_DUMMY_u16 << 16) | SPI_DUMMY_u16)
-
-/**
- * Macro to change a u32 field:
- * @r : register to edit
- * @m : bit mask
- * @v : new value for the field correctly bit-alligned
-*/
-#define u32_EDIT(r, m, v)              r = (r & ~(m)) | (v)
-
-/* Message state */
-#define START_STATE                    ((void*)0)
-#define RUNNING_STATE                  ((void*)1)
-#define DONE_STATE                     ((void*)2)
-#define ERROR_STATE                    ((void*)-1)
-
-/* Queue state */
-#define QUEUE_RUNNING                  (0)
-#define QUEUE_STOPPED                  (1)
-
-#define IS_DMA_ALIGNED(x)              (((u32)(x) & 0x03) == 0)
-#define DMA_ALIGNMENT                  4
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/* Driver data structs */
-
-/* Context */
-struct driver_data {
-       /* Driver model hookup */
-       struct platform_device *pdev;
-
-       /* SPI framework hookup */
-       struct spi_master *master;
-
-       /* IMX hookup */
-       struct spi_imx_master *master_info;
-
-       /* Memory resources and SPI regs virtual address */
-       struct resource *ioarea;
-       void __iomem *regs;
-
-       /* SPI RX_DATA physical address */
-       dma_addr_t rd_data_phys;
-
-       /* Driver message queue */
-       struct workqueue_struct *workqueue;
-       struct work_struct work;
-       spinlock_t lock;
-       struct list_head queue;
-       int busy;
-       int run;
-
-       /* Message Transfer pump */
-       struct tasklet_struct pump_transfers;
-
-       /* Current message, transfer and state */
-       struct spi_message *cur_msg;
-       struct spi_transfer *cur_transfer;
-       struct chip_data *cur_chip;
-
-       /* Rd / Wr buffers pointers */
-       size_t len;
-       void *tx;
-       void *tx_end;
-       void *rx;
-       void *rx_end;
-
-       u8 rd_only;
-       u8 n_bytes;
-       int cs_change;
-
-       /* Function pointers */
-       irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
-       void (*cs_control)(u32 command);
-
-       /* DMA setup */
-       int rx_channel;
-       int tx_channel;
-       dma_addr_t rx_dma;
-       dma_addr_t tx_dma;
-       int rx_dma_needs_unmap;
-       int tx_dma_needs_unmap;
-       size_t tx_map_len;
-       u32 dummy_dma_buf ____cacheline_aligned;
-
-       struct clk *clk;
-};
-
-/* Runtime state */
-struct chip_data {
-       u32 control;
-       u32 period;
-       u32 test;
-
-       u8 enable_dma:1;
-       u8 bits_per_word;
-       u8 n_bytes;
-       u32 max_speed_hz;
-
-       void (*cs_control)(u32 command);
-};
-/*-------------------------------------------------------------------------*/
-
-
-static void pump_messages(struct work_struct *work);
-
-static void flush(struct driver_data *drv_data)
-{
-       void __iomem *regs = drv_data->regs;
-       u32 control;
-
-       dev_dbg(&drv_data->pdev->dev, "flush\n");
-
-       /* Wait for end of transaction */
-       do {
-               control = readl(regs + SPI_CONTROL);
-       } while (control & SPI_CONTROL_XCH);
-
-       /* Release chip select if requested, transfer delays are
-          handled in pump_transfers */
-       if (drv_data->cs_change)
-               drv_data->cs_control(SPI_CS_DEASSERT);
-
-       /* Disable SPI to flush FIFOs */
-       writel(control & ~SPI_CONTROL_SPIEN, regs + SPI_CONTROL);
-       writel(control, regs + SPI_CONTROL);
-}
-
-static void restore_state(struct driver_data *drv_data)
-{
-       void __iomem *regs = drv_data->regs;
-       struct chip_data *chip = drv_data->cur_chip;
-
-       /* Load chip registers */
-       dev_dbg(&drv_data->pdev->dev,
-               "restore_state\n"
-               "    test    = 0x%08X\n"
-               "    control = 0x%08X\n",
-               chip->test,
-               chip->control);
-       writel(chip->test, regs + SPI_TEST);
-       writel(chip->period, regs + SPI_PERIOD);
-       writel(0, regs + SPI_INT_STATUS);
-       writel(chip->control, regs + SPI_CONTROL);
-}
-
-static void null_cs_control(u32 command)
-{
-}
-
-static inline u32 data_to_write(struct driver_data *drv_data)
-{
-       return ((u32)(drv_data->tx_end - drv_data->tx)) / drv_data->n_bytes;
-}
-
-static inline u32 data_to_read(struct driver_data *drv_data)
-{
-       return ((u32)(drv_data->rx_end - drv_data->rx)) / drv_data->n_bytes;
-}
-
-static int write(struct driver_data *drv_data)
-{
-       void __iomem *regs = drv_data->regs;
-       void *tx = drv_data->tx;
-       void *tx_end = drv_data->tx_end;
-       u8 n_bytes = drv_data->n_bytes;
-       u32 remaining_writes;
-       u32 fifo_avail_space;
-       u32 n;
-       u16 d;
-
-       /* Compute how many fifo writes to do */
-       remaining_writes = (u32)(tx_end - tx) / n_bytes;
-       fifo_avail_space = SPI_FIFO_DEPTH -
-                               (readl(regs + SPI_TEST) & SPI_TEST_TXCNT);
-       if (drv_data->rx && (fifo_avail_space > SPI_FIFO_OVERFLOW_MARGIN))
-               /* Fix misunderstood receive overflow */
-               fifo_avail_space -= SPI_FIFO_OVERFLOW_MARGIN;
-       n = min(remaining_writes, fifo_avail_space);
-
-       dev_dbg(&drv_data->pdev->dev,
-               "write type %s\n"
-               "    remaining writes = %d\n"
-               "    fifo avail space = %d\n"
-               "    fifo writes      = %d\n",
-               (n_bytes == 1) ? "u8" : "u16",
-               remaining_writes,
-               fifo_avail_space,
-               n);
-
-       if (n > 0) {
-               /* Fill SPI TXFIFO */
-               if (drv_data->rd_only) {
-                       tx += n * n_bytes;
-                       while (n--)
-                               writel(SPI_DUMMY_u16, regs + SPI_TXDATA);
-               } else {
-                       if (n_bytes == 1) {
-                               while (n--) {
-                                       d = *(u8*)tx;
-                                       writel(d, regs + SPI_TXDATA);
-                                       tx += 1;
-                               }
-                       } else {
-                               while (n--) {
-                                       d = *(u16*)tx;
-                                       writel(d, regs + SPI_TXDATA);
-                                       tx += 2;
-                               }
-                       }
-               }
-
-               /* Trigger transfer */
-               writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH,
-                       regs + SPI_CONTROL);
-
-               /* Update tx pointer */
-               drv_data->tx = tx;
-       }
-
-       return (tx >= tx_end);
-}
-
-static int read(struct driver_data *drv_data)
-{
-       void __iomem *regs = drv_data->regs;
-       void *rx = drv_data->rx;
-       void *rx_end = drv_data->rx_end;
-       u8 n_bytes = drv_data->n_bytes;
-       u32 remaining_reads;
-       u32 fifo_rxcnt;
