USB: serial: keyspan: remove dbg() usage

dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the keyspan
driver and uses dev_dbg() instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f0d4f3fcf4f7dc372ee52f1adfa01ed50b755df4..0d37581fabb179f465fd750151d8ba8ad7585f01 100644 (file)
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -165,7 +165,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
           so other rates can be generated if desired. */
        baud_rate = tty_get_baud_rate(tty);
        /* If no match or invalid, don't change */
-       if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
+       if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
                                NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
                /* FIXME - more to do here to ensure rate changes cleanly */
                /* FIXME - calcuate exact rate from divisor ? */
@@ -241,8 +241,8 @@ static int keyspan_write(struct tty_struct *tty,
                dataOffset = 1;
        }
 
-       dbg("%s - for port %d (%d chars), flip=%d",
-           __func__, port->number, count, p_priv->out_flip);
+       dev_dbg(&port->dev, "%s - for port %d (%d chars), flip=%d\n",
+               __func__, port->number, count, p_priv->out_flip);
 
        for (left = count; left > 0; left -= todo) {
                todo = left;
@@ -255,11 +255,11 @@ static int keyspan_write(struct tty_struct *tty,
                this_urb = p_priv->out_urbs[flip];
                if (this_urb == NULL) {
                        /* no bulk out, so return 0 bytes written */
-                       dbg("%s - no output urb :(", __func__);
+                       dev_dbg(&port->dev, "%s - no output urb :(\n", __func__);
                        return count;
                }
 
-               dbg("%s - endpoint %d flip %d",
+               dev_dbg(&port->dev, "%s - endpoint %d flip %d\n",
                        __func__, usb_pipeendpoint(this_urb->pipe), flip);
 
                if (this_urb->status == -EINPROGRESS) {
@@ -282,7 +282,7 @@ static int keyspan_write(struct tty_struct *tty,
 
                err = usb_submit_urb(this_urb, GFP_ATOMIC);
                if (err != 0)
-                       dbg("usb_submit_urb(write bulk) failed (%d)", err);
+                       dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err);
                p_priv->tx_start_time[flip] = jiffies;
 
                /* Flip for next time if usa26 or usa28 interface
@@ -305,8 +305,8 @@ static void usa26_indat_callback(struct urb *urb)
        endpoint = usb_pipeendpoint(urb->pipe);
 
        if (status) {
-               dbg("%s - nonzero status: %x on endpoint %d.",
-                   __func__, status, endpoint);
+               dev_dbg(&urb->dev->dev,"%s - nonzero status: %x on endpoint %d.\n",
+                       __func__, status, endpoint);
                return;
        }
 
@@ -325,7 +325,7 @@ static void usa26_indat_callback(struct urb *urb)
                                tty_insert_flip_char(tty, data[i], err);
                } else {
                        /* some bytes had errors, every byte has status */
-                       dbg("%s - RX error!!!!", __func__);
+                       dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
                        for (i = 0; i + 1 < urb->actual_length; i += 2) {
                                int stat = data[i], flag = 0;
                                if (stat & RXERROR_OVERRUN)
@@ -345,7 +345,7 @@ static void usa26_indat_callback(struct urb *urb)
        /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 }
 
 /* Outdat handling is common for all devices */
@@ -356,7 +356,7 @@ static void usa2x_outdat_callback(struct urb *urb)
 
        port =  urb->context;
        p_priv = usb_get_serial_port_data(port);
-       dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
+       dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]);
 
        usb_serial_port_softint(port);
 }
@@ -374,7 +374,7 @@ static void usa26_outcont_callback(struct urb *urb)
        p_priv = usb_get_serial_port_data(port);
 
        if (p_priv->resend_cont) {
-               dbg("%s - sending setup", __func__);
+               dev_dbg(&port->dev, "%s - sending setup\n", __func__);
                keyspan_usa26_send_setup(port->serial, port,
                                                p_priv->resend_cont - 1);
        }
@@ -394,20 +394,22 @@ static void       usa26_instat_callback(struct urb *urb)
        serial =  urb->context;
 
        if (status) {
-               dbg("%s - nonzero status: %x", __func__, status);
+               dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
                return;
        }
        if (urb->actual_length != 9) {
-               dbg("%s - %d byte report??", __func__, urb->actual_length);
+               dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
                goto exit;
        }
 
        msg = (struct keyspan_usa26_portStatusMessage *)data;
 
