phy: phy_{read|write}_mmd_indirect: get addr from phydev

The address of the device can be determined from the phydev structure,
rather than passing it as a parameter.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index ddb377e53633acca027232c3ed8b90eb772d49ac..df0416db0b88fce5899cae9cc9f3e9df5c7c624a 100644 (file)
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -184,25 +184,25 @@ int bcm_phy_enable_eee(struct phy_device *phydev)
 
        /* Enable EEE at PHY level */
        val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
-                                   MDIO_MMD_AN, phydev->addr);
+                                   MDIO_MMD_AN);
        if (val < 0)
                return val;
 
        val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
 
        phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
-                              MDIO_MMD_AN,  phydev->addr, (u32)val);
+                              MDIO_MMD_AN, (u32)val);
 
        /* Advertise EEE */
        val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
-                                   MDIO_MMD_AN, phydev->addr);
+                                   MDIO_MMD_AN);
        if (val < 0)
                return val;
 
        val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
 
        phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
-                              MDIO_MMD_AN,  phydev->addr, (u32)val);
+                              MDIO_MMD_AN, (u32)val);
 
        return 0;
 }

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 4ebf601073d97dae09aa5541f4877e0d1aa19017..e4c0b0c0af022bb2e5cc702f6da1128fb5877f4d 100644 (file)
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -160,7 +160,7 @@ static int dp83867_config_init(struct phy_device *phydev)
        if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) &&
            (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) {
                val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL,
-                                           DP83867_DEVADDR, phydev->addr);
+                                           DP83867_DEVADDR);
 
                if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
                        val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN);
@@ -172,13 +172,13 @@ static int dp83867_config_init(struct phy_device *phydev)
                        val |= DP83867_RGMII_RX_CLK_DELAY_EN;
 
                phy_write_mmd_indirect(phydev, DP83867_RGMIICTL,
-                                      DP83867_DEVADDR, phydev->addr, val);
+                                      DP83867_DEVADDR, val);
 
                delay = (dp83867->rx_id_delay |
                        (dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT));
 
                phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL,
-                                      DP83867_DEVADDR, phydev->addr, delay);
+                                      DP83867_DEVADDR, delay);
        }
 
        return 0;

diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index c0a20ebd083b1b070e56e1dfe46598b4e7bd2c60..99df5bc474241aaa00af6ac5fd778a993e5f9465 100644 (file)
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -78,10 +78,9 @@ static int lan88xx_probe(struct phy_device *phydev)
        priv->wolopts = 0;
 
        /* these values can be used to identify internal PHY */
-       priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID,
-                                             3, phydev->addr);
+       priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID, 3);
        priv->chip_rev = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_REV,
-                                              3, phydev->addr);
+                                              3);
 
        phydev->priv = priv;
 

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 9771941cf0ee182e9dc9598fcf7bef71ce08dde9..56c8dd8c0c85459e54734f66f7e7600bef3ac7de 100644 (file)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1029,7 +1029,6 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
  * @phydev: The PHY device bus
  * @prtad: MMD Address
  * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
  *
  * Description: it reads data from the MMD registers (clause 22 to access to
  * clause 45) of the specified phy address.
@@ -1039,10 +1038,10 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
  * 3) Write reg 13 // MMD Data Command for MMD DEVAD
  * 3) Read  reg 14 // Read MMD data
  */
-int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
-                                int devad, int addr)
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad)
 {
        struct phy_driver *phydrv = phydev->drv;
+       int addr = phydev->addr;
        int value = -1;
 
        if (!phydrv->read_mmd_indirect) {
@@ -1066,7 +1065,6 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
  * @phydev: The PHY device
  * @prtad: MMD Address
  * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
  * @data: data to write in the MMD register
  *
  * Description: Write data from the MMD registers of the specified
@@ -1078,9 +1076,10 @@ EXPORT_SYMBOL(phy_read_mmd_indirect);
  * 3) Write reg 14 // Write MMD data
  */
 void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
-                                  int devad, int addr, u32 data)
+                                  int devad, u32 data)
 {
        struct phy_driver *phydrv = phydev->drv;
+       int addr = phydev->addr;
 
        if (!phydrv->write_mmd_indirect) {
                struct mii_bus *bus = phydev->bus;
@@ -1130,7 +1129,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 
                /* First check if the EEE ability is supported */
                eee_cap = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
-                                               MDIO_MMD_PCS, phydev->addr);
+                                               MDIO_MMD_PCS);
                if (eee_cap <= 0)
                        goto eee_exit_err;
 