-       u32 n;
-       u16 d;
-
-       /* Compute how many fifo reads to do */
-       remaining_reads = (u32)(rx_end - rx) / n_bytes;
-       fifo_rxcnt = (readl(regs + SPI_TEST) & SPI_TEST_RXCNT) >>
-                       SPI_TEST_RXCNT_LSB;
-       n = min(remaining_reads, fifo_rxcnt);
-
-       dev_dbg(&drv_data->pdev->dev,
-               "read type %s\n"
-               "    remaining reads = %d\n"
-               "    fifo rx count   = %d\n"
-               "    fifo reads      = %d\n",
-               (n_bytes == 1) ? "u8" : "u16",
-               remaining_reads,
-               fifo_rxcnt,
-               n);
-
-       if (n > 0) {
-               /* Read SPI RXFIFO */
-               if (n_bytes == 1) {
-                       while (n--) {
-                               d = readl(regs + SPI_RXDATA);
-                               *((u8*)rx) = d;
-                               rx += 1;
-                       }
-               } else {
-                       while (n--) {
-                               d = readl(regs + SPI_RXDATA);
-                               *((u16*)rx) = d;
-                               rx += 2;
-                       }
-               }
-
-               /* Update rx pointer */
-               drv_data->rx = rx;
-       }
-
-       return (rx >= rx_end);
-}
-
-static void *next_transfer(struct driver_data *drv_data)
-{
-       struct spi_message *msg = drv_data->cur_msg;
-       struct spi_transfer *trans = drv_data->cur_transfer;
-
-       /* Move to next transfer */
-       if (trans->transfer_list.next != &msg->transfers) {
-               drv_data->cur_transfer =
-                       list_entry(trans->transfer_list.next,
-                                       struct spi_transfer,
-                                       transfer_list);
-               return RUNNING_STATE;
-       }
-
-       return DONE_STATE;
-}
-
-static int map_dma_buffers(struct driver_data *drv_data)
-{
-       struct spi_message *msg;
-       struct device *dev;
-       void *buf;
-
-       drv_data->rx_dma_needs_unmap = 0;
-       drv_data->tx_dma_needs_unmap = 0;
-
-       if (!drv_data->master_info->enable_dma ||
-               !drv_data->cur_chip->enable_dma)
-                       return -1;
-
-       msg = drv_data->cur_msg;
-       dev = &msg->spi->dev;
-       if (msg->is_dma_mapped) {
-               if (drv_data->tx_dma)
-                       /* The caller provided at least dma and cpu virtual
-                          address for write; pump_transfers() will consider the
-                          transfer as write only if cpu rx virtual address is
-                          NULL */
-                       return 0;
-
-               if (drv_data->rx_dma) {
-                       /* The caller provided dma and cpu virtual address to
-                          performe read only transfer -->
-                          use drv_data->dummy_dma_buf for dummy writes to
-                          achive reads */
-                       buf = &drv_data->dummy_dma_buf;
-                       drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf);
-                       drv_data->tx_dma = dma_map_single(dev,
-                                                       buf,
-                                                       drv_data->tx_map_len,
-                                                       DMA_TO_DEVICE);
-                       if (dma_mapping_error(dev, drv_data->tx_dma))
-                               return -1;
-
-                       drv_data->tx_dma_needs_unmap = 1;
-
-                       /* Flags transfer as rd_only for pump_transfers() DMA
-                          regs programming (should be redundant) */
-                       drv_data->tx = NULL;
-
-                       return 0;
-               }
-       }
-
-       if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
-               return -1;
-
-       if (drv_data->tx == NULL) {
-               /* Read only message --> use drv_data->dummy_dma_buf for dummy
-                  writes to achive reads */
-               buf = &drv_data->dummy_dma_buf;
-               drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf);
-       } else {
-               buf = drv_data->tx;
-               drv_data->tx_map_len = drv_data->len;
-       }
-       drv_data->tx_dma = dma_map_single(dev,
-                                       buf,
-                                       drv_data->tx_map_len,
-                                       DMA_TO_DEVICE);
-       if (dma_mapping_error(dev, drv_data->tx_dma))
-               return -1;
-       drv_data->tx_dma_needs_unmap = 1;
-
-       /* NULL rx means write-only transfer and no map needed
-        * since rx DMA will not be used */
-       if (drv_data->rx) {
-               buf = drv_data->rx;
-               drv_data->rx_dma = dma_map_single(dev,
-                                               buf,
-                                               drv_data->len,
-                                               DMA_FROM_DEVICE);
-               if (dma_mapping_error(dev, drv_data->rx_dma)) {
-                       if (drv_data->tx_dma) {
-                               dma_unmap_single(dev,
-                                               drv_data->tx_dma,
-                                               drv_data->tx_map_len,
-                                               DMA_TO_DEVICE);
-                               drv_data->tx_dma_needs_unmap = 0;
-                       }
-                       return -1;
-               }
-               drv_data->rx_dma_needs_unmap = 1;
-       }
-
-       return 0;
-}
-
-static void unmap_dma_buffers(struct driver_data *drv_data)
-{
-       struct spi_message *msg = drv_data->cur_msg;
-       struct device *dev = &msg->spi->dev;
-
-       if (drv_data->rx_dma_needs_unmap) {
-               dma_unmap_single(dev,
-                               drv_data->rx_dma,
-                               drv_data->len,
-                               DMA_FROM_DEVICE);
-               drv_data->rx_dma_needs_unmap = 0;
-       }
-       if (drv_data->tx_dma_needs_unmap) {
-               dma_unmap_single(dev,
-                               drv_data->tx_dma,
-                               drv_data->tx_map_len,
-                               DMA_TO_DEVICE);
-               drv_data->tx_dma_needs_unmap = 0;
-       }
-}
-
-/* Caller already set message->status (dma is already blocked) */
-static void giveback(struct spi_message *message, struct driver_data *drv_data)
-{
-       void __iomem *regs = drv_data->regs;
-
-       /* Bring SPI to sleep; restore_state() and pump_transfer()
-          will do new setup */
-       writel(0, regs + SPI_INT_STATUS);
-       writel(0, regs + SPI_DMA);
-
-       /* Unconditioned deselct */
-       drv_data->cs_control(SPI_CS_DEASSERT);
-
-       message->state = NULL;