 #if 0
-       dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d",
-           __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff,
-           msg->_txXoff, msg->rxEnabled, msg->controlResponse);
+       dev_dbg(&urb->dev->dev,
+               "%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d",
+               __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr,
+               msg->ri, msg->_txOff, msg->_txXoff, msg->rxEnabled,
+               msg->controlResponse);
 #endif
 
        /* Now do something useful with the data */
@@ -415,7 +417,7 @@ static void usa26_instat_callback(struct urb *urb)
 
        /* Check port number from message and retrieve private data */
        if (msg->port >= serial->num_ports) {
-               dbg("%s - Unexpected port number %d", __func__, msg->port);
+               dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
                goto exit;
        }
        port = serial->port[msg->port];
@@ -438,7 +440,7 @@ static void usa26_instat_callback(struct urb *urb)
        /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 exit: ;
 }
 
@@ -465,8 +467,8 @@ static void usa28_indat_callback(struct urb *urb)
 
        do {
                if (status) {
-                       dbg("%s - nonzero status: %x on endpoint %d.",
-                           __func__, status, usb_pipeendpoint(urb->pipe));
+                       dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",
+                               __func__, status, usb_pipeendpoint(urb->pipe));
                        return;
                }
 
@@ -484,7 +486,7 @@ static void usa28_indat_callback(struct urb *urb)
                /* Resubmit urb so we continue receiving */
                err = usb_submit_urb(urb, GFP_ATOMIC);
                if (err != 0)
-                       dbg("%s - resubmit read urb failed. (%d)",
+                       dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n",
                                                        __func__, err);
                p_priv->in_flip ^= 1;
 
@@ -505,7 +507,7 @@ static void usa28_outcont_callback(struct urb *urb)
        p_priv = usb_get_serial_port_data(port);
 
        if (p_priv->resend_cont) {
-               dbg("%s - sending setup", __func__);
+               dev_dbg(&port->dev, "%s - sending setup\n", __func__);
                keyspan_usa28_send_setup(port->serial, port,
                                                p_priv->resend_cont - 1);
        }
@@ -526,25 +528,28 @@ static void       usa28_instat_callback(struct urb *urb)
        serial =  urb->context;
 
        if (status) {
-               dbg("%s - nonzero status: %x", __func__, status);
+               dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
                return;
        }
 
        if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
-               dbg("%s - bad length %d", __func__, urb->actual_length);
+               dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
                goto exit;
        }
 
-       /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__
-           data[0], data[1], data[2], data[3], data[4], data[5],
-           data[6], data[7], data[8], data[9], data[10], data[11]);*/
+       /*
+       dev_dbg(&urb->dev->dev,
+               "%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__,
+               data[0], data[1], data[2], data[3], data[4], data[5],
+               data[6], data[7], data[8], data[9], data[10], data[11]);
+       */
 
        /* Now do something useful with the data */
        msg = (struct keyspan_usa28_portStatusMessage *)data;
 
        /* Check port number from message and retrieve private data */
        if (msg->port >= serial->num_ports) {
-               dbg("%s - Unexpected port number %d", __func__, msg->port);
+               dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
                goto exit;
        }
        port = serial->port[msg->port];
@@ -567,7 +572,7 @@ static void usa28_instat_callback(struct urb *urb)
                /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 exit: ;
 }
 
@@ -589,7 +594,7 @@ static void usa49_glocont_callback(struct urb *urb)
                p_priv = usb_get_serial_port_data(port);
 
                if (p_priv->resend_cont) {
-                       dbg("%s - sending setup", __func__);
+                       dev_dbg(&port->dev, "%s - sending setup\n", __func__);
                        keyspan_usa49_send_setup(serial, port,
                                                p_priv->resend_cont - 1);
                        break;
@@ -613,27 +618,29 @@ static void       usa49_instat_callback(struct urb *urb)
        serial =  urb->context;
 
        if (status) {
-               dbg("%s - nonzero status: %x", __func__, status);
+               dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
                return;
        }
 
        if (urb->actual_length !=
                        sizeof(struct keyspan_usa49_portStatusMessage)) {
-               dbg("%s - bad length %d", __func__, urb->actual_length);
+               dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
                goto exit;
        }
 
