#if defined(CONFIG_ARN5206)
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_ADDRSIZE 0x00020000
#define NE2000_IRQ_VECTOR 0xf0
#define NE2000_IRQ_PRIORITY 2
#define NE2000_IRQ_LEVEL 4
#if defined(CONFIG_M5206eC3)
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_ADDRSIZE 0x00020000
#define NE2000_IRQ_VECTOR 0x1c
#define NE2000_IRQ_PRIORITY 2
#define NE2000_IRQ_LEVEL 4
#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
#define NE2000_ADDR 0x30000300
+#define NE2000_ADDRSIZE 0x00001000
#define NE2000_IRQ_VECTOR 25
#define NE2000_IRQ_PRIORITY 1
#define NE2000_IRQ_LEVEL 3
#if defined(CONFIG_M5307C3)
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_ADDRSIZE 0x00020000
#define NE2000_IRQ_VECTOR 0x1b
#define NE2000_BYTE volatile unsigned short
#endif
#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
#define NE2000_ADDR 0x30600300
#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_ADDRSIZE 0x00010000
#define NE2000_IRQ_VECTOR 67
#undef BSWAP
#define BSWAP(w) (w)
#define NE2000_ADDR0 0x30600300
#define NE2000_ADDR1 0x30800300
#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_ADDRSIZE 0x00010000
#define NE2000_IRQ_VECTOR0 27
#define NE2000_IRQ_VECTOR1 29
#undef BSWAP
#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
#define NE2000_ADDR 0x30600300
#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_ADDRSIZE 0x00010000
#define NE2000_IRQ_VECTOR 27
#undef BSWAP
#define BSWAP(w) (w)
#if defined(CONFIG_ARN5307)
#define NE2000_ADDR 0xfe600300
#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_ADDRSIZE 0x00020000
#define NE2000_IRQ_VECTOR 0x1b
#define NE2000_IRQ_PRIORITY 2
#define NE2000_IRQ_LEVEL 3
#if defined(CONFIG_M5407C3)
#define NE2000_ADDR 0x40000300
#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_ADDRSIZE 0x00020000
#define NE2000_IRQ_VECTOR 0x1b
#define NE2000_BYTE volatile unsigned short
#endif
-/****************************************************************************/
-
-/*
- * Side-band address space for odd address requires re-mapping
- * many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define outb ne2000_outb
-#define inb ne2000_inb
-#define outb_p ne2000_outb
-#define inb_p ne2000_inb
-#define outsb ne2000_outsb
-#define outsw ne2000_outsw
-#define insb ne2000_insb
-#define insw ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- * This macro converts a conventional register address into the
- * real memory pointer of the mapped NE2000 device.
- * On most NE2000 implementations on ColdFire boards the chip is
- * mapped in kinda funny, due to its ISA heritage.
- */
-#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define NE2000_DATA_PTR(addr) (addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
- NE2000_BYTE *rp;
-
- rp = (NE2000_BYTE *) NE2000_PTR(addr);
- *rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
- NE2000_BYTE *rp, val;
-
- rp = (NE2000_BYTE *) NE2000_PTR(addr);
- val = *rp;
- return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
- NE2000_BYTE *rp, val;
- unsigned char *buf;
-
- buf = (unsigned char *) vbuf;
- rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- val = *rp;
- *buf++ = RSWAP(val);
- }
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short w, *buf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- w = *rp;
- *buf++ = BSWAP(w);
- }
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
- NE2000_BYTE *rp, val;
- unsigned char *buf;
-
- buf = (unsigned char *) vbuf;
- rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- val = *buf++;
- *rp = RSWAP(val);
- }
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short w, *buf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- w = *buf++;
- *rp = BSWAP(w);
- }
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
/****************************************************************************/
#endif /* mcf8390_h */
--- /dev/null
+/*
+ * Support for ColdFire CPU based boards using a NS8390 Ethernet device.
+ *
+ * Derived from the many other 8390 drivers.
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of the Linux
+ * distribution for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <asm/mcf8390.h>
+
+static const char version[] =
+ "mcf8390.c: (15-06-2012) Greg Ungerer <gerg@uclinux.org>";
+
+#define NE_CMD 0x00
+#define NE_DATAPORT 0x10 /* NatSemi-defined port window offset */
+#define NE_RESET 0x1f /* Issue a read to reset ,a write to clear */
+#define NE_EN0_ISR 0x07
+#define NE_EN0_DCFG 0x0e
+#define NE_EN0_RSARLO 0x08
+#define NE_EN0_RSARHI 0x09
+#define NE_EN0_RCNTLO 0x0a
+#define NE_EN0_RXCR 0x0c
+#define NE_EN0_TXCR 0x0d
+#define NE_EN0_RCNTHI 0x0b
+#define NE_EN0_IMR 0x0f
+
+#define NESM_START_PG 0x40 /* First page of TX buffer */
+#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
+
+#ifdef NE2000_ODDOFFSET
+/*
+ * A lot of the ColdFire boards use a separate address region for odd offset
+ * register addresses. The following functions convert and map as required.