-       if (message->complete)
-               message->complete(message->context);
-
-       drv_data->cur_msg = NULL;
-       drv_data->cur_transfer = NULL;
-       drv_data->cur_chip = NULL;
-       queue_work(drv_data->workqueue, &drv_data->work);
-}
-
-static void dma_err_handler(int channel, void *data, int errcode)
-{
-       struct driver_data *drv_data = data;
-       struct spi_message *msg = drv_data->cur_msg;
-
-       dev_dbg(&drv_data->pdev->dev, "dma_err_handler\n");
-
-       /* Disable both rx and tx dma channels */
-       imx_dma_disable(drv_data->rx_channel);
-       imx_dma_disable(drv_data->tx_channel);
-       unmap_dma_buffers(drv_data);
-
-       flush(drv_data);
-
-       msg->state = ERROR_STATE;
-       tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static void dma_tx_handler(int channel, void *data)
-{
-       struct driver_data *drv_data = data;
-
-       dev_dbg(&drv_data->pdev->dev, "dma_tx_handler\n");
-
-       imx_dma_disable(channel);
-
-       /* Now waits for TX FIFO empty */
-       writel(SPI_INTEN_TE, drv_data->regs + SPI_INT_STATUS);
-}
-
-static irqreturn_t dma_transfer(struct driver_data *drv_data)
-{
-       u32 status;
-       struct spi_message *msg = drv_data->cur_msg;
-       void __iomem *regs = drv_data->regs;
-
-       status = readl(regs + SPI_INT_STATUS);
-
-       if ((status & (SPI_INTEN_RO | SPI_STATUS_RO))
-                       == (SPI_INTEN_RO | SPI_STATUS_RO)) {
-               writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
-
-               imx_dma_disable(drv_data->tx_channel);
-               imx_dma_disable(drv_data->rx_channel);
-               unmap_dma_buffers(drv_data);
-
-               flush(drv_data);
-
-               dev_warn(&drv_data->pdev->dev,
-                               "dma_transfer - fifo overun\n");
-
-               msg->state = ERROR_STATE;
-               tasklet_schedule(&drv_data->pump_transfers);
-
-               return IRQ_HANDLED;
-       }
-
-       if (status & SPI_STATUS_TE) {
-               writel(status & ~SPI_INTEN_TE, regs + SPI_INT_STATUS);
-
-               if (drv_data->rx) {
-                       /* Wait end of transfer before read trailing data */
-                       while (readl(regs + SPI_CONTROL) & SPI_CONTROL_XCH)
-                               cpu_relax();
-
-                       imx_dma_disable(drv_data->rx_channel);
-                       unmap_dma_buffers(drv_data);
-
-                       /* Release chip select if requested, transfer delays are
-                          handled in pump_transfers() */
-                       if (drv_data->cs_change)
-                               drv_data->cs_control(SPI_CS_DEASSERT);
-
-                       /* Calculate number of trailing data and read them */
-                       dev_dbg(&drv_data->pdev->dev,
-                               "dma_transfer - test = 0x%08X\n",
-                               readl(regs + SPI_TEST));
-                       drv_data->rx = drv_data->rx_end -
-                                       ((readl(regs + SPI_TEST) &
-                                       SPI_TEST_RXCNT) >>
-                                       SPI_TEST_RXCNT_LSB)*drv_data->n_bytes;
-                       read(drv_data);
-               } else {
-                       /* Write only transfer */
-                       unmap_dma_buffers(drv_data);
-
-                       flush(drv_data);
-               }
-
-               /* End of transfer, update total byte transfered */
-               msg->actual_length += drv_data->len;
-
-               /* Move to next transfer */
-               msg->state = next_transfer(drv_data);
-
-               /* Schedule transfer tasklet */
-               tasklet_schedule(&drv_data->pump_transfers);
-
-               return IRQ_HANDLED;
-       }
-
-       /* Opps problem detected */
-       return IRQ_NONE;
-}
-
-static irqreturn_t interrupt_wronly_transfer(struct driver_data *drv_data)
-{
-       struct spi_message *msg = drv_data->cur_msg;
-       void __iomem *regs = drv_data->regs;
-       u32 status;
-       irqreturn_t handled = IRQ_NONE;
-
-       status = readl(regs + SPI_INT_STATUS);
-
-       if (status & SPI_INTEN_TE) {
-               /* TXFIFO Empty Interrupt on the last transfered word */
-               writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
-               dev_dbg(&drv_data->pdev->dev,
-                       "interrupt_wronly_transfer - end of tx\n");
-
-               flush(drv_data);
-
-               /* Update total byte transfered */
-               msg->actual_length += drv_data->len;
-
-               /* Move to next transfer */
-               msg->state = next_transfer(drv_data);
-
-               /* Schedule transfer tasklet */
-               tasklet_schedule(&drv_data->pump_transfers);
-
-               return IRQ_HANDLED;
-       } else {
-               while (status & SPI_STATUS_TH) {
-                       dev_dbg(&drv_data->pdev->dev,
-                               "interrupt_wronly_transfer - status = 0x%08X\n",
-                               status);
-
-                       /* Pump data */
-                       if (write(drv_data)) {
-                               /* End of TXFIFO writes,
-                                  now wait until TXFIFO is empty */
-                               writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
-                               return IRQ_HANDLED;
-                       }
-
-                       status = readl(regs + SPI_INT_STATUS);
-
-                       /* We did something */
-                       handled = IRQ_HANDLED;
-               }
-       }
-
-       return handled;
-}
-
-static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
-{
-       struct spi_message *msg = drv_data->cur_msg;
-       void __iomem *regs = drv_data->regs;
-       u32 status, control;
-       irqreturn_t handled = IRQ_NONE;
-       unsigned long limit;
-
-       status = readl(regs + SPI_INT_STATUS);
-
-       if (status & SPI_INTEN_TE) {
-               /* TXFIFO Empty Interrupt on the last transfered word */
-               writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
-               dev_dbg(&drv_data->pdev->dev,
-                       "interrupt_transfer - end of tx\n");
-
-               if (msg->state == ERROR_STATE) {
-                       /* RXFIFO overrun was detected and message aborted */
-                       flush(drv_data);
-               } else {
-                       /* Wait for end of transaction */
-                       do {
-                               control = readl(regs + SPI_CONTROL);
-                       } while (control & SPI_CONTROL_XCH);
-
-                       /* Release chip select if requested, transfer delays are
-                          handled in pump_transfers */