-       /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__,
-           data[0], data[1], data[2], data[3], data[4], data[5],
-           data[6], data[7], data[8], data[9], data[10]);*/
+       /*
+       dev_dbg(&urb->dev->dev, "%s: %x %x %x %x %x %x %x %x %x %x %x",
+               __func__, data[0], data[1], data[2], data[3], data[4],
+               data[5], data[6], data[7], data[8], data[9], data[10]);
+       */
 
        /* Now do something useful with the data */
        msg = (struct keyspan_usa49_portStatusMessage *)data;
 
        /* Check port number from message and retrieve private data */
        if (msg->portNumber >= serial->num_ports) {
-               dbg("%s - Unexpected port number %d",
-                                       __func__, msg->portNumber);
+               dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
+                       __func__, msg->portNumber);
                goto exit;
        }
        port = serial->port[msg->portNumber];
@@ -656,7 +663,7 @@ static void usa49_instat_callback(struct urb *urb)
        /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 exit:  ;
 }
 
@@ -676,8 +683,8 @@ static void usa49_indat_callback(struct urb *urb)
        endpoint = usb_pipeendpoint(urb->pipe);
 
        if (status) {
-               dbg("%s - nonzero status: %x on endpoint %d.", __func__,
-                   status, endpoint);
+               dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",
+                       __func__, status, endpoint);
                return;
        }
 
@@ -710,7 +717,7 @@ static void usa49_indat_callback(struct urb *urb)
        /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 }
 
 static void usa49wg_indat_callback(struct urb *urb)
@@ -725,7 +732,7 @@ static void usa49wg_indat_callback(struct urb *urb)
        serial = urb->context;
 
        if (status) {
-               dbg("%s - nonzero status: %x", __func__, status);
+               dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
                return;
        }
 
@@ -738,7 +745,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 
                        /* Check port number from message*/
                        if (data[i] >= serial->num_ports) {
-                               dbg("%s - Unexpected port number %d",
+                               dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n",
                                        __func__, data[i]);
                                return;
                        }
@@ -778,7 +785,7 @@ static void usa49wg_indat_callback(struct urb *urb)
        /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 }
 
 /* not used, usa-49 doesn't have per-port control endpoints */
@@ -799,7 +806,7 @@ static void usa90_indat_callback(struct urb *urb)
        endpoint = usb_pipeendpoint(urb->pipe);
 
        if (status) {
-               dbg("%s - nonzero status: %x on endpoint %d.",
+               dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n",
                    __func__, status, endpoint);
                return;
        }
@@ -828,7 +835,7 @@ static void usa90_indat_callback(struct urb *urb)
                                                                        err);
                        }  else {
                        /* some bytes had errors, every byte has status */
-                               dbg("%s - RX error!!!!", __func__);
+                               dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
                                for (i = 0; i + 1 < urb->actual_length; i += 2) {
                                        int stat = data[i], flag = 0;
                                        if (stat & RXERROR_OVERRUN)
@@ -850,7 +857,7 @@ static void usa90_indat_callback(struct urb *urb)
        /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 }
 
 
@@ -868,11 +875,11 @@ static void       usa90_instat_callback(struct urb *urb)
        serial =  urb->context;
 
        if (status) {
-               dbg("%s - nonzero status: %x", __func__, status);
+               dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
                return;
        }
        if (urb->actual_length < 14) {
-               dbg("%s - %d byte report??", __func__, urb->actual_length);
+               dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length);
                goto exit;
        }
 
@@ -900,7 +907,7 @@ static void usa90_instat_callback(struct urb *urb)
        /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 exit:
        ;
 }
@@ -914,7 +921,7 @@ static void usa90_outcont_callback(struct urb *urb)
        p_priv = usb_get_serial_port_data(port);
 
        if (p_priv->resend_cont) {
-               dbg("%s - sending setup", __func__);
+               dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__);
                keyspan_usa90_send_setup(port->serial, port,
                                                p_priv->resend_cont - 1);
        }
@@ -935,13 +942,13 @@ static void       usa67_instat_callback(struct urb *urb)
        serial = urb->context;
 
        if (status) {
-               dbg("%s - nonzero status: %x", __func__, status);
+               dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status);
                return;
        }
 
        if (urb->actual_length !=
                        sizeof(struct keyspan_usa67_portStatusMessage)) {
-               dbg("%s - bad length %d", __func__, urb->actual_length);
+               dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length);
                return;
        }
 
