powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS
authorAndy Fleming <afleming@freescale.com>
Tue, 30 Mar 2010 01:39:08 +0000 (20:39 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Fri, 21 May 2010 12:41:54 +0000 (07:41 -0500)
I believe support was disabled due to issues with earlier versions of
the board/processor.  At worst, adding the ports back into the device
tree should result in enabling ports that don't work on older systems,
so the default should be to enable them.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/mpc8548cds.dts

index 4173af387c6355ae8c50aa4d7141d98ad0901e76..0f5262452682ebf6e25719b90efee5f6d5a92aa4 100644 (file)
        aliases {
                ethernet0 = &enet0;
                ethernet1 = &enet1;
-/*
                ethernet2 = &enet2;
                ethernet3 = &enet3;
-*/
                serial0 = &serial0;
                serial1 = &serial1;
                pci0 = &pci0;
                        };
                };
 
-/* eTSEC 3/4 are currently broken
                enet2: ethernet@26000 {
                        #address-cells = <1>;
                        #size-cells = <1>;
                                };
                        };
                };
- */
 
                serial0: serial@4500 {
                        cell-index = <0>;