ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode

Without that, regulators are left in the mode last set by the bootloader or
by the kernel the device was rebooted from. This leads to various problems,
like non-working peripherals.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index b3c26a96a7262bdc2356060f900cc9b0c8bbd8eb..d9e2d9c6e999e4aa6f3a4c8f582fe9caf74953f4 100644 (file)
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -329,6 +329,7 @@
        regulator-name = "V28";
        regulator-min-microvolt = <2800000>;
        regulator-max-microvolt = <2800000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
        regulator-always-on; /* due to battery cover sensor */
 };
 
@@ -336,30 +337,35 @@
        regulator-name = "VCSI";
        regulator-min-microvolt = <1800000>;
        regulator-max-microvolt = <1800000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux3 {
        regulator-name = "VMMC2_30";
        regulator-min-microvolt = <2800000>;
        regulator-max-microvolt = <3000000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux4 {
        regulator-name = "VCAM_ANA_28";
        regulator-min-microvolt = <2800000>;
        regulator-max-microvolt = <2800000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc1 {
        regulator-name = "VMMC1";
        regulator-min-microvolt = <1850000>;
        regulator-max-microvolt = <3150000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc2 {
        regulator-name = "V28_A";
        regulator-min-microvolt = <2800000>;
        regulator-max-microvolt = <3000000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
        regulator-always-on; /* due VIO leak to AIC34 VDDs */
 };
 
@@ -367,6 +373,7 @@
        regulator-name = "VPLL";
        regulator-min-microvolt = <1800000>;
        regulator-max-microvolt = <1800000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
        regulator-always-on;
 };
 
@@ -374,6 +381,7 @@
        regulator-name = "VSDI_CSI";
        regulator-min-microvolt = <1800000>;
        regulator-max-microvolt = <1800000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
        regulator-always-on;
 };
 
@@ -381,6 +389,7 @@
        regulator-name = "VMMC2_IO_18";
        regulator-min-microvolt = <1800000>;
        regulator-max-microvolt = <1800000>;
+       regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vio {