@@ -1142,12 +1141,12 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
                 * the EEE advertising registers.
                 */
                eee_lp = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
-                                              MDIO_MMD_AN, phydev->addr);
+                                              MDIO_MMD_AN);
                if (eee_lp <= 0)
                        goto eee_exit_err;
 
                eee_adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-                                               MDIO_MMD_AN, phydev->addr);
+                                               MDIO_MMD_AN);
                if (eee_adv <= 0)
                        goto eee_exit_err;
 
@@ -1161,15 +1160,13 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
                         * clock while it is signaling LPI.
                         */
                        int val = phy_read_mmd_indirect(phydev, MDIO_CTRL1,
-                                                       MDIO_MMD_PCS,
-                                                       phydev->addr);
+                                                       MDIO_MMD_PCS);
                        if (val < 0)
                                return val;
 
                        val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
                        phy_write_mmd_indirect(phydev, MDIO_CTRL1,
-                                              MDIO_MMD_PCS, phydev->addr,
-                                              val);
+                                              MDIO_MMD_PCS, val);
                }
 
                return 0; /* EEE supported */
@@ -1188,8 +1185,7 @@ EXPORT_SYMBOL(phy_init_eee);
  */
 int phy_get_eee_err(struct phy_device *phydev)
 {
-       return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR,
-                                    MDIO_MMD_PCS, phydev->addr);
+       return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR, MDIO_MMD_PCS);
 }
 EXPORT_SYMBOL(phy_get_eee_err);
 
@@ -1206,22 +1202,19 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
        int val;
 
        /* Get Supported EEE */
-       val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE,
-                                   MDIO_MMD_PCS, phydev->addr);
+       val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE, MDIO_MMD_PCS);
        if (val < 0)
                return val;
        data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
 
        /* Get advertisement EEE */
-       val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-                                   MDIO_MMD_AN, phydev->addr);
+       val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN);
        if (val < 0)
                return val;
        data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
 
        /* Get LP advertisement EEE */
-       val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE,
-                                   MDIO_MMD_AN, phydev->addr);
+       val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE, MDIO_MMD_AN);
        if (val < 0)
                return val;
        data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
@@ -1241,8 +1234,7 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
 {
        int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
 
-       phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
-                              phydev->addr, val);
+       phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
 
        return 0;
 }

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5f5cc3424b9ed7593973f0607b4f7ba4f0cbe8a6..08198ce98773b2b22e59db4a0171c87a4abeb790 100644 (file)
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -629,14 +629,12 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
  * phy_read_mmd_indirect - reads data from the MMD registers
  * @phydev: The PHY device bus
  * @prtad: MMD Address
- * @devad: MMD DEVAD
  * @addr: PHY address on the MII bus
  *
  * Description: it reads data from the MMD registers (clause 22 to access to
  * clause 45) of the specified phy address.
  */
-int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
-                         int devad, int addr);
+int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad);
 
 /**
  * phy_read - Convenience function for reading a given PHY register
@@ -735,14 +733,13 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad,
  * @phydev: The PHY device
  * @prtad: MMD Address
  * @devad: MMD DEVAD
- * @addr: PHY address on the MII bus
  * @data: data to write in the MMD register
  *
  * Description: Write data from the MMD registers of the specified
  * phy address.
  */
 void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
-                           int devad, int addr, u32 data);
+                           int devad, u32 data);
 
 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
                                     bool is_c45,