-                       if (drv_data->cs_change)
-                               drv_data->cs_control(SPI_CS_DEASSERT);
-
-                       /* Read trailing bytes */
-                       limit = loops_per_jiffy << 1;
-                       while ((read(drv_data) == 0) && --limit)
-                               cpu_relax();
-
-                       if (limit == 0)
-                               dev_err(&drv_data->pdev->dev,
-                                       "interrupt_transfer - "
-                                       "trailing byte read failed\n");
-                       else
-                               dev_dbg(&drv_data->pdev->dev,
-                                       "interrupt_transfer - end of rx\n");
-
-                       /* Update total byte transfered */
-                       msg->actual_length += drv_data->len;
-
-                       /* Move to next transfer */
-                       msg->state = next_transfer(drv_data);
-               }
-
-               /* Schedule transfer tasklet */
-               tasklet_schedule(&drv_data->pump_transfers);
-
-               return IRQ_HANDLED;
-       } else {
-               while (status & (SPI_STATUS_TH | SPI_STATUS_RO)) {
-                       dev_dbg(&drv_data->pdev->dev,
-                               "interrupt_transfer - status = 0x%08X\n",
-                               status);
-
-                       if (status & SPI_STATUS_RO) {
-                               /* RXFIFO overrun, abort message end wait
-                                  until TXFIFO is empty */
-                               writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
-
-                               dev_warn(&drv_data->pdev->dev,
-                                       "interrupt_transfer - fifo overun\n"
-                                       "    data not yet written = %d\n"
-                                       "    data not yet read    = %d\n",
-                                       data_to_write(drv_data),
-                                       data_to_read(drv_data));
-
-                               msg->state = ERROR_STATE;
-
-                               return IRQ_HANDLED;
-                       }
-
-                       /* Pump data */
-                       read(drv_data);
-                       if (write(drv_data)) {
-                               /* End of TXFIFO writes,
-                                  now wait until TXFIFO is empty */
-                               writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
-                               return IRQ_HANDLED;
-                       }
-
-                       status = readl(regs + SPI_INT_STATUS);
-
-                       /* We did something */
-                       handled = IRQ_HANDLED;
-               }
-       }
-
-       return handled;
-}
-
-static irqreturn_t spi_int(int irq, void *dev_id)
-{
-       struct driver_data *drv_data = (struct driver_data *)dev_id;
-
-       if (!drv_data->cur_msg) {
-               dev_err(&drv_data->pdev->dev,
-                       "spi_int - bad message state\n");
-               /* Never fail */
-               return IRQ_HANDLED;
-       }
-
-       return drv_data->transfer_handler(drv_data);
-}
-
-static inline u32 spi_speed_hz(struct driver_data *drv_data, u32 data_rate)
-{
-       return clk_get_rate(drv_data->clk) / (4 << ((data_rate) >> 13));
-}
-
-static u32 spi_data_rate(struct driver_data *drv_data, u32 speed_hz)
-{
-       u32 div;
-       u32 quantized_hz = clk_get_rate(drv_data->clk) >> 2;
-
-       for (div = SPI_PERCLK2_DIV_MIN;
-               div <= SPI_PERCLK2_DIV_MAX;
-               div++, quantized_hz >>= 1) {
-                       if (quantized_hz <= speed_hz)
-                               /* Max available speed LEQ required speed */
-                               return div << 13;
-       }
-       return SPI_CONTROL_DATARATE_BAD;
-}
-
-static void pump_transfers(unsigned long data)
-{
-       struct driver_data *drv_data = (struct driver_data *)data;
-       struct spi_message *message;
-       struct spi_transfer *transfer, *previous;
-       struct chip_data *chip;
-       void __iomem *regs;
-       u32 tmp, control;
-
-       dev_dbg(&drv_data->pdev->dev, "pump_transfer\n");
-
-       message = drv_data->cur_msg;
-
-       /* Handle for abort */
-       if (message->state == ERROR_STATE) {
-               message->status = -EIO;
-               giveback(message, drv_data);
-               return;
-       }
-
-       /* Handle end of message */
-       if (message->state == DONE_STATE) {
-               message->status = 0;
-               giveback(message, drv_data);
-               return;
-       }
-
-       chip = drv_data->cur_chip;
-
-       /* Delay if requested at end of transfer*/
-       transfer = drv_data->cur_transfer;
-       if (message->state == RUNNING_STATE) {
-               previous = list_entry(transfer->transfer_list.prev,
-                                       struct spi_transfer,
-                                       transfer_list);
-               if (previous->delay_usecs)
-                       udelay(previous->delay_usecs);
-       } else {
-               /* START_STATE */
-               message->state = RUNNING_STATE;
-               drv_data->cs_control = chip->cs_control;
-       }
-
-       transfer = drv_data->cur_transfer;
-       drv_data->tx = (void *)transfer->tx_buf;
-       drv_data->tx_end = drv_data->tx + transfer->len;
-       drv_data->rx = transfer->rx_buf;
-       drv_data->rx_end = drv_data->rx + transfer->len;
-       drv_data->rx_dma = transfer->rx_dma;
-       drv_data->tx_dma = transfer->tx_dma;
-       drv_data->len = transfer->len;
-       drv_data->cs_change = transfer->cs_change;
-       drv_data->rd_only = (drv_data->tx == NULL);
-
-       regs = drv_data->regs;
-       control = readl(regs + SPI_CONTROL);
-
-       /* Bits per word setup */
-       tmp = transfer->bits_per_word;
-       if (tmp == 0) {
-               /* Use device setup */
-               tmp = chip->bits_per_word;
-               drv_data->n_bytes = chip->n_bytes;
-       } else
-               /* Use per-transfer setup */
-               drv_data->n_bytes = (tmp <= 8) ? 1 : 2;
-       u32_EDIT(control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1);
-
-       /* Speed setup (surely valid because already checked) */
-       tmp = transfer->speed_hz;
-       if (tmp == 0)
-               tmp = chip->max_speed_hz;
-       tmp = spi_data_rate(drv_data, tmp);
-       u32_EDIT(control, SPI_CONTROL_DATARATE, tmp);
-
-       writel(control, regs + SPI_CONTROL);
-
-       /* Assert device chip-select */
-       drv_data->cs_control(SPI_CS_ASSERT);
-
-       /* DMA cannot read/write SPI FIFOs other than 16 bits at a time; hence
-          if bits_per_word is less or equal 8 PIO transfers are performed.
