* linux/include/asm-m32r/uaccess.h
*
* M32R version.
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org>
*/
-#undef UACCESS_DEBUG
-
-#ifdef UACCESS_DEBUG
-#define UAPRINTK(args...) printk(args)
-#else
-#define UAPRINTK(args...)
-#endif /* UACCESS_DEBUG */
-
/*
* User space memory access functions
*/
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
#ifdef CONFIG_MMU
+
#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-#else
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
-#define USER_DS MAKE_MM_SEG(0xFFFFFFFF)
-#endif /* CONFIG_MMU */
-
#define get_ds() (KERNEL_DS)
-#ifdef CONFIG_MMU
#define get_fs() (current_thread_info()->addr_limit)
#define set_fs(x) (current_thread_info()->addr_limit = (x))
-#else
+
+#else /* not CONFIG_MMU */
+
+#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS MAKE_MM_SEG(0xFFFFFFFF)
+#define get_ds() (KERNEL_DS)
+
static inline mm_segment_t get_fs(void)
{
- return USER_DS;
+ return USER_DS;
}
static inline void set_fs(mm_segment_t s)
{
}
-#endif /* CONFIG_MMU */
+
+#endif /* not CONFIG_MMU */
#define segment_eq(a,b) ((a).seg == (b).seg)
" subx %0, %0\n" \
" cmpu %4, %1\n" \
" subx %0, %5\n" \
- : "=&r"(flag), "=r"(sum) \
- : "1"(addr), "r"((int)(size)), \
- "r"(current_thread_info()->addr_limit.seg), "r"(0) \
+ : "=&r" (flag), "=r" (sum) \
+ : "1" (addr), "r" ((int)(size)), \
+ "r" (current_thread_info()->addr_limit.seg), "r" (0) \
: "cbit" ); \
flag; })
#else
static inline int access_ok(int type, const void *addr, unsigned long size)
{
- extern unsigned long memory_start, memory_end;
- unsigned long val = (unsigned long)addr;
+ extern unsigned long memory_start, memory_end;
+ unsigned long val = (unsigned long)addr;
- return ((val >= memory_start) && ((val + size) < memory_end));
+ return ((val >= memory_start) && ((val + size) < memory_end));
}
#endif /* CONFIG_MMU */
* accesses to the same area of user memory).
*/
-extern void __get_user_1(void);
-extern void __get_user_2(void);
-extern void __get_user_4(void);
-
-#ifndef MODULE
-#define __get_user_x(size,ret,x,ptr) \
- __asm__ __volatile__( \
- " mv r0, %0\n" \
- " mv r1, %1\n" \
- " bl __get_user_" #size "\n" \
- " mv %0, r0\n" \
- " mv %1, r1\n" \
- : "=r"(ret), "=r"(x) \
- : "0"(ptr) \
- : "r0", "r1", "r14" )
-#else /* MODULE */
-/*
- * Use "jl" instead of "bl" for MODULE
- */
-#define __get_user_x(size,ret,x,ptr) \
- __asm__ __volatile__( \
- " mv r0, %0\n" \
- " mv r1, %1\n" \
- " seth lr, #high(__get_user_" #size ")\n" \
- " or3 lr, lr, #low(__get_user_" #size ")\n" \
- " jl lr\n" \
- " mv %0, r0\n" \
- " mv %1, r1\n" \
- : "=r"(ret), "=r"(x) \
- : "0"(ptr) \
- : "r0", "r1", "r14" )
-#endif
-
/* Careful: we have to cast the result to the type of the pointer for sign
reasons */
/**
* On error, the variable @x is set to zero.
*/
#define get_user(x,ptr) \
-({ int __ret_gu; \
- unsigned long __val_gu; \
- __chk_user_ptr(ptr); \
- switch(sizeof (*(ptr))) { \
- case 1: __get_user_x(1,__ret_gu,__val_gu,ptr); break; \
- case 2: __get_user_x(2,__ret_gu,__val_gu,ptr); break; \
- case 4: __get_user_x(4,__ret_gu,__val_gu,ptr); break; \
- default: __get_user_x(X,__ret_gu,__val_gu,ptr); break; \
- } \
- (x) = (__typeof__(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_bad(void);
+ __get_user_check((x),(ptr),sizeof(*(ptr)))
/**
* put_user: - Write a simple value into user space.
* Returns zero on success, or -EFAULT on error.
*/
#define put_user(x,ptr) \
- __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-
+ __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
/**
* __get_user: - Get a simple variable from user space, with less checking.
* On error, the variable @x is set to zero.
