ARM: sun8i: a83t: Add USB PHY and host device nodes

The A83T has 3 USB PHYs, 1 for USB OTG, 1 for standard USB 2.0, 1 for
USB HSIC. EHCI0/OHCI0 are the standard USB host pair, while EHCI1 is
the host controller for HSIC. OTG is not added yet.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 61304761e8f613268cfe1b7d8d6451befdf27d9c..6039f1ea6810d42c758382a2d0a9e9b546c3b2bd 100644 (file)
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -242,6 +242,68 @@
                        #size-cells = <0>;
                };
 
+               usbphy: phy@1c19400 {
+                       compatible = "allwinner,sun8i-a83t-usb-phy";
+                       reg = <0x01c19400 0x10>,
+                             <0x01c1a800 0x14>,
+                             <0x01c1b800 0x14>;
+                       reg-names = "phy_ctrl",
+                                   "pmu1",
+                                   "pmu2";
+                       clocks = <&ccu CLK_USB_PHY0>,
+                                <&ccu CLK_USB_PHY1>,
+                                <&ccu CLK_USB_HSIC>,
+                                <&ccu CLK_USB_HSIC_12M>;
+                       clock-names = "usb0_phy",
+                                     "usb1_phy",
+                                     "usb2_phy",
+                                     "usb2_hsic_12M";
+                       resets = <&ccu RST_USB_PHY0>,
+                                <&ccu RST_USB_PHY1>,
+                                <&ccu RST_USB_HSIC>;
+                       reset-names = "usb0_reset",
+                                     "usb1_reset",
+                                     "usb2_reset";
+                       status = "disabled";
+                       #phy-cells = <1>;
+               };
+
+               ehci0: usb@1c1a000 {
+                       compatible = "allwinner,sun8i-a83t-ehci",
+                                    "generic-ehci";
+                       reg = <0x01c1a000 0x100>;
+                       interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_EHCI0>;
+                       resets = <&ccu RST_BUS_EHCI0>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci0: usb@1c1a400 {
+                       compatible = "allwinner,sun8i-a83t-ohci",
+                                    "generic-ohci";
+                       reg = <0x01c1a400 0x100>;
+                       interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
+                       resets = <&ccu RST_BUS_OHCI0>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ehci1: usb@1c1b000 {
+                       compatible = "allwinner,sun8i-a83t-ehci",
+                                    "generic-ehci";
+                       reg = <0x01c1b000 0x100>;
+                       interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_EHCI1>;
+                       resets = <&ccu RST_BUS_EHCI1>;
+                       phys = <&usbphy 2>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
                ccu: clock@1c20000 {
                        compatible = "allwinner,sun8i-a83t-ccu";
                        reg = <0x01c20000 0x400>;