[WATCHDOG] wdt.c: remove #ifdef CONFIG_WDT_501

Change the wdt.c watchdog driver so that the code is the same for
both the WDT500 as the WDT501-P card. The selection of the card
is now being done via the module parameter: 'type' instead of the
config option CONFIG_WDT_501.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 325c10ff6a2cd2dc616228bead8fc5c8cdb7f034..55f64af072a430d4ce9337baa6b8dc6807ec3c4f 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -940,21 +940,6 @@ config WDT
          To compile this driver as a module, choose M here: the
          module will be called wdt.
 
-config WDT_501
-       bool "WDT501 features"
-       depends on WDT
-       help
-         Saying Y here and creating a character special file /dev/temperature
-         with major number 10 and minor number 131 ("man mknod") will give
-         you a thermometer inside your computer: reading from
-         /dev/temperature yields one byte, the temperature in degrees
-         Fahrenheit. This works only if you have a WDT501P watchdog board
-         installed.
-
-         If you want to enable the Fan Tachometer on the WDT501P, then you
-         can do this via the tachometer parameter. Only do this if you have a
-         fan tachometer actually set up.
-
 #
 # PCI-based Watchdog Cards
 #

diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
index eddb9187e7b6ba193db5ad24b23a14bf3ff67e07..3bbefe9a2634d5af1e432ed4496f7294e360e64a 100644 (file)
--- a/drivers/watchdog/wdt.c
+++ b/drivers/watchdog/wdt.c
@@ -1,5 +1,5 @@
 /*
- *     Industrial Computer Source WDT500/501 driver
+ *     Industrial Computer Source WDT501 driver
  *
  *     (c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
  *                                             All Rights Reserved.
@@ -82,14 +82,16 @@ MODULE_PARM_DESC(io, "WDT io port (default=0x240)");
 module_param(irq, int, 0);
 MODULE_PARM_DESC(irq, "WDT irq (default=11)");
 
-#ifdef CONFIG_WDT_501
 /* Support for the Fan Tachometer on the WDT501-P */
 static int tachometer;
-
 module_param(tachometer, int, 0);
 MODULE_PARM_DESC(tachometer,
                "WDT501-P Fan Tachometer support (0=disable, default=0)");
-#endif /* CONFIG_WDT_501 */
+
+static int type = 500;
+module_param(type, int, 0);
+MODULE_PARM_DESC(type,
+               "WDT501-P Card type (500 or 501 , default=500)");
 
 /*
  *     Programming support
@@ -158,7 +160,7 @@ static int wdt_stop(void)
  *     reloading the cascade counter.
  */
 
-static int wdt_ping(void)
+static void wdt_ping(void)
 {
        unsigned long flags;
        spin_lock_irqsave(&wdt_lock, flags);
@@ -169,7 +171,6 @@ static int wdt_ping(void)
        wdt_ctr_load(1, wd_heartbeat);  /* Heartbeat */
        outb_p(0, WDT_DC);              /* Enable watchdog */
        spin_unlock_irqrestore(&wdt_lock, flags);
-       return 0;
 }
 
 /**
@@ -193,7 +194,6 @@ static int wdt_set_heartbeat(int t)
 
 /**
  *     wdt_get_status:
- *     @status:                the new status.
  *
  *     Extract the status information from a WDT watchdog device. There are
  *     several board variants so we have to know which bits are valid. Some
@@ -202,36 +202,35 @@ static int wdt_set_heartbeat(int t)
  *     we then map the bits onto the status ioctl flags.
  */
 
-static int wdt_get_status(int *status)
+static int wdt_get_status(void)
 {
        unsigned char new_status;
+       int status = 0;
        unsigned long flags;
 
        spin_lock_irqsave(&wdt_lock, flags);
        new_status = inb_p(WDT_SR);
        spin_unlock_irqrestore(&wdt_lock, flags);
 