*/
#define __get_user(x,ptr) \
- __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+ __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __get_user_nocheck(x,ptr,size) \
+({ \
+ long __gu_err = 0; \
+ unsigned long __gu_val; \
+ might_sleep(); \
+ __get_user_size(__gu_val,(ptr),(size),__gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_check(x,ptr,size) \
+({ \
+ long __gu_err = -EFAULT; \
+ unsigned long __gu_val = 0; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ might_sleep(); \
+ if (access_ok(VERIFY_READ,__gu_addr,size)) \
+ __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: __get_user_asm(x,ptr,retval,"ub"); break; \
+ case 2: __get_user_asm(x,ptr,retval,"uh"); break; \
+ case 4: __get_user_asm(x,ptr,retval,""); break; \
+ default: (x) = __get_user_bad(); \
+ } \
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype) \
+ __asm__ __volatile__( \
+ " .fillinsn\n" \
+ "1: ld"itype" %1,@%2\n" \
+ " .fillinsn\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ " .balign 4\n" \
+ "3: ldi %0,%3\n" \
+ " seth r14,#high(2b)\n" \
+ " or3 r14,r14,#low(2b)\n" \
+ " jmp r14\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : "=&r" (err), "=&r" (x) \
+ : "r" (addr), "i" (-EFAULT), "0" (err) \
+ : "r14", "memory")
/**
* __put_user: - Write a simple value into user space, with less checking.
* Returns zero on success, or -EFAULT on error.
*/
#define __put_user(x,ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+ __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
#define __put_user_nocheck(x,ptr,size) \
({ \
long __pu_err; \
+ might_sleep(); \
__put_user_size((x),(ptr),(size),__pu_err); \
__pu_err; \
})
})
#if defined(__LITTLE_ENDIAN__)
-#define __put_user_u64(x, addr, err) \
- __asm__ __volatile__( \
- " .fillinsn\n" \
- "1: st %L1,@%2\n" \
- " .fillinsn\n" \
- "2: st %H1,@(4,%2)\n" \
- " .fillinsn\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- " .balign 4\n" \
- "4: ldi %0,%3\n" \
- " seth r14,#high(3b)\n" \
- " or3 r14,r14,#low(3b)\n" \
- " jmp r14\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 1b,4b\n" \
- " .long 2b,4b\n" \
- ".previous" \
- : "=&r"(err) \
- : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
+#define __put_user_u64(x, addr, err) \
+ __asm__ __volatile__( \
+ " .fillinsn\n" \
+ "1: st %L1,@%2\n" \
+ " .fillinsn\n" \
+ "2: st %H1,@(4,%2)\n" \
+ " .fillinsn\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ " .balign 4\n" \
+ "4: ldi %0,%3\n" \
+ " seth r14,#high(3b)\n" \
+ " or3 r14,r14,#low(3b)\n" \
+ " jmp r14\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b,4b\n" \
+ " .long 2b,4b\n" \
+ ".previous" \
+ : "=&r" (err) \
+ : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
: "r14", "memory")
#elif defined(__BIG_ENDIAN__)
" .long 1b,4b\n" \
" .long 2b,4b\n" \
".previous" \
- : "=&r"(err) \
- : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
+ : "=&r" (err) \
+ : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
: "r14", "memory")
#else
#error no endian defined
#endif
+extern void __put_user_bad(void);
+
#define __put_user_size(x,ptr,size,retval) \
do { \
retval = 0; \
" .balign 4\n" \
" .long 1b,3b\n" \
".previous" \
- : "=&r"(err) \
- : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err) \
- : "r14", "memory")
-
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val,(ptr),(size),__gu_err); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: __get_user_asm(x,ptr,retval,"ub"); break; \
- case 2: __get_user_asm(x,ptr,retval,"uh"); break; \
- case 4: __get_user_asm(x,ptr,retval,""); break; \
- default: (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype) \
- __asm__ __volatile__( \
- " .fillinsn\n" \
- "1: ld"itype" %1,@%2\n" \
- " .fillinsn\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- " .balign 4\n" \
- "3: ldi %0,%3\n" \
- " seth r14,#high(2b)\n" \
- " or3 r14,r14,#low(2b)\n" \
- " jmp r14\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 1b,3b\n" \
- ".previous" \
- : "=&r"(err), "=&r"(x) \
- : "r"(addr), "i"(-EFAULT), "0"(err) \
+ : "=&r" (err) \
+ : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
: "r14", "memory")
/*
* anything, so this is accurate.
*/
-
/*
* Copy To/From Userspace
*/
" .long 2b,9b\n" \
" .long 3b,9b\n" \
".previous\n" \
- : "=&r"(__dst), "=&r"(__src), "=&r"(size), "=&r"(__c) \
- : "0"(to), "1"(from), "2"(size), "3"(size / 4) \
+ : "=&r" (__dst), "=&r" (__src), "=&r" (size), \
+ "=&r" (__c) \
+ : "0" (to), "1" (from), "2" (size), "3" (size / 4) \
: "r14", "memory"); \
} while (0)
" .long 2b,7b\n" \
" .long 3b,7b\n" \
".previous\n" \
- : "=&r"(__dst), "=&r"(__src), "=&r"(size), "=&r"(__c) \
- : "0"(to), "1"(from), "2"(size), "3"(size / 4) \
+ : "=&r" (__dst), "=&r" (__src), "=&r" (size), \
+ "=&r" (__c) \
+ : "0" (to), "1" (from), "2" (size), "3" (size / 4) \
: "r14", "memory"); \
} while (0)
#define copy_from_user(to,from,n) \
({ \
might_sleep(); \
-__generic_copy_from_user((to),(from),(n)); \
+ __generic_copy_from_user((to),(from),(n)); \
})
long __must_check strncpy_from_user(char *dst, const char __user *src,
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff