func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+ if (id->driver_data) {
+ struct mwifiex_sdio_device *data = (void *)id->driver_data;
+
+ card->firmware = data->firmware;
+ card->reg = data->reg;
+ card->max_ports = data->max_ports;
+ card->mp_agg_pkt_limit = data->mp_agg_pkt_limit;
+ }
+
sdio_claim_host(func);
ret = sdio_enable_func(func);
sdio_release_host(func);
/* WLAN IDs */
static const struct sdio_device_id mwifiex_ids[] = {
- {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786)},
- {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787)},
- {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797)},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786),
+ .driver_data = (unsigned long) &mwifiex_sdio_sd8786},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787),
+ .driver_data = (unsigned long) &mwifiex_sdio_sd8787},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797),
+ .driver_data = (unsigned long) &mwifiex_sdio_sd8797},
{},
};
static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
{
u32 reg;
+ struct sdio_mmc_card *card = adapter->card;
adapter->ioport = 0;
/* Set Host interrupt reset to read to clear */
if (!mwifiex_read_reg(adapter, HOST_INT_RSR_REG, ®))
mwifiex_write_reg(adapter, HOST_INT_RSR_REG,
- reg | SDIO_INT_MASK);
+ reg | card->reg->sdio_int_mask);
else
return -1;
/* Dnld/Upld ready set to auto reset */
- if (!mwifiex_read_reg(adapter, CARD_MISC_CFG_REG, ®))
- mwifiex_write_reg(adapter, CARD_MISC_CFG_REG,
+ if (!mwifiex_read_reg(adapter, card->reg->card_misc_cfg_reg, ®))
+ mwifiex_write_reg(adapter, card->reg->card_misc_cfg_reg,
reg | AUTO_RE_ENABLE_INT);
else
return -1;
static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
{
struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
u32 rd_bitmap = card->mp_rd_bitmap;
dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%08x\n", rd_bitmap);
- if (!(rd_bitmap & (CTRL_PORT_MASK | DATA_PORT_MASK)))
+ if (!(rd_bitmap & (CTRL_PORT_MASK | reg->data_port_mask)))
return -1;
if (card->mp_rd_bitmap & CTRL_PORT_MASK) {
(~(1 << card->curr_rd_port));
*port = card->curr_rd_port;
- if (++card->curr_rd_port == MAX_PORT)
- card->curr_rd_port = 1;
+ if (++card->curr_rd_port == card->max_ports)
+ card->curr_rd_port = reg->start_rd_port;
} else {
return -1;
}
card->mp_wr_bitmap &= (u32) (~(1 << card->curr_wr_port));
*port = card->curr_wr_port;
if (++card->curr_wr_port == card->mp_end_port)
- card->curr_wr_port = 1;
+ card->curr_wr_port = card->reg->start_wr_port;
} else {
adapter->data_sent = true;
return -EBUSY;
static int
mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
{
+ struct sdio_mmc_card *card = adapter->card;
u32 tries;
u32 cs;
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
- if (mwifiex_read_reg(adapter, CARD_STATUS_REG, &cs))
+ if (mwifiex_read_reg(adapter, card->reg->poll_reg, &cs))
break;
else if ((cs & bits) == bits)
return 0;
static int
mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
{
+ struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
u32 fws0, fws1;
- if (mwifiex_read_reg(adapter, CARD_FW_STATUS0_REG, &fws0))
+ if (mwifiex_read_reg(adapter, reg->status_reg_0, &fws0))
return -1;
- if (mwifiex_read_reg(adapter, CARD_FW_STATUS1_REG, &fws1))
+ if (mwifiex_read_reg(adapter, reg->status_reg_1, &fws1))
return -1;
*dat = (u16) ((fws1 << 8) | fws0);
*/
static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter)
{
+ struct sdio_mmc_card *card = adapter->card;
+
/* Simply write the mask to the register */