-          Moreover DMA is convinient for transfer length bigger than FIFOs
-          byte size. */
-       if ((drv_data->n_bytes == 2) &&
-               (drv_data->len > SPI_FIFO_DEPTH*SPI_FIFO_BYTE_WIDTH) &&
-               (map_dma_buffers(drv_data) == 0)) {
-               dev_dbg(&drv_data->pdev->dev,
-                       "pump dma transfer\n"
-                       "    tx      = %p\n"
-                       "    tx_dma  = %08X\n"
-                       "    rx      = %p\n"
-                       "    rx_dma  = %08X\n"
-                       "    len     = %d\n",
-                       drv_data->tx,
-                       (unsigned int)drv_data->tx_dma,
-                       drv_data->rx,
-                       (unsigned int)drv_data->rx_dma,
-                       drv_data->len);
-
-               /* Ensure we have the correct interrupt handler */
-               drv_data->transfer_handler = dma_transfer;
-
-               /* Trigger transfer */
-               writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH,
-                       regs + SPI_CONTROL);
-
-               /* Setup tx DMA */
-               if (drv_data->tx)
-                       /* Linear source address */
-                       CCR(drv_data->tx_channel) =
-                               CCR_DMOD_FIFO |
-                               CCR_SMOD_LINEAR |
-                               CCR_SSIZ_32 | CCR_DSIZ_16 |
-                               CCR_REN;
-               else
-                       /* Read only transfer -> fixed source address for
-                          dummy write to achive read */
-                       CCR(drv_data->tx_channel) =
-                               CCR_DMOD_FIFO |
-                               CCR_SMOD_FIFO |
-                               CCR_SSIZ_32 | CCR_DSIZ_16 |
-                               CCR_REN;
-
-               imx_dma_setup_single(
-                       drv_data->tx_channel,
-                       drv_data->tx_dma,
-                       drv_data->len,
-                       drv_data->rd_data_phys + 4,
-                       DMA_MODE_WRITE);
-
-               if (drv_data->rx) {
-                       /* Setup rx DMA for linear destination address */
-                       CCR(drv_data->rx_channel) =
-                               CCR_DMOD_LINEAR |
-                               CCR_SMOD_FIFO |
-                               CCR_DSIZ_32 | CCR_SSIZ_16 |
-                               CCR_REN;
-                       imx_dma_setup_single(
-                               drv_data->rx_channel,
-                               drv_data->rx_dma,
-                               drv_data->len,
-                               drv_data->rd_data_phys,
-                               DMA_MODE_READ);
-                       imx_dma_enable(drv_data->rx_channel);
-
-                       /* Enable SPI interrupt */
-                       writel(SPI_INTEN_RO, regs + SPI_INT_STATUS);
-
-                       /* Set SPI to request DMA service on both
-                          Rx and Tx half fifo watermark */
-                       writel(SPI_DMA_RHDEN | SPI_DMA_THDEN, regs + SPI_DMA);
-               } else
-                       /* Write only access -> set SPI to request DMA
-                          service on Tx half fifo watermark */
-                       writel(SPI_DMA_THDEN, regs + SPI_DMA);
-
-               imx_dma_enable(drv_data->tx_channel);
-       } else {
-               dev_dbg(&drv_data->pdev->dev,
-                       "pump pio transfer\n"
-                       "    tx      = %p\n"
-                       "    rx      = %p\n"
-                       "    len     = %d\n",
-                       drv_data->tx,
-                       drv_data->rx,
-                       drv_data->len);
-
-               /* Ensure we have the correct interrupt handler */
-               if (drv_data->rx)
-                       drv_data->transfer_handler = interrupt_transfer;
-               else
-                       drv_data->transfer_handler = interrupt_wronly_transfer;
-
-               /* Enable SPI interrupt */
-               if (drv_data->rx)
-                       writel(SPI_INTEN_TH | SPI_INTEN_RO,
-                               regs + SPI_INT_STATUS);
-               else
-                       writel(SPI_INTEN_TH, regs + SPI_INT_STATUS);
-       }
-}
-
-static void pump_messages(struct work_struct *work)
-{
-       struct driver_data *drv_data =
-                               container_of(work, struct driver_data, work);
-       unsigned long flags;
-
-       /* Lock queue and check for queue work */
-       spin_lock_irqsave(&drv_data->lock, flags);
-       if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
-               drv_data->busy = 0;
-               spin_unlock_irqrestore(&drv_data->lock, flags);
-               return;
-       }
-
-       /* Make sure we are not already running a message */
-       if (drv_data->cur_msg) {
-               spin_unlock_irqrestore(&drv_data->lock, flags);
-               return;
-       }
-
-       /* Extract head of queue */
-       drv_data->cur_msg = list_entry(drv_data->queue.next,
-                                       struct spi_message, queue);
-       list_del_init(&drv_data->cur_msg->queue);
-       drv_data->busy = 1;
-       spin_unlock_irqrestore(&drv_data->lock, flags);
-
-       /* Initial message state */
-       drv_data->cur_msg->state = START_STATE;
-       drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
-                                               struct spi_transfer,
-                                               transfer_list);
-
-       /* Setup the SPI using the per chip configuration */
-       drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
-       restore_state(drv_data);
-
-       /* Mark as busy and launch transfers */
-       tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static int transfer(struct spi_device *spi, struct spi_message *msg)
-{
-       struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-       u32 min_speed_hz, max_speed_hz, tmp;
-       struct spi_transfer *trans;
-       unsigned long flags;
-
-       msg->actual_length = 0;
-
-       /* Per transfer setup check */
-       min_speed_hz = spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN);
-       max_speed_hz = spi->max_speed_hz;
-       list_for_each_entry(trans, &msg->transfers, transfer_list) {
-               tmp = trans->bits_per_word;
-               if (tmp > 16) {
-                       dev_err(&drv_data->pdev->dev,
-                               "message rejected : "
-                               "invalid transfer bits_per_word (%d bits)\n",
-                               tmp);
-                       goto msg_rejected;
-               }
-               tmp = trans->speed_hz;
-               if (tmp) {
-                       if (tmp < min_speed_hz) {
-                               dev_err(&drv_data->pdev->dev,
-                                       "message rejected : "
-                                       "device min speed (%d Hz) exceeds "
-                                       "required transfer speed (%d Hz)\n",
-                                       min_speed_hz,
-                                       tmp);
-                               goto msg_rejected;
-                       } else if (tmp > max_speed_hz) {
-                               dev_err(&drv_data->pdev->dev,
-                                       "message rejected : "
-                                       "transfer speed (%d Hz) exceeds "
-                                       "device max speed (%d Hz)\n",
-                                       tmp,
-                                       max_speed_hz);
-                               goto msg_rejected;
-                       }
-               }
-       }
-
-       /* Message accepted */
-       msg->status = -EINPROGRESS;
-       msg->state = START_STATE;
-
-       spin_lock_irqsave(&drv_data->lock, flags);
-       if (drv_data->run == QUEUE_STOPPED) {
-               spin_unlock_irqrestore(&drv_data->lock, flags);
-               return -ESHUTDOWN;
-       }
-
-       list_add_tail(&msg->queue, &drv_data->queue);
-       if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
-               queue_work(drv_data->workqueue, &drv_data->work);
-
-       spin_unlock_irqrestore(&drv_data->lock, flags);
-       return 0;
-
-msg_rejected:
-       /* Message rejected and not queued */
-       msg->status = -EINVAL;
-       msg->state = ERROR_STATE;
-       if (msg->complete)
-               msg->complete(msg->context);
-       return -EINVAL;