@@ -951,7 +958,7 @@ static void usa67_instat_callback(struct urb *urb)
 
        /* Check port number from message and retrieve private data */
        if (msg->port >= serial->num_ports) {
-               dbg("%s - Unexpected port number %d", __func__, msg->port);
+               dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port);
                return;
        }
 
@@ -973,7 +980,7 @@ static void usa67_instat_callback(struct urb *urb)
        /* Resubmit urb so we continue receiving */
        err = usb_submit_urb(urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - resubmit read urb failed. (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err);
 }
 
 static void usa67_glocont_callback(struct urb *urb)
@@ -989,7 +996,7 @@ static void usa67_glocont_callback(struct urb *urb)
                p_priv = usb_get_serial_port_data(port);
 
                if (p_priv->resend_cont) {
-                       dbg("%s - sending setup", __func__);
+                       dev_dbg(&port->dev, "%s - sending setup\n", __func__);
                        keyspan_usa67_send_setup(serial, port,
                                                p_priv->resend_cont - 1);
                        break;
@@ -1068,8 +1075,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
                usb_clear_halt(urb->dev, urb->pipe);
                err = usb_submit_urb(urb, GFP_KERNEL);
                if (err != 0)
-                       dbg("%s - submit urb %d failed (%d)",
-                                                       __func__, i, err);
+                       dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err);
        }
 
        /* Reset low level data toggle on out endpoints */
@@ -1092,7 +1098,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
                baud_rate = tty_get_baud_rate(tty);
                /* If no match or invalid, leave as default */
                if (baud_rate >= 0
-                   && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
+                   && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk,
                                        NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
                        p_priv->baud = baud_rate;
                }
@@ -1142,7 +1148,7 @@ static void keyspan_close(struct usb_serial_port *port)
        }
 
        /*while (p_priv->outcont_urb->status == -EINPROGRESS) {
-               dbg("%s - urb in progress", __func__);
+               dev_dbg(&port->dev, "%s - urb in progress\n", __func__);
        }*/
 
        p_priv->out_flip = 0;
@@ -1167,13 +1173,13 @@ static int keyspan_fake_startup(struct usb_serial *serial)
        char                            *fw_name;
        const struct firmware           *fw;
 
-       dbg("Keyspan startup version %04x product %04x",
-           le16_to_cpu(serial->dev->descriptor.bcdDevice),
-           le16_to_cpu(serial->dev->descriptor.idProduct));
+       dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n",
+               le16_to_cpu(serial->dev->descriptor.bcdDevice),
+               le16_to_cpu(serial->dev->descriptor.idProduct));
 
        if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000)
                                                                != 0x8000) {
-               dbg("Firmware already loaded.  Quitting.");
+               dev_dbg(&serial->dev->dev, "Firmware already loaded.  Quitting.\n");
                return 1;
        }
 
@@ -1238,7 +1244,7 @@ static int keyspan_fake_startup(struct usb_serial *serial)
                return 1;
        }
 
-       dbg("Uploading Keyspan %s firmware.", fw_name);
+       dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);
 
                /* download the firmware image */
        response = ezusb_set_reset(serial->dev, 1);
@@ -1296,10 +1302,10 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
        if (endpoint == -1)
                return NULL;            /* endpoint not needed */
 
-       dbg("%s - alloc for endpoint %d.", __func__, endpoint);
+       dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint);
        urb = usb_alloc_urb(0, GFP_KERNEL);             /* No ISO */
        if (urb == NULL) {
-               dbg("%s - alloc for endpoint %d failed.", __func__, endpoint);
+               dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d failed.\n", __func__, endpoint);
                return NULL;
        }
 
@@ -1332,7 +1338,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
                return NULL;
        }
 
-       dbg("%s - using urb %p for %s endpoint %x",
+       dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n",
            __func__, urb, ep_type_name, endpoint);
        return urb;
 }
@@ -1464,14 +1470,15 @@ static void keyspan_setup_urbs(struct usb_serial *serial)
 }
 
 /* usa19 function doesn't require prescaler */
-static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
+static int keyspan_usa19_calc_baud(struct usb_serial_port *port,
+                                  u32 baud_rate, u32 baudclk, u8 *rate_hi,
                                   u8 *rate_low, u8 *prescaler, int portnum)
 {
        u32     b16,    /* baud rate times 16 (actual rate used internally) */
                div,    /* divisor */
                cnt;    /* inverse of divisor (programmed into 8051) */
 