-       *status = 0;
        if (new_status & WDC_SR_ISOI0)
-               *status |= WDIOF_EXTERN1;
+               status |= WDIOF_EXTERN1;
        if (new_status & WDC_SR_ISII1)
-               *status |= WDIOF_EXTERN2;
-#ifdef CONFIG_WDT_501
-       if (!(new_status & WDC_SR_TGOOD))
-               *status |= WDIOF_OVERHEAT;
-       if (!(new_status & WDC_SR_PSUOVER))
-               *status |= WDIOF_POWEROVER;
-       if (!(new_status & WDC_SR_PSUUNDR))
-               *status |= WDIOF_POWERUNDER;
-       if (tachometer) {
-               if (!(new_status & WDC_SR_FANGOOD))
-                       *status |= WDIOF_FANFAULT;
+               status |= WDIOF_EXTERN2;
+       if (type == 501) {
+               if (!(new_status & WDC_SR_TGOOD))
+                       status |= WDIOF_OVERHEAT;
+               if (!(new_status & WDC_SR_PSUOVER))
+                       status |= WDIOF_POWEROVER;
+               if (!(new_status & WDC_SR_PSUUNDR))
+                       status |= WDIOF_POWERUNDER;
+               if (tachometer) {
+                       if (!(new_status & WDC_SR_FANGOOD))
+                               status |= WDIOF_FANFAULT;
+               }
        }
-#endif /* CONFIG_WDT_501 */
-       return 0;
+       return status;
 }
 
-#ifdef CONFIG_WDT_501
 /**
  *     wdt_get_temperature:
  *
@@ -239,7 +238,7 @@ static int wdt_get_status(int *status)
  *     farenheit. It was designed by an imperial measurement luddite.
  */
 
-static int wdt_get_temperature(int *temperature)
+static int wdt_get_temperature(void)
 {
        unsigned short c;
        unsigned long flags;
@@ -247,10 +246,18 @@ static int wdt_get_temperature(int *temperature)
        spin_lock_irqsave(&wdt_lock, flags);
        c = inb_p(WDT_RT);
        spin_unlock_irqrestore(&wdt_lock, flags);
-       *temperature = (c * 11 / 15) + 7;
-       return 0;
+       return (c * 11 / 15) + 7;
+}
+
+static void wdt_decode_501(int status)
+{
+       if (!(status & WDC_SR_TGOOD))
+               printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT));
+       if (!(status & WDC_SR_PSUOVER))
+               printk(KERN_CRIT "PSU over voltage.\n");
+       if (!(status & WDC_SR_PSUUNDR))
+               printk(KERN_CRIT "PSU under voltage.\n");
 }
-#endif /* CONFIG_WDT_501 */
 
 /**
  *     wdt_interrupt:
@@ -275,18 +282,13 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id)
 
        printk(KERN_CRIT "WDT status %d\n", status);
 
-#ifdef CONFIG_WDT_501
-       if (!(status & WDC_SR_TGOOD))
-               printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT));
-       if (!(status & WDC_SR_PSUOVER))
-               printk(KERN_CRIT "PSU over voltage.\n");
-       if (!(status & WDC_SR_PSUUNDR))
-               printk(KERN_CRIT "PSU under voltage.\n");
-       if (tachometer) {
-               if (!(status & WDC_SR_FANGOOD))
-                       printk(KERN_CRIT "Possible fan fault.\n");
+       if (type == 501) {
+               wdt_decode_501(status);
+               if (tachometer) {
+                       if (!(status & WDC_SR_FANGOOD))
+                               printk(KERN_CRIT "Possible fan fault.\n");
+               }
        }
-#endif /* CONFIG_WDT_501 */
        if (!(status & WDC_SR_WCCR)) {
 #ifdef SOFTWARE_REBOOT
 #ifdef ONLY_TESTING
@@ -366,17 +368,18 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
        /* Add options according to the card we have */
        ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2);
-#ifdef CONFIG_WDT_501
-       ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|WDIOF_POWEROVER);
-       if (tachometer)
-               ident.options |= WDIOF_FANFAULT;
-#endif /* CONFIG_WDT_501 */
+       if (type == 501) {
+               ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|
+                                                       WDIOF_POWEROVER);
+               if (tachometer)
+                       ident.options |= WDIOF_FANFAULT;
+       }
 
        switch (cmd) {
        case WDIOC_GETSUPPORT:
                return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
        case WDIOC_GETSTATUS:
-               wdt_get_status(&status);
+               status = wdt_get_status();
                return put_user(status, p);
        case WDIOC_GETBOOTSTATUS:
                return put_user(0, p);
@@ -446,7 +449,6 @@ static int wdt_release(struct inode *inode, struct file *file)
        return 0;
 }
 