- if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, HOST_INT_ENABLE)) {
+ if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG,
+ card->reg->host_int_enable)) {
dev_err(adapter->dev, "enable host interrupt failed\n");
return -1;
}
static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
struct mwifiex_fw_image *fw)
{
+ struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
int ret;
u8 *firmware = fw->fw_buf;
u32 firmware_len = fw->fw_len;
break;
for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
- ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_0,
+ ret = mwifiex_read_reg(adapter, reg->base_0_reg,
&base0);
if (ret) {
dev_err(adapter->dev,
base0, base0);
goto done;
}
- ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_1,
+ ret = mwifiex_read_reg(adapter, reg->base_1_reg,
&base1);
if (ret) {
dev_err(adapter->dev,
static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
u32 poll_num)
{
+ struct sdio_mmc_card *card = adapter->card;
int ret = 0;
u16 firmware_stat;
u32 tries;
if (ret) {
if (mwifiex_read_reg
- (adapter, CARD_FW_STATUS0_REG, &winner_status))
+ (adapter, card->reg->status_reg_0, &winner_status))
winner_status = 0;
if (winner_status)
u32 sdio_ireg;
unsigned long flags;
- if (mwifiex_read_data_sync(adapter, card->mp_regs, MAX_MP_REGS,
- REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK,
- 0)) {
+ if (mwifiex_read_data_sync(adapter, card->mp_regs,
+ card->reg->max_mp_regs,
+ REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK, 0)) {
dev_err(adapter->dev, "read mp_regs failed\n");
return;
}
static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
{
struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
int ret = 0;
u8 sdio_ireg;
struct sk_buff *skb;
return ret;
if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
- card->mp_wr_bitmap = ((u32) card->mp_regs[WR_BITMAP_U]) << 8;
- card->mp_wr_bitmap |= (u32) card->mp_regs[WR_BITMAP_L];
+ card->mp_wr_bitmap =
+ ((u32) card->mp_regs[reg->wr_bitmap_u]) << 8;
+ card->mp_wr_bitmap |=
+ (u32) card->mp_regs[reg->wr_bitmap_l];
dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%08x\n",
card->mp_wr_bitmap);
if (adapter->data_sent &&
/* Check if firmware has attach buffer at command port and
update just that in wr_bit_map. */
card->mp_wr_bitmap |=
- (u32) card->mp_regs[WR_BITMAP_L] & CTRL_PORT_MASK;
+ (u32) card->mp_regs[reg->wr_bitmap_l] & CTRL_PORT_MASK;
if (card->mp_wr_bitmap & CTRL_PORT_MASK)
adapter->cmd_sent = false;
}
dev_dbg(adapter->dev, "info: cmd_sent=%d data_sent=%d\n",
adapter->cmd_sent, adapter->data_sent);
if (sdio_ireg & UP_LD_HOST_INT_STATUS) {
- card->mp_rd_bitmap = ((u32) card->mp_regs[RD_BITMAP_U]) << 8;
- card->mp_rd_bitmap |= (u32) card->mp_regs[RD_BITMAP_L];
+ card->mp_rd_bitmap =
+ ((u32) card->mp_regs[reg->rd_bitmap_u]) << 8;
+ card->mp_rd_bitmap |= (u32) card->mp_regs[reg->rd_bitmap_l];
dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%08x\n",
card->mp_rd_bitmap);
"info: no more rd_port available\n");
break;
}
- len_reg_l = RD_LEN_P0_L + (port << 1);
- len_reg_u = RD_LEN_P0_U + (port << 1);
+ len_reg_l = reg->rd_len_p0_l + (port << 1);
+ len_reg_u = reg->rd_len_p0_u + (port << 1);
rx_len = ((u16) card->mp_regs[len_reg_u]) << 8;
rx_len |= (u16) card->mp_regs[len_reg_l];
dev_dbg(adapter->dev, "info: RX: port=%d rx_len=%u\n",
adapter->dev = &func->dev;
- switch (func->device) {
- case SDIO_DEVICE_ID_MARVELL_8786:
- strcpy(adapter->fw_name, SD8786_DEFAULT_FW_NAME);
- break;
- case SDIO_DEVICE_ID_MARVELL_8797:
- strcpy(adapter->fw_name, SD8797_DEFAULT_FW_NAME);
- break;
- case SDIO_DEVICE_ID_MARVELL_8787:
- default:
- strcpy(adapter->fw_name, SD8787_DEFAULT_FW_NAME);
- break;
- }
+ strcpy(adapter->fw_name, card->firmware);
return 0;
static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
{
struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
int ret;
u32 sdio_ireg;
/* Initialize SDIO variables in card */
card->mp_rd_bitmap = 0;
card->mp_wr_bitmap = 0;
- card->curr_rd_port = 1;
- card->curr_wr_port = 1;
+ card->curr_rd_port = reg->start_rd_port;
+ card->curr_wr_port = reg->start_wr_port;
- card->mp_data_port_mask = DATA_PORT_MASK;
+ card->mp_data_port_mask = reg->data_port_mask;
card->mpa_tx.buf_len = 0;
card->mpa_tx.pkt_cnt = 0;
card->mpa_tx.start_port = 0;
card->mpa_tx.enabled = 1;
- card->mpa_tx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT;
+ card->mpa_tx.pkt_aggr_limit = card->mp_agg_pkt_limit;
card->mpa_rx.buf_len = 0;
card->mpa_rx.pkt_cnt = 0;
card->mpa_rx.start_port = 0;
card->mpa_rx.enabled = 1;
- card->mpa_rx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT;
+ card->mpa_rx.pkt_aggr_limit = card->mp_agg_pkt_limit;
/* Allocate buffers for SDIO MP-A */
- card->mp_regs = kzalloc(MAX_MP_REGS, GFP_KERNEL);
+ card->mp_regs = kzalloc(reg->max_mp_regs, GFP_KERNEL);
if (!card->mp_regs)
return -ENOMEM;
mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port)
{
struct sdio_mmc_card *card = adapter->card;
+ const struct mwifiex_sdio_card_reg *reg = card->reg;
int i;
card->mp_end_port = port;
- card->mp_data_port_mask = DATA_PORT_MASK;
+ card->mp_data_port_mask = reg->data_port_mask;
- for (i = 1; i <= MAX_PORT - card->mp_end_port; i++)
- card->mp_data_port_mask &= ~(1 << (MAX_PORT - i));
+ for (i = 1; i <= card->max_ports - card->mp_end_port; i++)
+ card->mp_data_port_mask &= ~(1 << (card->max_ports - i));
- card->curr_wr_port = 1;
+ card->curr_wr_port = reg->start_wr_port;
dev_dbg(adapter->dev, "cmd: mp_end_port %d, data port mask 0x%x\n",
port, card->mp_data_port_mask);
#define BYTE_MODE 0
#define REG_PORT 0
-#define RD_BITMAP_L 0x04
-#define RD_BITMAP_U 0x05
-#define WR_BITMAP_L 0x06
-#define WR_BITMAP_U 0x07
-#define RD_LEN_P0_L 0x08
-#define RD_LEN_P0_U 0x09
#define MWIFIEX_SDIO_IO_PORT_MASK 0xfffff
#define CTRL_PORT 0
#define CTRL_PORT_MASK 0x0001
-#define DATA_PORT_MASK 0xfffe
-#define MAX_MP_REGS 64
-#define MAX_PORT 16
-
-#define SDIO_MP_AGGR_DEF_PKT_LIMIT 8
+#define SDIO_MP_AGGR_DEF_PKT_LIMIT 8
#define SDIO_MP_TX_AGGR_DEF_BUF_SIZE (8192) /* 8K */
#define UP_LD_HOST_INT_MASK (0x1U)
/* Host Control Registers : Download host interrupt mask */
#define DN_LD_HOST_INT_MASK (0x2U)
-/* Enable Host interrupt mask */
-#define HOST_INT_ENABLE (UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK)
/* Disable Host interrupt mask */
#define HOST_INT_DISABLE 0xff
#define HOST_INT_RSR_REG 0x01
/* Host Control Registers : Upload host interrupt RSR */
#define UP_LD_HOST_INT_RSR (0x1U)
-#define SDIO_INT_MASK 0x3F
/* Host Control Registers : Host interrupt status */
#define HOST_INT_STATUS_REG 0x28
/* Host Control Registers : Download restart */
#define DN_LD_RESTART (0x1U << 0)
-/* Card Control Registers : Card status register */
-#define CARD_STATUS_REG 0x30
/* Card Control Registers : Card I/O ready */
#define CARD_IO_READY (0x1U << 3)
/* Card Control Registers : CIS card ready */
/* Card Control Registers : Power down RSR */
#define POWER_DOWN_RSR (0x1U << 3)
-/* Card Control Registers : Miscellaneous Configuration Register */