-       dbg("%s - %d.", __func__, baud_rate);
+       dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
 
        /* prevent divide by zero...  */
        b16 = baud_rate * 16L;
@@ -1498,19 +1505,20 @@ static int keyspan_usa19_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
        if (rate_hi)
                *rate_hi = (u8) ((cnt >> 8) & 0xff);
        if (rate_low && rate_hi)
-               dbg("%s - %d %02x %02x.",
+               dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
                                __func__, baud_rate, *rate_hi, *rate_low);
        return KEYSPAN_BAUD_RATE_OK;
 }
 
 /* usa19hs function doesn't require prescaler */
-static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
-                                  u8 *rate_low, u8 *prescaler, int portnum)
+static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port,
+                                    u32 baud_rate, u32 baudclk, u8 *rate_hi,
+                                    u8 *rate_low, u8 *prescaler, int portnum)
 {
        u32     b16,    /* baud rate times 16 (actual rate used internally) */
                        div;    /* divisor */
 
-       dbg("%s - %d.", __func__, baud_rate);
+       dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
 
        /* prevent divide by zero...  */
        b16 = baud_rate * 16L;
@@ -1533,13 +1541,14 @@ static int keyspan_usa19hs_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
                *rate_hi = (u8) ((div >> 8) & 0xff);
 
        if (rate_low && rate_hi)
-               dbg("%s - %d %02x %02x.",
+               dev_dbg(&port->dev, "%s - %d %02x %02x.\n",
                        __func__, baud_rate, *rate_hi, *rate_low);
 
        return KEYSPAN_BAUD_RATE_OK;
 }
 
-static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
+static int keyspan_usa19w_calc_baud(struct usb_serial_port *port,
+                                   u32 baud_rate, u32 baudclk, u8 *rate_hi,
                                    u8 *rate_low, u8 *prescaler, int portnum)
 {
        u32     b16,    /* baud rate times 16 (actual rate used internally) */
@@ -1551,7 +1560,7 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
        u8      best_prescaler;
        int     i;
 
-       dbg("%s - %d.", __func__, baud_rate);
+       dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
 
        /* prevent divide by zero */
        b16 = baud_rate * 16L;
@@ -1596,20 +1605,21 @@ static int keyspan_usa19w_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
                *rate_hi = (u8) ((div >> 8) & 0xff);
        if (prescaler) {
                *prescaler = best_prescaler;
-               /*  dbg("%s - %d %d", __func__, *prescaler, div); */
+               /*  dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */
        }
        return KEYSPAN_BAUD_RATE_OK;
 }
 
        /* USA-28 supports different maximum baud rates on each port */
-static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
-                                   u8 *rate_low, u8 *prescaler, int portnum)
+static int keyspan_usa28_calc_baud(struct usb_serial_port *port,
+                                  u32 baud_rate, u32 baudclk, u8 *rate_hi,
+                                  u8 *rate_low, u8 *prescaler, int portnum)
 {
        u32     b16,    /* baud rate times 16 (actual rate used internally) */
                div,    /* divisor */
                cnt;    /* inverse of divisor (programmed into 8051) */
 
-       dbg("%s - %d.", __func__, baud_rate);
+       dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate);
 
                /* prevent divide by zero */
        b16 = baud_rate * 16L;
@@ -1642,7 +1652,7 @@ static int keyspan_usa28_calc_baud(u32 baud_rate, u32 baudclk, u8 *rate_hi,
                *rate_low = (u8) (cnt & 0xff);
        if (rate_hi)
                *rate_hi = (u8) ((cnt >> 8) & 0xff);
-       dbg("%s - %d OK.", __func__, baud_rate);
+       dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate);
        return KEYSPAN_BAUD_RATE_OK;
 }
 
@@ -1658,7 +1668,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
        struct urb                              *this_urb;
        int                                     device_port, err;
 
-       dbg("%s reset=%d", __func__, reset_port);
+       dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port);
 
        s_priv = usb_get_serial_data(serial);
        p_priv = usb_get_serial_port_data(port);
@@ -1668,11 +1678,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
        outcont_urb = d_details->outcont_endpoints[port->number];
        this_urb = p_priv->outcont_urb;
 