-#ifdef CONFIG_WDT_501
 /**
  *     wdt_temp_read:
  *     @file: file handle to the watchdog board
@@ -461,10 +463,7 @@ static int wdt_release(struct inode *inode, struct file *file)
 static ssize_t wdt_temp_read(struct file *file, char __user *buf,
                                                size_t count, loff_t *ptr)
 {
-       int temperature;
-
-       if (wdt_get_temperature(&temperature))
-               return -EFAULT;
+       int temperature = wdt_get_temperature();
 
        if (copy_to_user(buf, &temperature, 1))
                return -EFAULT;
@@ -497,7 +496,6 @@ static int wdt_temp_release(struct inode *inode, struct file *file)
 {
        return 0;
 }
-#endif /* CONFIG_WDT_501 */
 
 /**
  *     notify_sys:
@@ -539,7 +537,6 @@ static struct miscdevice wdt_miscdev = {
        .fops   = &wdt_fops,
 };
 
-#ifdef CONFIG_WDT_501
 static const struct file_operations wdt_temp_fops = {
        .owner          = THIS_MODULE,
        .llseek         = no_llseek,
@@ -553,7 +550,6 @@ static struct miscdevice temp_miscdev = {
        .name   = "temperature",
        .fops   = &wdt_temp_fops,
 };
-#endif /* CONFIG_WDT_501 */
 
 /*
  *     The WDT card needs to learn about soft shutdowns in order to
@@ -577,9 +573,8 @@ static struct notifier_block wdt_notifier = {
 static void __exit wdt_exit(void)
 {
        misc_deregister(&wdt_miscdev);
-#ifdef CONFIG_WDT_501
-       misc_deregister(&temp_miscdev);
-#endif /* CONFIG_WDT_501 */
+       if (type == 501)
+               misc_deregister(&temp_miscdev);
        unregister_reboot_notifier(&wdt_notifier);
        free_irq(irq, NULL);
        release_region(io, 8);
@@ -597,12 +592,17 @@ static int __init wdt_init(void)
 {
        int ret;
 
+       if (type != 500 && type != 501) {
+               printk(KERN_ERR "wdt: unknown card type '%d'.\n", type);
+               return -ENODEV;
+       }
+
        /* Check that the heartbeat value is within it's range;
           if not reset to the default */
        if (wdt_set_heartbeat(heartbeat)) {
                wdt_set_heartbeat(WD_TIMO);
-               printk(KERN_INFO "wdt: heartbeat value must be 0 < heartbeat < 65536, using %d\n",
-                       WD_TIMO);
+               printk(KERN_INFO "wdt: heartbeat value must be "
+                       "0 < heartbeat < 65536, using %d\n", WD_TIMO);
        }
 
        if (!request_region(io, 8, "wdt501p")) {
@@ -625,15 +625,14 @@ static int __init wdt_init(void)
                goto outirq;
        }
 
-#ifdef CONFIG_WDT_501
-       ret = misc_register(&temp_miscdev);
-       if (ret) {
-               printk(KERN_ERR
-                       "wdt: cannot register miscdev on minor=%d (err=%d)\n",
-                                                       TEMP_MINOR, ret);
-               goto outrbt;
+       if (type == 501) {
+               ret = misc_register(&temp_miscdev);
+               if (ret) {
+                       printk(KERN_ERR "wdt: cannot register miscdev "
+                               "on minor=%d (err=%d)\n", TEMP_MINOR, ret);
+                       goto outrbt;
+               }
        }
-#endif /* CONFIG_WDT_501 */
 
        ret = misc_register(&wdt_miscdev);
        if (ret) {
@@ -643,28 +642,25 @@ static int __init wdt_init(void)
                goto outmisc;
        }
 
-       ret = 0;
-       printk(KERN_INFO "WDT500/501-P driver 0.10 at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n",
+       printk(KERN_INFO "WDT500/501-P driver 0.10 "
+               "at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n",
                io, irq, heartbeat, nowayout);
-#ifdef CONFIG_WDT_501
-       printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
+       if (type == 501)
+               printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
                                (tachometer ? "Enabled" : "Disabled"));
-#endif /* CONFIG_WDT_501 */
-
-out:
-       return ret;
+       return 0;
 
 outmisc:
-#ifdef CONFIG_WDT_501
-       misc_deregister(&temp_miscdev);
+       if (type == 501)
+               misc_deregister(&temp_miscdev);
 outrbt:
-#endif /* CONFIG_WDT_501 */
        unregister_reboot_notifier(&wdt_notifier);
 outirq:
        free_irq(irq, NULL);
 outreg:
        release_region(io, 8);
-       goto out;
+out:
+       return ret;
 }
 
 module_init(wdt_init);