-}
-
-/* On first setup bad values must free chip_data memory since will cause
-   spi_new_device to fail. Bad value setup from protocol driver are simply not
-   applied and notified to the calling driver. */
-static int setup(struct spi_device *spi)
-{
-       struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-       struct spi_imx_chip *chip_info;
-       struct chip_data *chip;
-       int first_setup = 0;
-       u32 tmp;
-       int status = 0;
-
-       /* Get controller data */
-       chip_info = spi->controller_data;
-
-       /* Get controller_state */
-       chip = spi_get_ctldata(spi);
-       if (chip == NULL) {
-               first_setup = 1;
-
-               chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
-               if (!chip) {
-                       dev_err(&spi->dev,
-                               "setup - cannot allocate controller state\n");
-                       return -ENOMEM;
-               }
-               chip->control = SPI_DEFAULT_CONTROL;
-
-               if (chip_info == NULL) {
-                       /* spi_board_info.controller_data not is supplied */
-                       chip_info = kzalloc(sizeof(struct spi_imx_chip),
-                                               GFP_KERNEL);
-                       if (!chip_info) {
-                               dev_err(&spi->dev,
-                                       "setup - "
-                                       "cannot allocate controller data\n");
-                               status = -ENOMEM;
-                               goto err_first_setup;
-                       }
-                       /* Set controller data default value */
-                       chip_info->enable_loopback =
-                                               SPI_DEFAULT_ENABLE_LOOPBACK;
-                       chip_info->enable_dma = SPI_DEFAULT_ENABLE_DMA;
-                       chip_info->ins_ss_pulse = 1;
-                       chip_info->bclk_wait = SPI_DEFAULT_PERIOD_WAIT;
-                       chip_info->cs_control = null_cs_control;
-               }
-       }
-
-       /* Now set controller state based on controller data */
-
-       if (first_setup) {
-               /* SPI loopback */
-               if (chip_info->enable_loopback)
-                       chip->test = SPI_TEST_LBC;
-               else
-                       chip->test = 0;
-
-               /* SPI dma driven */
-               chip->enable_dma = chip_info->enable_dma;
-
-               /* SPI /SS pulse between spi burst */
-               if (chip_info->ins_ss_pulse)
-                       u32_EDIT(chip->control,
-                               SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_1);
-               else
-                       u32_EDIT(chip->control,
-                               SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_0);
-
-               /* SPI bclk waits between each bits_per_word spi burst */
-               if (chip_info->bclk_wait > SPI_PERIOD_MAX_WAIT) {
-                       dev_err(&spi->dev,
-                               "setup - "
-                               "bclk_wait exceeds max allowed (%d)\n",
-                               SPI_PERIOD_MAX_WAIT);
-                       goto err_first_setup;
-               }
-               chip->period = SPI_PERIOD_CSRC_BCLK |
-                               (chip_info->bclk_wait & SPI_PERIOD_WAIT);
-       }
-
-       /* SPI mode */
-       tmp = spi->mode;
-       if (tmp & SPI_CS_HIGH) {
-               u32_EDIT(chip->control,
-                               SPI_CONTROL_SSPOL, SPI_CONTROL_SSPOL_ACT_HIGH);
-       }
-       switch (tmp & SPI_MODE_3) {
-       case SPI_MODE_0:
-               tmp = 0;
-               break;
-       case SPI_MODE_1:
-               tmp = SPI_CONTROL_PHA_1;
-               break;
-       case SPI_MODE_2:
-               tmp = SPI_CONTROL_POL_ACT_LOW;
-               break;
-       default:
-               /* SPI_MODE_3 */
-               tmp = SPI_CONTROL_PHA_1 | SPI_CONTROL_POL_ACT_LOW;
-               break;
-       }
-       u32_EDIT(chip->control, SPI_CONTROL_POL | SPI_CONTROL_PHA, tmp);
-
-       /* SPI word width */
-       tmp = spi->bits_per_word;
-       if (tmp > 16) {
-               status = -EINVAL;
-               dev_err(&spi->dev,
-                       "setup - "
-                       "invalid bits_per_word (%d)\n",
-                       tmp);
-               if (first_setup)
-                       goto err_first_setup;
-               else {
-                       /* Undo setup using chip as backup copy */
-                       tmp = chip->bits_per_word;
-                       spi->bits_per_word = tmp;
-               }
-       }
-       chip->bits_per_word = tmp;
-       u32_EDIT(chip->control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1);
-       chip->n_bytes = (tmp <= 8) ? 1 : 2;
-
-       /* SPI datarate */
-       tmp = spi_data_rate(drv_data, spi->max_speed_hz);
-       if (tmp == SPI_CONTROL_DATARATE_BAD) {
-               status = -EINVAL;
-               dev_err(&spi->dev,
-                       "setup - "
-                       "HW min speed (%d Hz) exceeds required "
-                       "max speed (%d Hz)\n",
-                       spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN),
-                       spi->max_speed_hz);
-               if (first_setup)
-                       goto err_first_setup;
-               else
-                       /* Undo setup using chip as backup copy */
-                       spi->max_speed_hz = chip->max_speed_hz;
-       } else {
-               u32_EDIT(chip->control, SPI_CONTROL_DATARATE, tmp);
-               /* Actual rounded max_speed_hz */
-               tmp = spi_speed_hz(drv_data, tmp);
-               spi->max_speed_hz = tmp;
-               chip->max_speed_hz = tmp;
-       }
-
-       /* SPI chip-select management */
-       if (chip_info->cs_control)
-               chip->cs_control = chip_info->cs_control;
-       else
-               chip->cs_control = null_cs_control;
-
-       /* Save controller_state */
-       spi_set_ctldata(spi, chip);
-
-       /* Summary */
-       dev_dbg(&spi->dev,
-               "setup succeded\n"
-               "    loopback enable   = %s\n"
-               "    dma enable        = %s\n"
-               "    insert /ss pulse  = %s\n"
-               "    period wait       = %d\n"
-               "    mode              = %d\n"
-               "    bits per word     = %d\n"
-               "    min speed         = %d Hz\n"
-               "    rounded max speed = %d Hz\n",
-               chip->test & SPI_TEST_LBC ? "Yes" : "No",
-               chip->enable_dma ? "Yes" : "No",
-               chip->control & SPI_CONTROL_SSCTL ? "Yes" : "No",
-               chip->period & SPI_PERIOD_WAIT,
-               spi->mode,
-               spi->bits_per_word,
-               spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN),
-               spi->max_speed_hz);
-       return status;
-
-err_first_setup:
-       kfree(chip);
-       return status;
-}
-
-static void cleanup(struct spi_device *spi)
-{
-       kfree(spi_get_ctldata(spi));
-}
-
-static int __init init_queue(struct driver_data *drv_data)
-{
-       INIT_LIST_HEAD(&drv_data->queue);
-       spin_lock_init(&drv_data->lock);
-
-       drv_data->run = QUEUE_STOPPED;
-       drv_data->busy = 0;
-
-       tasklet_init(&drv_data->pump_transfers,
-                       pump_transfers, (unsigned long)drv_data);
-
-       INIT_WORK(&drv_data->work, pump_messages);
-       drv_data->workqueue = create_singlethread_workqueue(
-                               dev_name(drv_data->master->dev.parent));
-       if (drv_data->workqueue == NULL)
-               return -EBUSY;
-
-       return 0;
-}
-
-static int start_queue(struct driver_data *drv_data)
-{
-       unsigned long flags;
-
-       spin_lock_irqsave(&drv_data->lock, flags);
-
-       if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
-               spin_unlock_irqrestore(&drv_data->lock, flags);
-               return -EBUSY;
-       }
-
-       drv_data->run = QUEUE_RUNNING;
-       drv_data->cur_msg = NULL;
-       drv_data->cur_transfer = NULL;
-       drv_data->cur_chip = NULL;
-       spin_unlock_irqrestore(&drv_data->lock, flags);
-
-       queue_work(drv_data->workqueue, &drv_data->work);
-
-       return 0;
-}
-
-static int stop_queue(struct driver_data *drv_data)
-{
-       unsigned long flags;
-       unsigned limit = 500;
-       int status = 0;
-
-       spin_lock_irqsave(&drv_data->lock, flags);
-
-       /* This is a bit lame, but is optimized for the common execution path.