+ * Note that the data port accesses are treated a little differently, and
+ * always accessed via the insX/outsX functions.
+ */
+static inline u32 NE_PTR(u32 addr)
+{
+ if (addr & 1)
+ return addr - 1 + NE2000_ODDOFFSET;
+ return addr;
+}
+
+static inline u32 NE_DATA_PTR(u32 addr)
+{
+ return addr;
+}
+
+void ei_outb(u32 val, u32 addr)
+{
+ NE2000_BYTE *rp;
+
+ rp = (NE2000_BYTE *) NE_PTR(addr);
+ *rp = RSWAP(val);
+}
+
+#define ei_inb ei_inb
+u8 ei_inb(u32 addr)
+{
+ NE2000_BYTE *rp, val;
+
+ rp = (NE2000_BYTE *) NE_PTR(addr);
+ val = *rp;
+ return (u8) (RSWAP(val) & 0xff);
+}
+
+void ei_insb(u32 addr, void *vbuf, int len)
+{
+ NE2000_BYTE *rp, val;
+ u8 *buf;
+
+ buf = (u8 *) vbuf;
+ rp = (NE2000_BYTE *) NE_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ val = *rp;
+ *buf++ = RSWAP(val);
+ }
+}
+
+void ei_insw(u32 addr, void *vbuf, int len)
+{
+ volatile u16 *rp;
+ u16 w, *buf;
+
+ buf = (u16 *) vbuf;
+ rp = (volatile u16 *) NE_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ w = *rp;
+ *buf++ = BSWAP(w);
+ }
+}
+
+void ei_outsb(u32 addr, const void *vbuf, int len)
+{
+ NE2000_BYTE *rp, val;
+ u8 *buf;
+
+ buf = (u8 *) vbuf;
+ rp = (NE2000_BYTE *) NE_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ val = *buf++;
+ *rp = RSWAP(val);
+ }
+}
+
+void ei_outsw(u32 addr, const void *vbuf, int len)
+{
+ volatile u16 *rp;
+ u16 w, *buf;
+
+ buf = (u16 *) vbuf;
+ rp = (volatile u16 *) NE_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ w = *buf++;
+ *rp = BSWAP(w);
+ }
+}
+
+#else /* !NE2000_ODDOFFSET */
+
+#define ei_inb inb
+#define ei_outb outb
+#define ei_insb insb
+#define ei_insw insw
+#define ei_outsb outsb
+#define ei_outsw outsw
+
+#endif /* !NE2000_ODDOFFSET */
+
+#define ei_inb_p ei_inb
+#define ei_outb_p ei_outb
+
+#include "lib8390.c"
+
+/*
+ * Hard reset the card. This used to pause for the same period that a
+ * 8390 reset command required, but that shouldn't be necessary.
+ */
+static void mcf8390_reset_8390(struct net_device *dev)
+{
+ unsigned long reset_start_time = jiffies;
+ u32 addr = dev->base_addr;
+
+ if (ei_debug > 1)
+ netdev_dbg(dev, "resetting the 8390 t=%ld...\n", jiffies);
+
+ ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);
+
+ ei_status.txing = 0;
+ ei_status.dmaing = 0;
+
+ /* This check _should_not_ be necessary, omit eventually. */
+ while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RESET) == 0) {
+ if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) {
+ netdev_warn(dev, "%s: did not complete\n", __func__);
+ break;
+ }
+ }
+
+ ei_outb(ENISR_RESET, addr + NE_EN0_ISR);
+}
+
+/*
+ * This *shouldn't* happen.
+ * If it does, it's the last thing you'll see
+ */
+static void mcf8390_dmaing_err(const char *func, struct net_device *dev,
+ struct ei_device *ei_local)
+{
+ netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
+ func, ei_local->dmaing, ei_local->irqlock);
+}
+
+/*
+ * Grab the 8390 specific header. Similar to the block_input routine, but
+ * we don't need to be concerned with ring wrap as the header will be at
+ * the start of a page, so we optimize accordingly.
