kmemleak: Add documentation on the memory leak detector

This patch adds the Documentation/kmemleak.txt file with some
information about how kmemleak works.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4a3c2209a124b9d34f5305e66992cbc350e1df96..04a44cc5048ab384c22a6e4ab2df1f81f58ad870 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1077,6 +1077,10 @@ and is between 256 and 4096 characters. It is defined in the file
                        Configure the RouterBoard 532 series on-chip
                        Ethernet adapter MAC address.
 
+       kmemleak=       [KNL] Boot-time kmemleak enable/disable
+                       Valid arguments: on, off
+                       Default: on
+
        kstack=N        [X86] Print N words from the kernel stack
                        in oops dumps.
 

diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt
new file mode 100644 (file)
index 0000000..0112da3
--- /dev/null
+++ b/Documentation/kmemleak.txt
@@ -0,0 +1,142 @@
+Kernel Memory Leak Detector
+===========================
+
+Introduction
+------------
+
+Kmemleak provides a way of detecting possible kernel memory leaks in a
+way similar to a tracing garbage collector
+(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
+with the difference that the orphan objects are not freed but only
+reported via /sys/kernel/debug/kmemleak. A similar method is used by the
+Valgrind tool (memcheck --leak-check) to detect the memory leaks in
+user-space applications.
+
+Usage
+-----
+
+CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
+thread scans the memory every 10 minutes (by default) and prints any new
+unreferenced objects found. To trigger an intermediate scan and display
+all the possible memory leaks:
+
+  # mount -t debugfs nodev /sys/kernel/debug/
+  # cat /sys/kernel/debug/kmemleak
+
+Note that the orphan objects are listed in the order they were allocated
+and one object at the beginning of the list may cause other subsequent
+objects to be reported as orphan.
+
+Memory scanning parameters can be modified at run-time by writing to the
+/sys/kernel/debug/kmemleak file. The following parameters are supported:
+
+  off          - disable kmemleak (irreversible)
+  stack=on     - enable the task stacks scanning
+  stack=off    - disable the tasks stacks scanning
+  scan=on      - start the automatic memory scanning thread
+  scan=off     - stop the automatic memory scanning thread
+  scan=<secs>  - set the automatic memory scanning period in seconds (0
+                 to disable it)
+
+Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
+the kernel command line.
+
+Basic Algorithm
+---------------
+
+The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
+friends are traced and the pointers, together with additional
+information like size and stack trace, are stored in a prio search tree.
+The corresponding freeing function calls are tracked and the pointers
+removed from the kmemleak data structures.
+
+An allocated block of memory is considered orphan if no pointer to its
+start address or to any location inside the block can be found by
+scanning the memory (including saved registers). This means that there
+might be no way for the kernel to pass the address of the allocated
+block to a freeing function and therefore the block is considered a
+memory leak.
+
+The scanning algorithm steps:
+
+  1. mark all objects as white (remaining white objects will later be
+     considered orphan)
+  2. scan the memory starting with the data section and stacks, checking
+     the values against the addresses stored in the prio search tree. If
+     a pointer to a white object is found, the object is added to the
+     gray list
+  3. scan the gray objects for matching addresses (some white objects
+     can become gray and added at the end of the gray list) until the
+     gray set is finished
+  4. the remaining white objects are considered orphan and reported via
+     /sys/kernel/debug/kmemleak
+
+Some allocated memory blocks have pointers stored in the kernel's
+internal data structures and they cannot be detected as orphans. To
+avoid this, kmemleak can also store the number of values pointing to an
+address inside the block address range that need to be found so that the
+block is not considered a leak. One example is __vmalloc().
+
+Kmemleak API
+------------
+
+See the include/linux/kmemleak.h header for the functions prototype.
+
+kmemleak_init           - initialize kmemleak
+kmemleak_alloc          - notify of a memory block allocation
+kmemleak_free           - notify of a memory block freeing
+kmemleak_not_leak       - mark an object as not a leak
+kmemleak_ignore                 - do not scan or report an object as leak
+kmemleak_scan_area      - add scan areas inside a memory block
+kmemleak_no_scan        - do not scan a memory block
+kmemleak_erase          - erase an old value in a pointer variable
+kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness
+kmemleak_free_recursive         - as kmemleak_free but checks the recursiveness
+
+Dealing with false positives/negatives
+--------------------------------------
+
+The false negatives are real memory leaks (orphan objects) but not
+reported by kmemleak because values found during the memory scanning
+point to such objects. To reduce the number of false negatives, kmemleak
+provides the kmemleak_ignore, kmemleak_scan_area, kmemleak_no_scan and
+kmemleak_erase functions (see above). The task stacks also increase the
+amount of false negatives and their scanning is not enabled by default.
+
+The false positives are objects wrongly reported as being memory leaks
+(orphan). For objects known not to be leaks, kmemleak provides the
+kmemleak_not_leak function. The kmemleak_ignore could also be used if
+the memory block is known not to contain other pointers and it will no
+longer be scanned.
+
+Some of the reported leaks are only transient, especially on SMP
+systems, because of pointers temporarily stored in CPU registers or
+stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing
+the minimum age of an object to be reported as a memory leak.
+
+Limitations and Drawbacks
+-------------------------
+
+The main drawback is the reduced performance of memory allocation and
+freeing. To avoid other penalties, the memory scanning is only performed
+when the /sys/kernel/debug/kmemleak file is read. Anyway, this tool is
+intended for debugging purposes where the performance might not be the
+most important requirement.
+
+To keep the algorithm simple, kmemleak scans for values pointing to any
+address inside a block's address range. This may lead to an increased
+number of false negatives. However, it is likely that a real memory leak
+will eventually become visible.
+
+Another source of false negatives is the data stored in non-pointer
+values. In a future version, kmemleak could only scan the pointer
+members in the allocated structures. This feature would solve many of
+the false negative cases described above.
+
+The tool can report false positives. These are cases where an allocated
+block doesn't need to be freed (some cases in the init_call functions),
+the pointer is calculated by other methods than the usual container_of
+macro or the pointer is stored in a location not scanned by kmemleak.
+
+Page allocations and ioremap are not tracked. Only the ARM and x86
+architectures are currently supported.