hwmon: (lm90) Define status bits
authorWei Ni <wni@nvidia.com>
Fri, 15 Nov 2013 09:40:38 +0000 (10:40 +0100)
committerJean Delvare <khali@endymion.delvare>
Fri, 15 Nov 2013 09:40:38 +0000 (10:40 +0100)
Add bit defines for the status register. And add a function
lm90_is_tripped() which will read status register and return
tripped or not, then lm90_alert can call it directly, and in the
future the IRQ thread also can use it.

[JD: Adjusted to include all the new MAX6696 status flags.]

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
drivers/hwmon/lm90.c

index 14e36c114d611e63203a82ed022d5c303cfde39a..5e414ca80a7848cfbef7a5608929e62404850c17 100644 (file)
@@ -179,6 +179,23 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 #define LM90_HAVE_TEMP3                (1 << 6) /* 3rd temperature sensor      */
 #define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert                */
 
+/* LM90 status */
+#define LM90_STATUS_LTHRM      (1 << 0) /* local THERM limit tripped */
+#define LM90_STATUS_RTHRM      (1 << 1) /* remote THERM limit tripped */
+#define LM90_STATUS_ROPEN      (1 << 2) /* remote is an open circuit */
+#define LM90_STATUS_RLOW       (1 << 3) /* remote low temp limit tripped */
+#define LM90_STATUS_RHIGH      (1 << 4) /* remote high temp limit tripped */
+#define LM90_STATUS_LLOW       (1 << 5) /* local low temp limit tripped */
+#define LM90_STATUS_LHIGH      (1 << 6) /* local high temp limit tripped */
+
+#define MAX6696_STATUS2_R2THRM (1 << 1) /* remote2 THERM limit tripped */
+#define MAX6696_STATUS2_R2OPEN (1 << 2) /* remote2 is an open circuit */
+#define MAX6696_STATUS2_R2LOW  (1 << 3) /* remote2 low temp limit tripped */
+#define MAX6696_STATUS2_R2HIGH (1 << 4) /* remote2 high temp limit tripped */
+#define MAX6696_STATUS2_ROT2   (1 << 5) /* remote emergency limit tripped */
+#define MAX6696_STATUS2_R2OT2  (1 << 6) /* remote2 emergency limit tripped */
+#define MAX6696_STATUS2_LOT2   (1 << 7) /* local emergency limit tripped */
+
 /*
  * Driver data (common to all clients)
  */
@@ -1391,6 +1408,43 @@ static void lm90_init_client(struct i2c_client *client)
                i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
 }
 
+static bool lm90_is_tripped(struct i2c_client *client, u16 *status)
+{
+       struct lm90_data *data = i2c_get_clientdata(client);
+       u8 st, st2 = 0;
+
+       lm90_read_reg(client, LM90_REG_R_STATUS, &st);
+
+       if (data->kind == max6696)
+               lm90_read_reg(client, MAX6696_REG_R_STATUS2, &st2);
+
+       *status = st | (st2 << 8);
+
+       if ((st & 0x7f) == 0 && (st2 & 0xfe) == 0)
+               return false;
+
+       if ((st & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH | LM90_STATUS_LTHRM)) ||
+           (st2 & MAX6696_STATUS2_LOT2))
+               dev_warn(&client->dev,
+                        "temp%d out of range, please check!\n", 1);
+       if ((st & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH | LM90_STATUS_RTHRM)) ||
+           (st2 & MAX6696_STATUS2_ROT2))
+               dev_warn(&client->dev,
+                        "temp%d out of range, please check!\n", 2);
+       if (st & LM90_STATUS_ROPEN)
+               dev_warn(&client->dev,
+                        "temp%d diode open, please check!\n", 2);
+       if (st2 & (MAX6696_STATUS2_R2LOW | MAX6696_STATUS2_R2HIGH |
+                  MAX6696_STATUS2_R2THRM | MAX6696_STATUS2_R2OT2))
+               dev_warn(&client->dev,
+                        "temp%d out of range, please check!\n", 3);
+       if (st2 & MAX6696_STATUS2_R2OPEN)
+               dev_warn(&client->dev,
+                        "temp%d diode open, please check!\n", 3);
+
+       return true;
+}
+
 static int lm90_probe(struct i2c_client *client,
                      const struct i2c_device_id *id)
 {
@@ -1489,46 +1543,26 @@ static int lm90_remove(struct i2c_client *client)
 
 static void lm90_alert(struct i2c_client *client, unsigned int flag)
 {
-       struct lm90_data *data = i2c_get_clientdata(client);
-       u8 config, alarms, alarms2 = 0;
-
-       lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
-
-       if (data->kind == max6696)
-               lm90_read_reg(client, MAX6696_REG_R_STATUS2, &alarms2);
-
-       if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) {
-               dev_info(&client->dev, "Everything OK\n");
-       } else {
-               if ((alarms & 0x61) || (alarms2 & 0x80))
-                       dev_warn(&client->dev,
-                                "temp%d out of range, please check!\n", 1);
-               if ((alarms & 0x1a) || (alarms2 & 0x20))
-                       dev_warn(&client->dev,
-                                "temp%d out of range, please check!\n", 2);
-               if (alarms & 0x04)
-                       dev_warn(&client->dev,
-                                "temp%d diode open, please check!\n", 2);
-
-               if (alarms2 & 0x5a)
-                       dev_warn(&client->dev,
-                                "temp%d out of range, please check!\n", 3);
-               if (alarms2 & 0x04)
-                       dev_warn(&client->dev,
-                                "temp%d diode open, please check!\n", 3);
+       u16 alarms;
 
+       if (lm90_is_tripped(client, &alarms)) {
                /*
                 * Disable ALERT# output, because these chips don't implement
                 * SMBus alert correctly; they should only hold the alert line
                 * low briefly.
                 */
+               struct lm90_data *data = i2c_get_clientdata(client);
+
                if ((data->flags & LM90_HAVE_BROKEN_ALERT)
                 && (alarms & data->alert_alarms)) {
+                       u8 config;
                        dev_dbg(&client->dev, "Disabling ALERT#\n");
                        lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
                        i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
                                                  config | 0x80);
                }
+       } else {
+               dev_info(&client->dev, "Everything OK\n");
        }
 }