-        * A wait_queue on the drv_data->busy could be used, but then the common
-        * execution path (pump_messages) would be required to call wake_up or
-        * friends on every SPI message. Do this instead */
-       drv_data->run = QUEUE_STOPPED;
-       while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
-               spin_unlock_irqrestore(&drv_data->lock, flags);
-               msleep(10);
-               spin_lock_irqsave(&drv_data->lock, flags);
-       }
-
-       if (!list_empty(&drv_data->queue) || drv_data->busy)
-               status = -EBUSY;
-
-       spin_unlock_irqrestore(&drv_data->lock, flags);
-
-       return status;
-}
-
-static int destroy_queue(struct driver_data *drv_data)
-{
-       int status;
-
-       status = stop_queue(drv_data);
-       if (status != 0)
-               return status;
-
-       if (drv_data->workqueue)
-               destroy_workqueue(drv_data->workqueue);
-
-       return 0;
-}
-
-static int __init spi_imx_probe(struct platform_device *pdev)
-{
-       struct device *dev = &pdev->dev;
-       struct spi_imx_master *platform_info;
-       struct spi_master *master;
-       struct driver_data *drv_data;
-       struct resource *res;
-       int irq, status = 0;
-
-       platform_info = dev->platform_data;
-       if (platform_info == NULL) {
-               dev_err(&pdev->dev, "probe - no platform data supplied\n");
-               status = -ENODEV;
-               goto err_no_pdata;
-       }
-
-       /* Allocate master with space for drv_data */
-       master = spi_alloc_master(dev, sizeof(struct driver_data));
-       if (!master) {
-               dev_err(&pdev->dev, "probe - cannot alloc spi_master\n");
-               status = -ENOMEM;
-               goto err_no_mem;
-       }
-       drv_data = spi_master_get_devdata(master);
-       drv_data->master = master;
-       drv_data->master_info = platform_info;
-       drv_data->pdev = pdev;
-
-       /* the spi->mode bits understood by this driver: */
-       master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-
-       master->bus_num = pdev->id;
-       master->num_chipselect = platform_info->num_chipselect;
-       master->dma_alignment = DMA_ALIGNMENT;
-       master->cleanup = cleanup;
-       master->setup = setup;
-       master->transfer = transfer;
-
-       drv_data->dummy_dma_buf = SPI_DUMMY_u32;
-
-       drv_data->clk = clk_get(&pdev->dev, "perclk2");
-       if (IS_ERR(drv_data->clk)) {
-               dev_err(&pdev->dev, "probe - cannot get clock\n");
-               status = PTR_ERR(drv_data->clk);
-               goto err_no_clk;
-       }
-       clk_enable(drv_data->clk);
-
-       /* Find and map resources */
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(&pdev->dev, "probe - MEM resources not defined\n");
-               status = -ENODEV;
-               goto err_no_iores;
-       }
-       drv_data->ioarea = request_mem_region(res->start,
-                                               res->end - res->start + 1,
-                                               pdev->name);
-       if (drv_data->ioarea == NULL) {
-               dev_err(&pdev->dev, "probe - cannot reserve region\n");
-               status = -ENXIO;
-               goto err_no_iores;
-       }
-       drv_data->regs = ioremap(res->start, res->end - res->start + 1);
-       if (drv_data->regs == NULL) {
-               dev_err(&pdev->dev, "probe - cannot map IO\n");
-               status = -ENXIO;
-               goto err_no_iomap;
-       }
-       drv_data->rd_data_phys = (dma_addr_t)res->start;
-
-       /* Attach to IRQ */
-       irq = platform_get_irq(pdev, 0);
-       if (irq < 0) {
-               dev_err(&pdev->dev, "probe - IRQ resource not defined\n");
-               status = -ENODEV;
-               goto err_no_irqres;
-       }
-       status = request_irq(irq, spi_int, IRQF_DISABLED,
-                            dev_name(dev), drv_data);
-       if (status < 0) {
-               dev_err(&pdev->dev, "probe - cannot get IRQ (%d)\n", status);
-               goto err_no_irqres;
-       }
-
-       /* Setup DMA if requested */
-       drv_data->tx_channel = -1;
-       drv_data->rx_channel = -1;
-       if (platform_info->enable_dma) {
-               /* Get rx DMA channel */
-               drv_data->rx_channel = imx_dma_request_by_prio("spi_imx_rx",
-                                                              DMA_PRIO_HIGH);
-               if (drv_data->rx_channel < 0) {
-                       dev_err(dev,
-                               "probe - problem (%d) requesting rx channel\n",
-                               drv_data->rx_channel);
-                       goto err_no_rxdma;
-               } else
-                       imx_dma_setup_handlers(drv_data->rx_channel, NULL,
-                                               dma_err_handler, drv_data);
-
-               /* Get tx DMA channel */
-               drv_data->tx_channel = imx_dma_request_by_prio("spi_imx_tx",
-                                                              DMA_PRIO_MEDIUM);
-               if (drv_data->tx_channel < 0) {
-                       dev_err(dev,
-                               "probe - problem (%d) requesting tx channel\n",
-                               drv_data->tx_channel);
-                       imx_dma_free(drv_data->rx_channel);
-                       goto err_no_txdma;
-               } else
-                       imx_dma_setup_handlers(drv_data->tx_channel,
-                                               dma_tx_handler, dma_err_handler,
-                                               drv_data);
-
-               /* Set request source and burst length for allocated channels */
-               switch (drv_data->pdev->id) {
-               case 1:
-                       /* Using SPI1 */
-                       RSSR(drv_data->rx_channel) = DMA_REQ_SPI1_R;