-#define CARD_MISC_CFG_REG 0x6C
-
-/* Host F1 read base 0 */
-#define HOST_F1_RD_BASE_0 0x0040
-/* Host F1 read base 1 */
-#define HOST_F1_RD_BASE_1 0x0041
/* Host F1 card ready */
#define HOST_F1_CARD_RDY 0x0020
-/* Firmware status 0 register */
-#define CARD_FW_STATUS0_REG 0x60
-/* Firmware status 1 register */
-#define CARD_FW_STATUS1_REG 0x61
/* Rx length register */
#define CARD_RX_LEN_REG 0x62
/* Rx unit register */
if (a->mpa_tx.start_port <= port) \
a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt)); \
else \
- a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT - \
+ a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+ \
+ (a->max_ports - \
a->mp_end_port))); \
a->mpa_tx.pkt_cnt++; \
} while (0)
/* SDIO Tx aggregation port limit ? */
#define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port < \
- a->mpa_tx.start_port) && (((MAX_PORT - \
+ a->mpa_tx.start_port) && (((a->max_ports -\
a->mpa_tx.start_port) + a->curr_wr_port) >= \
- SDIO_MP_AGGR_DEF_PKT_LIMIT))
+ a->mp_agg_pkt_limit))
/* Reset SDIO Tx aggregation buffer parameters */
#define MP_TX_AGGR_BUF_RESET(a) do { \
/* SDIO Tx aggregation port limit ? */
#define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port < \
- a->mpa_rx.start_port) && (((MAX_PORT - \
+ a->mpa_rx.start_port) && (((a->max_ports -\
a->mpa_rx.start_port) + a->curr_rd_port) >= \
- SDIO_MP_AGGR_DEF_PKT_LIMIT))
+ a->mp_agg_pkt_limit))
/* SDIO Rx aggregation in progress ? */
#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)
int mwifiex_bus_register(void);
void mwifiex_bus_unregister(void);
+struct mwifiex_sdio_card_reg {
+ u8 start_rd_port;
+ u8 start_wr_port;
+ u8 base_0_reg;
+ u8 base_1_reg;
+ u8 poll_reg;
+ u8 host_int_enable;
+ u8 status_reg_0;
+ u8 status_reg_1;
+ u8 sdio_int_mask;
+ u32 data_port_mask;
+ u8 max_mp_regs;
+ u8 rd_bitmap_l;
+ u8 rd_bitmap_u;
+ u8 wr_bitmap_l;
+ u8 wr_bitmap_u;
+ u8 rd_len_p0_l;
+ u8 rd_len_p0_u;
+ u8 card_misc_cfg_reg;
+};
+
struct sdio_mmc_card {
struct sdio_func *func;
struct mwifiex_adapter *adapter;
+ const char *firmware;
+ const struct mwifiex_sdio_card_reg *reg;
+ u8 max_ports;
+ u8 mp_agg_pkt_limit;
+
u32 mp_rd_bitmap;
u32 mp_wr_bitmap;
struct mwifiex_sdio_mpa_rx mpa_rx;
};
+struct mwifiex_sdio_device {
+ const char *firmware;
+ const struct mwifiex_sdio_card_reg *reg;
+ u8 max_ports;
+ u8 mp_agg_pkt_limit;
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
+ .start_rd_port = 1,
+ .start_wr_port = 1,
+ .base_0_reg = 0x0040,
+ .base_1_reg = 0x0041,
+ .poll_reg = 0x30,
+ .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK,
+ .status_reg_0 = 0x60,
+ .status_reg_1 = 0x61,
+ .sdio_int_mask = 0x3f,
+ .data_port_mask = 0x0000fffe,
+ .max_mp_regs = 64,
+ .rd_bitmap_l = 0x04,
+ .rd_bitmap_u = 0x05,
+ .wr_bitmap_l = 0x06,
+ .wr_bitmap_u = 0x07,
+ .rd_len_p0_l = 0x08,
+ .rd_len_p0_u = 0x09,
+ .card_misc_cfg_reg = 0x6c,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
+ .firmware = SD8786_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_sd87xx,
+ .max_ports = 16,
+ .mp_agg_pkt_limit = 8,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
+ .firmware = SD8787_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_sd87xx,
+ .max_ports = 16,
+ .mp_agg_pkt_limit = 8,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
+ .firmware = SD8797_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_sd87xx,
+ .max_ports = 16,
+ .mp_agg_pkt_limit = 8,
+};
+
/*
* .cmdrsp_complete handler
*/
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff