bnx2: convert to net_device_ops
authorStephen Hemminger <shemminger@vyatta.com>
Sat, 22 Nov 2008 01:31:27 +0000 (17:31 -0800)
committerDavid S. Miller <davem@davemloft.net>
Sat, 22 Nov 2008 01:31:27 +0000 (17:31 -0800)
Convert driver to new net_device_ops. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2.c

index fe802215214f7e09794e441a9733b0f5b0ce72fa..8f1cd7cfa09dd4cfa47356af87bdb64d4a0e0f22 100644 (file)
@@ -7707,6 +7707,25 @@ bnx2_init_napi(struct bnx2 *bp)
        }
 }
 
+static const struct net_device_ops bnx2_netdev_ops = {
+       .ndo_open               = bnx2_open,
+       .ndo_start_xmit         = bnx2_start_xmit,
+       .ndo_stop               = bnx2_close,
+       .ndo_get_stats          = bnx2_get_stats,
+       .ndo_set_rx_mode        = bnx2_set_rx_mode,
+       .ndo_do_ioctl           = bnx2_ioctl,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_set_mac_address    = bnx2_change_mac_addr,
+       .ndo_change_mtu         = bnx2_change_mtu,
+       .ndo_tx_timeout         = bnx2_tx_timeout,
+#ifdef BCM_VLAN
+       .ndo_vlan_rx_register   = bnx2_vlan_rx_register,
+#endif
+#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
+       .ndo_poll_controller    = poll_bnx2,
+#endif
+};
+
 static int __devinit
 bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -7731,28 +7750,13 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                return rc;
        }
 
-       dev->open = bnx2_open;
-       dev->hard_start_xmit = bnx2_start_xmit;
-       dev->stop = bnx2_close;
-       dev->get_stats = bnx2_get_stats;
-       dev->set_rx_mode = bnx2_set_rx_mode;
-       dev->do_ioctl = bnx2_ioctl;
-       dev->set_mac_address = bnx2_change_mac_addr;
-       dev->change_mtu = bnx2_change_mtu;
-       dev->tx_timeout = bnx2_tx_timeout;
+       dev->netdev_ops = &bnx2_netdev_ops;
        dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef BCM_VLAN
-       dev->vlan_rx_register = bnx2_vlan_rx_register;
-#endif
        dev->ethtool_ops = &bnx2_ethtool_ops;
 
        bp = netdev_priv(dev);
        bnx2_init_napi(bp);
 
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
-       dev->poll_controller = poll_bnx2;
-#endif
-
        pci_set_drvdata(pdev, dev);
 
        memcpy(dev->dev_addr, bp->mac_addr, 6);