-                       RSSR(drv_data->tx_channel) = DMA_REQ_SPI1_T;
-                       break;
-               case 2:
-                       /* Using SPI2 */
-                       RSSR(drv_data->rx_channel) = DMA_REQ_SPI2_R;
-                       RSSR(drv_data->tx_channel) = DMA_REQ_SPI2_T;
-                       break;
-               default:
-                       dev_err(dev, "probe - bad SPI Id\n");
-                       imx_dma_free(drv_data->rx_channel);
-                       imx_dma_free(drv_data->tx_channel);
-                       status = -ENODEV;
-                       goto err_no_devid;
-               }
-               BLR(drv_data->rx_channel) = SPI_DMA_BLR;
-               BLR(drv_data->tx_channel) = SPI_DMA_BLR;
-       }
-
-       /* Load default SPI configuration */
-       writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
-       writel(0, drv_data->regs + SPI_RESET);
-       writel(SPI_DEFAULT_CONTROL, drv_data->regs + SPI_CONTROL);
-
-       /* Initial and start queue */
-       status = init_queue(drv_data);
-       if (status != 0) {
-               dev_err(&pdev->dev, "probe - problem initializing queue\n");
-               goto err_init_queue;
-       }
-       status = start_queue(drv_data);
-       if (status != 0) {
-               dev_err(&pdev->dev, "probe - problem starting queue\n");
-               goto err_start_queue;
-       }
-
-       /* Register with the SPI framework */
-       platform_set_drvdata(pdev, drv_data);
-       status = spi_register_master(master);
-       if (status != 0) {
-               dev_err(&pdev->dev, "probe - problem registering spi master\n");
-               goto err_spi_register;
-       }
-
-       dev_dbg(dev, "probe succeded\n");
-       return 0;
-
-err_init_queue:
-err_start_queue:
-err_spi_register:
-       destroy_queue(drv_data);
-
-err_no_rxdma:
-err_no_txdma:
-err_no_devid:
-       free_irq(irq, drv_data);
-
-err_no_irqres:
-       iounmap(drv_data->regs);
-
-err_no_iomap:
-       release_resource(drv_data->ioarea);
-       kfree(drv_data->ioarea);
-
-err_no_iores:
-       clk_disable(drv_data->clk);
-       clk_put(drv_data->clk);
-
-err_no_clk:
-       spi_master_put(master);
-
-err_no_pdata:
-err_no_mem:
-       return status;
-}
-
-static int __exit spi_imx_remove(struct platform_device *pdev)
-{
-       struct driver_data *drv_data = platform_get_drvdata(pdev);
-       int irq;
-       int status = 0;
-
-       if (!drv_data)
-               return 0;
-
-       tasklet_kill(&drv_data->pump_transfers);
-
-       /* Remove the queue */
-       status = destroy_queue(drv_data);
-       if (status != 0) {
-               dev_err(&pdev->dev, "queue remove failed (%d)\n", status);
-               return status;
-       }
-
-       /* Reset SPI */
-       writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
-       writel(0, drv_data->regs + SPI_RESET);
-
-       /* Release DMA */
-       if (drv_data->master_info->enable_dma) {
-               RSSR(drv_data->rx_channel) = 0;
-               RSSR(drv_data->tx_channel) = 0;
-               imx_dma_free(drv_data->tx_channel);
-               imx_dma_free(drv_data->rx_channel);
-       }
-
-       /* Release IRQ */
-       irq = platform_get_irq(pdev, 0);
-       if (irq >= 0)
-               free_irq(irq, drv_data);
-
-       clk_disable(drv_data->clk);
-       clk_put(drv_data->clk);
-
-       /* Release map resources */
-       iounmap(drv_data->regs);
-       release_resource(drv_data->ioarea);
-       kfree(drv_data->ioarea);
-
-       /* Disconnect from the SPI framework */
-       spi_unregister_master(drv_data->master);
-       spi_master_put(drv_data->master);
-
-       /* Prevent double remove */
-       platform_set_drvdata(pdev, NULL);
-
-       dev_dbg(&pdev->dev, "remove succeded\n");
-
-       return 0;
-}
-
-static void spi_imx_shutdown(struct platform_device *pdev)
-{
-       struct driver_data *drv_data = platform_get_drvdata(pdev);
-
-       /* Reset SPI */
-       writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
-       writel(0, drv_data->regs + SPI_RESET);
-
-       dev_dbg(&pdev->dev, "shutdown succeded\n");
-}
-
-#ifdef CONFIG_PM
-
-static int spi_imx_suspend(struct platform_device *pdev, pm_message_t state)
-{
-       struct driver_data *drv_data = platform_get_drvdata(pdev);
-       int status = 0;
-
-       status = stop_queue(drv_data);
-       if (status != 0) {
-               dev_warn(&pdev->dev, "suspend cannot stop queue\n");
-               return status;
-       }
-
-       dev_dbg(&pdev->dev, "suspended\n");
-
-       return 0;
-}
-
-static int spi_imx_resume(struct platform_device *pdev)
-{
-       struct driver_data *drv_data = platform_get_drvdata(pdev);
-       int status = 0;
-
-       /* Start the queue running */
-       status = start_queue(drv_data);
-       if (status != 0)
-               dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
-       else
-               dev_dbg(&pdev->dev, "resumed\n");
-
-       return status;
-}
-#else
-#define spi_imx_suspend NULL
-#define spi_imx_resume NULL
-#endif /* CONFIG_PM */
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:spi_imx");
-
-static struct platform_driver driver = {
-       .driver = {
-               .name = "spi_imx",
-               .owner = THIS_MODULE,
-       },
-       .remove = __exit_p(spi_imx_remove),
-       .shutdown = spi_imx_shutdown,
-       .suspend = spi_imx_suspend,
-       .resume = spi_imx_resume,
-};
-
-static int __init spi_imx_init(void)
-{
-       return platform_driver_probe(&driver, spi_imx_probe);
-}
-module_init(spi_imx_init);
-
-static void __exit spi_imx_exit(void)
-{
-       platform_driver_unregister(&driver);
-}
-module_exit(spi_imx_exit);
-
-MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>");
-MODULE_DESCRIPTION("iMX SPI Controller Driver");
-MODULE_LICENSE("GPL");