-       dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe));
+       dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));
 
                /* Make sure we have an urb then send the message */
        if (this_urb == NULL) {
-               dbg("%s - oops no urb.", __func__);
+               dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
                return -1;
        }
 
@@ -1681,7 +1691,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
        if ((reset_port + 1) > p_priv->resend_cont)
                p_priv->resend_cont = reset_port + 1;
        if (this_urb->status == -EINPROGRESS) {
-               /*  dbg("%s - already writing", __func__); */
+               /*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
                mdelay(5);
                return -1;
        }
@@ -1692,11 +1702,11 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
        if (p_priv->old_baud != p_priv->baud) {
                p_priv->old_baud = p_priv->baud;
                msg.setClocking = 0xff;
-               if (d_details->calculate_baud_rate
-                   (p_priv->baud, d_details->baudclk, &msg.baudHi,
-                    &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
-                       dbg("%s - Invalid baud rate %d requested, using 9600.",
-                                               __func__, p_priv->baud);
+               if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+                                                  &msg.baudHi, &msg.baudLo, &msg.prescaler,
+                                                  device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+                       dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+                               __func__, p_priv->baud);
                        msg.baudLo = 0;
                        msg.baudHi = 125;       /* Values for 9600 baud */
                        msg.prescaler = 10;
@@ -1790,12 +1800,12 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 
        err = usb_submit_urb(this_urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
 #if 0
        else {
-               dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__
-                   outcont_urb, this_urb->transfer_buffer_length,
-                   usb_pipeendpoint(this_urb->pipe));
+               dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__
+                       outcont_urb, this_urb->transfer_buffer_length,
+                       usb_pipeendpoint(this_urb->pipe));
        }
 #endif
 
@@ -1821,7 +1831,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
        /* only do something if we have a bulk out endpoint */
        this_urb = p_priv->outcont_urb;
        if (this_urb == NULL) {
-               dbg("%s - oops no urb.", __func__);
+               dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
                return -1;
        }
 
@@ -1830,7 +1840,7 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
        if ((reset_port + 1) > p_priv->resend_cont)
                p_priv->resend_cont = reset_port + 1;
        if (this_urb->status == -EINPROGRESS) {
-               dbg("%s already writing", __func__);
+               dev_dbg(&port->dev, "%s already writing\n", __func__);
                mdelay(5);
                return -1;
        }
@@ -1838,9 +1848,10 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
        memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage));
 
        msg.setBaudRate = 1;
-       if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
-               &msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
-               dbg("%s - Invalid baud rate requested %d.",
+       if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+                                          &msg.baudHi, &msg.baudLo, NULL,
+                                          device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+               dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n",
                                                __func__, p_priv->baud);
                msg.baudLo = 0xff;
                msg.baudHi = 0xb2;      /* Values for 9600 baud */
@@ -1915,10 +1926,10 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial,
 
        err = usb_submit_urb(this_urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - usb_submit_urb(setup) failed", __func__);
+               dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__);
 #if 0
        else {
-               dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__,
+               dev_dbg(&port->dev, "%s - usb_submit_urb(setup) OK %d bytes\n", __func__,
                    this_urb->transfer_buffer_length);
        }
 #endif
@@ -1949,13 +1960,13 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
 
        /* Make sure we have an urb then send the message */
        if (this_urb == NULL) {
-               dbg("%s - oops no urb for port %d.", __func__, port->number);
+               dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__, port->number);
                return -1;
        }
 
-       dbg("%s - endpoint %d port %d (%d)",
-                       __func__, usb_pipeendpoint(this_urb->pipe),
-                       port->number, device_port);
+       dev_dbg(&port->dev, "%s - endpoint %d port %d (%d)\n",
+               __func__, usb_pipeendpoint(this_urb->pipe),
+               port->number, device_port);
 