+ */
+static void mcf8390_get_8390_hdr(struct net_device *dev,
+ struct e8390_pkt_hdr *hdr, int ring_page)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ u32 addr = dev->base_addr;
+
+ if (ei_local->dmaing) {
+ mcf8390_dmaing_err(__func__, dev, ei_local);
+ return;
+ }
+
+ ei_local->dmaing |= 0x01;
+ ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, addr + NE_CMD);
+ ei_outb(ENISR_RDC, addr + NE_EN0_ISR);
+ ei_outb(sizeof(struct e8390_pkt_hdr), addr + NE_EN0_RCNTLO);
+ ei_outb(0, addr + NE_EN0_RCNTHI);
+ ei_outb(0, addr + NE_EN0_RSARLO); /* On page boundary */
+ ei_outb(ring_page, addr + NE_EN0_RSARHI);
+ ei_outb(E8390_RREAD + E8390_START, addr + NE_CMD);
+
+ ei_insw(addr + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr) >> 1);
+
+ outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */
+ ei_local->dmaing &= ~0x01;
+
+ hdr->count = cpu_to_le16(hdr->count);
+}
+
+/*
+ * Block input and output, similar to the Crynwr packet driver.
+ * If you are porting to a new ethercard, look at the packet driver source
+ * for hints. The NEx000 doesn't share the on-board packet memory --
+ * you have to put the packet out through the "remote DMA" dataport
+ * using z_writeb.
+ */
+static void mcf8390_block_input(struct net_device *dev, int count,
+ struct sk_buff *skb, int ring_offset)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ u32 addr = dev->base_addr;
+ char *buf = skb->data;
+
+ if (ei_local->dmaing) {
+ mcf8390_dmaing_err(__func__, dev, ei_local);
+ return;
+ }
+
+ ei_local->dmaing |= 0x01;
+ ei_outb(E8390_NODMA + E8390_PAGE0 + E8390_START, addr + NE_CMD);
+ ei_outb(ENISR_RDC, addr + NE_EN0_ISR);
+ ei_outb(count & 0xff, addr + NE_EN0_RCNTLO);
+ ei_outb(count >> 8, addr + NE_EN0_RCNTHI);
+ ei_outb(ring_offset & 0xff, addr + NE_EN0_RSARLO);
+ ei_outb(ring_offset >> 8, addr + NE_EN0_RSARHI);
+ ei_outb(E8390_RREAD + E8390_START, addr + NE_CMD);
+
+ ei_insw(addr + NE_DATAPORT, buf, count >> 1);
+ if (count & 1)
+ buf[count - 1] = ei_inb(addr + NE_DATAPORT);
+
+ ei_outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */
+ ei_local->dmaing &= ~0x01;
+}
+
+static void mcf8390_block_output(struct net_device *dev, int count,
+ const unsigned char *buf,
+ const int start_page)
+{
+ struct ei_device *ei_local = netdev_priv(dev);
+ u32 addr = dev->base_addr;
+ unsigned long dma_start;
+
+ /* Make sure we transfer all bytes if 16bit IO writes */
+ if (count & 0x1)
+ count++;
+
+ if (ei_local->dmaing) {
+ mcf8390_dmaing_err(__func__, dev, ei_local);
+ return;
+ }
+
+ ei_local->dmaing |= 0x01;
+ /* We should already be in page 0, but to be safe... */
+ ei_outb(E8390_PAGE0 + E8390_START + E8390_NODMA, addr + NE_CMD);
+
+ ei_outb(ENISR_RDC, addr + NE_EN0_ISR);
+
+ /* Now the normal output. */
+ ei_outb(count & 0xff, addr + NE_EN0_RCNTLO);
+ ei_outb(count >> 8, addr + NE_EN0_RCNTHI);
+ ei_outb(0x00, addr + NE_EN0_RSARLO);
+ ei_outb(start_page, addr + NE_EN0_RSARHI);
+ ei_outb(E8390_RWRITE + E8390_START, addr + NE_CMD);
+
+ ei_outsw(addr + NE_DATAPORT, buf, count >> 1);
+
+ dma_start = jiffies;
+ while ((ei_inb(addr + NE_EN0_ISR) & ENISR_RDC) == 0) {
+ if (time_after(jiffies, dma_start + 2 * HZ / 100)) { /* 20ms */
+ netdev_err(dev, "timeout waiting for Tx RDC\n");
+ mcf8390_reset_8390(dev);
+ __NS8390_init(dev, 1);
+ break;
+ }
+ }
+
+ ei_outb(ENISR_RDC, addr + NE_EN0_ISR); /* Ack intr */
+ ei_local->dmaing &= ~0x01;
+}
+
+static const struct net_device_ops mcf8390_netdev_ops = {
+ .ndo_open = __ei_open,
+ .ndo_stop = __ei_close,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_rx_mode = __ei_set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = __ei_poll,
+#endif
+};
+
+static int mcf8390_init(struct net_device *dev)
+{
+ static u32 offsets[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ };
+ struct ei_device *ei_local = netdev_priv(dev);
+ unsigned char SA_prom[32];
+ u32 addr = dev->base_addr;
+ int start_page, stop_page;
+ int i, ret;
+
+ mcf8390_reset_8390(dev);
+
+ /*
+ * Read the 16 bytes of station address PROM.
