*
* This driver programs the PCX-U/PCX-W performance counters
* on the PA-RISC 2.0 chips. The driver keeps all images now
- * internally to the kernel to hopefully eliminate the possiblity
+ * internally to the kernel to hopefully eliminate the possibility
* of a bad image halting the CPU. Also, there are different
* images for the PCX-W and later chips vs the PCX-U chips.
*
#ifdef CONFIG_PPC64
/*
- * Fill up the "systemcfg" stuff for backward compatiblity
+ * Fill up the "systemcfg" stuff for backward compatibility
*/
strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64");
vdso_data->version.major = SYSTEMCFG_MAJOR;
* There is no debug setup required for the cycles event.
* Note that only events in the same group can be used.
* Otherwise, there will be conflicts in correctly routing
- * the signals on the debug bus. It is the responsiblity
+ * the signals on the debug bus. It is the responsibility
* of the OProfile user tool to check the events are in
* the same group.
*/
* For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
* we need to carefully set the bits when the user does not get the
* desired speed. We allow small margins and preserve as much of possible
- * of the input intent to keep compatiblity.
+ * of the input intent to keep compatibility.
*
* Locking: Caller should hold termios lock. This is already held
* when calling this function from the driver termios handler.
*(__be32 *)(p + 4) = cpu_to_be32(CISCO_SLARP_KEEPALIVE);
*(__be32 *)(p + 8) = cpu_to_be32(lp->cisco_myseq);
*(__be32 *)(p + 12) = cpu_to_be32(lp->cisco_yourseq);
- *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliablity, always 0xffff
+ *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliability, always 0xffff
p += 18;
isdn_net_write_super(lp, skb);
goto bad_cipher;
}
- /* Compatiblity mode for old dm-crypt cipher strings */
+ /* Compatibility mode for old dm-crypt cipher strings */
if (!chainmode || (strcmp(chainmode, "plain") == 0 && !ivmode)) {
chainmode = "cbc";
ivmode = "plain";
return ret;
}
- /* binary compatiblity cruft */
+ /* binary compatibility cruft */
case __NET_ADD_IF_OLD:
{
struct __dvb_net_if_old *dvbnetif = parg;
*
* Change by Mike Sullivan et al.:
* + added turbo card support. No need to use lanaid to configure
- * the adapter into isa compatiblity mode.
+ * the adapter into isa compatibility mode.
*
* Changes by Burt Silverman to allow the computer to behave nicely when
* a cable is pulled or not in place, or a PCMCIA card is removed hot.
#define DEFAULT_PDR(pid) default_pdr_data_##pid
-/* HWIF Compatiblity */
+/* HWIF Compatibility */
DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
/* PPPPSign */
record_id + 1, pdi);
}
break;
- case 0x5: /* HWIF Compatiblity */
+ case 0x5: /* HWIF Compatibility */
default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
break;
case 0x108: /* PPPPSign */
break;
case TW_IOCTL_GET_COMPATIBILITY_INFO:
tw_ioctl->driver_command.status = 0;
- /* Copy compatiblity struct into ioctl data buffer */
+ /* Copy compatibility struct into ioctl data buffer */
tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
break;
Copyright (C) 1999-2009 3ware Inc.
- Kernel compatiblity By: Andre Hedrick <andre@suse.com>
+ Kernel compatibility By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
Further tiny build fixes and trivial hoovering Alan Cox
nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
/*
* TODO: To be implemented improving bus master
- * transfer reliablity when BMCNTERR is occurred in
+ * transfer reliability when BMCNTERR is occurred in
* AutoSCSI phase described in specification.
*/
}
* 0xff is invalid, so they must not be used. Initialization
* fills up those two in the bitmap so they are not allocated.
*
- * We spread the allocation around to reduce the posiblity of two
+ * We spread the allocation around to reduce the possibility of two
* consecutive opened @neh's getting the same context ID assigned (to
* avoid surprises with late events that timed out long time ago). So
* first we search from where @rc->ctx_roll is, if not found, we
goto errout;
/* compat_mode being true specifies a call that is supposed
- * to add additional backward compatiblity statistic TLVs.
+ * to add additional backward compatibility statistic TLVs.
*/
if (compat_mode) {
if (a->type == TCA_OLD_COMPAT)
* inputs) are fed from Xilinx.
*
* I even checked traces on board and coded a support in driver for
- * an alternative possiblity - the unused I2S ICE output channels
+ * an alternative possibility - the unused I2S ICE output channels
* switched to HW-IN/SPDIF-IN and providing the monitoring signal to
* the DAC - to no avail. The I2S outputs seem to be unconnected.
*