        /* Save reset port val for resend.
           Don't overwrite resend for open/close condition. */
@@ -1963,7 +1974,7 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
                p_priv->resend_cont = reset_port + 1;
 
        if (this_urb->status == -EINPROGRESS) {
-               /*  dbg("%s - already writing", __func__); */
+               /*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
                mdelay(5);
                return -1;
        }
@@ -1977,11 +1988,11 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
        if (p_priv->old_baud != p_priv->baud) {
                p_priv->old_baud = p_priv->baud;
                msg.setClocking = 0xff;
-               if (d_details->calculate_baud_rate
-                   (p_priv->baud, d_details->baudclk, &msg.baudHi,
-                    &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
-                       dbg("%s - Invalid baud rate %d requested, using 9600.",
-                                               __func__, p_priv->baud);
+               if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+                                                  &msg.baudHi, &msg.baudLo, &msg.prescaler,
+                                                  device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+                       dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+                               __func__, p_priv->baud);
                        msg.baudLo = 0;
                        msg.baudHi = 125;       /* Values for 9600 baud */
                        msg.prescaler = 10;
@@ -2100,12 +2111,12 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial,
        }
        err = usb_submit_urb(this_urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
 #if 0
        else {
-               dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__,
-                          outcont_urb, this_urb->transfer_buffer_length,
-                          usb_pipeendpoint(this_urb->pipe));
+               dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__,
+                       outcont_urb, this_urb->transfer_buffer_length,
+                       usb_pipeendpoint(this_urb->pipe));
        }
 #endif
 
@@ -2131,7 +2142,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
        /* only do something if we have a bulk out endpoint */
        this_urb = p_priv->outcont_urb;
        if (this_urb == NULL) {
-               dbg("%s - oops no urb.", __func__);
+               dev_dbg(&port->dev, "%s - oops no urb.\n", __func__);
                return -1;
        }
 
@@ -2140,7 +2151,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
        if ((reset_port + 1) > p_priv->resend_cont)
                p_priv->resend_cont = reset_port + 1;
        if (this_urb->status == -EINPROGRESS) {
-               dbg("%s already writing", __func__);
+               dev_dbg(&port->dev, "%s already writing\n", __func__);
                mdelay(5);
                return -1;
        }
@@ -2151,13 +2162,12 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
        if (p_priv->old_baud != p_priv->baud) {
                p_priv->old_baud = p_priv->baud;
                msg.setClocking = 0x01;
-               if (d_details->calculate_baud_rate
-                   (p_priv->baud, d_details->baudclk, &msg.baudHi,
-                    &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
-                       dbg("%s - Invalid baud rate %d requested, using 9600.",
-                                               __func__, p_priv->baud);
+               if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+                                                  &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) {
+                       dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+                               __func__, p_priv->baud);
                        p_priv->baud = 9600;
-                       d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
+                       d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
                                &msg.baudHi, &msg.baudLo, &prescaler, 0);
                }
                msg.setRxMode = 1;
@@ -2239,7 +2249,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 
        err = usb_submit_urb(this_urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
+               dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
        return 0;
 }
 
@@ -2265,7 +2275,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
 
        /* Make sure we have an urb then send the message */
        if (this_urb == NULL) {
-               dbg("%s - oops no urb for port %d.", __func__,
+               dev_dbg(&port->dev, "%s - oops no urb for port %d.\n", __func__,
                        port->number);
                return -1;
        }
@@ -2275,7 +2285,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
        if ((reset_port + 1) > p_priv->resend_cont)
                p_priv->resend_cont = reset_port + 1;
        if (this_urb->status == -EINPROGRESS) {
-               /*  dbg("%s - already writing", __func__); */
+               /*  dev_dbg(&port->dev, "%s - already writing\n", __func__); */
                mdelay(5);
                return -1;
        }
@@ -2288,11 +2298,11 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
        if (p_priv->old_baud != p_priv->baud) {
                p_priv->old_baud = p_priv->baud;
                msg.setClocking = 0xff;
-               if (d_details->calculate_baud_rate
-                   (p_priv->baud, d_details->baudclk, &msg.baudHi,
-                    &msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE) {
-                       dbg("%s - Invalid baud rate %d requested, using 9600.",
-                                               __func__, p_priv->baud);
+               if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk,
+                                                  &msg.baudHi, &msg.baudLo, &msg.prescaler,
+                                                  device_port) == KEYSPAN_INVALID_BAUD_RATE) {
+                       dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n",
+                               __func__, p_priv->baud);
                        msg.baudLo = 0;
                        msg.baudHi = 125;       /* Values for 9600 baud */
                        msg.prescaler = 10;
@@ -2383,8 +2393,7 @@ static int keyspan_usa67_send_setup(struct usb_serial *serial,
 
        err = usb_submit_urb(this_urb, GFP_ATOMIC);
        if (err != 0)
-               dbg("%s - usb_submit_urb(setup) failed (%d)", __func__,
-                               err);
+               dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
        return 0;
 }
 