+ * We must first initialize registers,
+ * similar to NS8390_init(eifdev, 0).
+ * We can't reliably read the SAPROM address without this.
+ * (I learned the hard way!).
+ */
+ {
+ static const struct {
+ u32 value;
+ u32 offset;
+ } program_seq[] = {
+ {E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD},
+ /* Select page 0 */
+ {0x48, NE_EN0_DCFG}, /* 0x48: Set byte-wide access */
+ {0x00, NE_EN0_RCNTLO}, /* Clear the count regs */
+ {0x00, NE_EN0_RCNTHI},
+ {0x00, NE_EN0_IMR}, /* Mask completion irq */
+ {0xFF, NE_EN0_ISR},
+ {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
+ {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */
+ {32, NE_EN0_RCNTLO},
+ {0x00, NE_EN0_RCNTHI},
+ {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000 */
+ {0x00, NE_EN0_RSARHI},
+ {E8390_RREAD + E8390_START, NE_CMD},
+ };
+ for (i = 0; i < ARRAY_SIZE(program_seq); i++) {
+ ei_outb(program_seq[i].value,
+ addr + program_seq[i].offset);
+ }
+ }
+
+ for (i = 0; i < 16; i++) {
+ SA_prom[i] = ei_inb(addr + NE_DATAPORT);
+ ei_inb(addr + NE_DATAPORT);
+ }
+
+ /* We must set the 8390 for word mode. */
+ ei_outb(0x49, addr + NE_EN0_DCFG);
+ start_page = NESM_START_PG;
+ stop_page = NESM_STOP_PG;
+
+ /* Install the Interrupt handler */
+ ret = request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ dev->dev_addr[i] = SA_prom[i];
+
+ netdev_dbg(dev, "Found ethernet address: %pM\n", dev->dev_addr);
+
+ ei_local->name = "mcf8390";
+ ei_local->tx_start_page = start_page;
+ ei_local->stop_page = stop_page;
+ ei_local->word16 = 1;
+ ei_local->rx_start_page = start_page + TX_PAGES;
+ ei_local->reset_8390 = mcf8390_reset_8390;
+ ei_local->block_input = mcf8390_block_input;
+ ei_local->block_output = mcf8390_block_output;
+ ei_local->get_8390_hdr = mcf8390_get_8390_hdr;
+ ei_local->reg_offset = offsets;
+
+ dev->netdev_ops = &mcf8390_netdev_ops;
+ __NS8390_init(dev, 0);
+ ret = register_netdev(dev);
+ if (ret) {
+ free_irq(dev->irq, dev);
+ return ret;
+ }
+
+ netdev_info(dev, "addr=0x%08x irq=%d, Ethernet Address %pM\n",
+ addr, dev->irq, dev->dev_addr);
+ return 0;
+}
+
+static int mcf8390_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct ei_device *ei_local;
+ struct resource *mem, *irq;
+ resource_size_t msize;
+ int ret;
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (irq == NULL) {
+ dev_err(&pdev->dev, "no IRQ specified?\n");
+ return -ENXIO;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (mem == NULL) {
+ dev_err(&pdev->dev, "no memory address specified?\n");
+ return -ENXIO;
+ }
+ msize = resource_size(mem);
+ if (!request_mem_region(mem->start, msize, pdev->name))
+ return -EBUSY;
+
+ dev = ____alloc_ei_netdev(0);
+ if (dev == NULL) {
+ release_mem_region(mem->start, msize);
+ return -ENOMEM;
+ }
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
+ ei_local = netdev_priv(dev);
+
+ dev->irq = irq->start;
+ dev->base_addr = mem->start;
+
+ ret = mcf8390_init(dev);
+ if (ret) {
+ release_mem_region(mem->start, msize);
+ free_netdev(dev);
+ return ret;
+ }
+ return 0;
+}
+
+static int mcf8390_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct resource *mem;
+
+ unregister_netdev(dev);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (mem)
+ release_mem_region(mem->start, resource_size(mem));
+ free_netdev(dev);
+ return 0;
+}
+
+static struct platform_driver mcf8390_drv = {
+ .driver = {
+ .name = "mcf8390",
+ .owner = THIS_MODULE,
+ },
+ .probe = mcf8390_probe,
+ .remove = mcf8390_remove,
+};
+
+module_platform_driver(mcf8390_drv);
+
+MODULE_DESCRIPTION("MCF8390 ColdFire NS8390 driver");
+MODULE_AUTHOR("Greg Ungerer <gerg@uclinux.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mcf8390");
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff