e1000: fix VR powerdown code
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>
Wed, 1 Nov 2006 16:47:44 +0000 (08:47 -0800)
committerJeff Garzik <jeff@garzik.org>
Sat, 2 Dec 2006 05:11:59 +0000 (00:11 -0500)
On ich systems during PHY power down to D3, the voltage regulators
were left on.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/e1000/e1000_hw.c
drivers/net/e1000/e1000_hw.h

index 29e6f6aba9e2e9d9c1271aa70a1791cdf17796af..0e2ccf50d4d7c2fc13a7eddf571f0896117b2ccb 100644 (file)
@@ -3942,14 +3942,15 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw)
         E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
                         E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
 
-        /* Write VR power-down enable */
+        /* Write VR power-down enable - bits 9:8 should be 10b */
         e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
-        e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data |
-                            IGP3_VR_CTRL_MODE_SHUT);
+        phy_data |= (1 << 9);
+        phy_data &= ~(1 << 8);
+        e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data);
 
         /* Read it back and test */
         e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
-        if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry)
+        if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry)
             break;
 
         /* Issue PHY reset and repeat at most one more time */
index b32a0c3cfd10cbd36e89a5888312e46ac33aabec..31bea32158417cfcee03f93269294e57f8970b31 100644 (file)
@@ -3173,6 +3173,7 @@ struct e1000_host_command_info {
 #define IGP3_VR_CTRL \
         PHY_REG(776, 18) /* Voltage regulator control register */
 #define IGP3_VR_CTRL_MODE_SHUT       0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK       0x0300 /* Shutdown VR Mask */
 
 #define IGP3_CAPABILITY \
         PHY_REG(776, 19) /* IGP3 Capability Register */