@@ -2440,8 +2449,7 @@ static int keyspan_startup(struct usb_serial *serial)
        /* Setup private data for serial driver */
        s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
        if (!s_priv) {
-               dbg("%s - kmalloc for keyspan_serial_private failed.",
-                                                               __func__);
+               dev_dbg(&serial->dev->dev, "%s - kmalloc for keyspan_serial_private failed.\n", __func__);
                return -ENOMEM;
        }
 
@@ -2454,7 +2462,7 @@ static int keyspan_startup(struct usb_serial *serial)
                p_priv = kzalloc(sizeof(struct keyspan_port_private),
                                                                GFP_KERNEL);
                if (!p_priv) {
-                       dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i);
+                       dev_dbg(&port->dev, "%s - kmalloc for keyspan_port_private (%d) failed!.\n", __func__, i);
                        return 1;
                }
                p_priv->device_details = d_details;
@@ -2466,13 +2474,13 @@ static int keyspan_startup(struct usb_serial *serial)
        if (s_priv->instat_urb != NULL) {
                err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
                if (err != 0)
-                       dbg("%s - submit instat urb failed %d", __func__,
+                       dev_dbg(&port->dev, "%s - submit instat urb failed %d\n", __func__,
                                err);
        }
        if (s_priv->indat_urb != NULL) {
                err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
                if (err != 0)
-                       dbg("%s - submit indat urb failed %d", __func__,
+                       dev_dbg(&port->dev, "%s - submit indat urb failed %d\n", __func__,
                                err);
        }
 
@@ -2527,10 +2535,8 @@ static void keyspan_release(struct usb_serial *serial)
 
        s_priv = usb_get_serial_data(serial);
 
-       /*  dbg("Freeing serial->private."); */
        kfree(s_priv);
 
-       /*  dbg("Freeing port->private."); */
        /* Now free per port private data */
        for (i = 0; i < serial->num_ports; i++) {
                port = serial->port[i];

diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index fe1c5d91692cd9a81a033a15df22e094043eabe7..0a8a40b5711e8d288a222aef5c86573c1a674cc1 100644 (file)
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -64,19 +64,23 @@ static int  keyspan_tiocmset                (struct tty_struct *tty,
                                         unsigned int clear);
 static int  keyspan_fake_startup       (struct usb_serial *serial);
 
-static int  keyspan_usa19_calc_baud    (u32 baud_rate, u32 baudclk, 
+static int  keyspan_usa19_calc_baud    (struct usb_serial_port *port,
+                                        u32 baud_rate, u32 baudclk,
                                         u8 *rate_hi, u8 *rate_low,
                                         u8 *prescaler, int portnum);
 
-static int  keyspan_usa19w_calc_baud   (u32 baud_rate, u32 baudclk,
+static int  keyspan_usa19w_calc_baud   (struct usb_serial_port *port,
+                                        u32 baud_rate, u32 baudclk,
                                         u8 *rate_hi, u8 *rate_low,
                                         u8 *prescaler, int portnum);
 
-static int  keyspan_usa28_calc_baud    (u32 baud_rate, u32 baudclk,
+static int  keyspan_usa28_calc_baud    (struct usb_serial_port *port,
+                                        u32 baud_rate, u32 baudclk,
                                         u8 *rate_hi, u8 *rate_low,
                                         u8 *prescaler, int portnum);
 
-static int  keyspan_usa19hs_calc_baud  (u32 baud_rate, u32 baudclk,
+static int  keyspan_usa19hs_calc_baud  (struct usb_serial_port *port,
+                                        u32 baud_rate, u32 baudclk,
                                         u8 *rate_hi, u8 *rate_low,
                                         u8 *prescaler, int portnum);
 
@@ -188,8 +192,9 @@ struct keyspan_device_details {
                /* Endpoint used for global control functions */
        int     glocont_endpoint;
 
-       int     (*calculate_baud_rate) (u32 baud_rate, u32 baudclk,
-                       u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum);
+       int     (*calculate_baud_rate) (struct usb_serial_port *port,
+                                       u32 baud_rate, u32 baudclk,
+                                       u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum);
        u32     baudclk;
 };