hwmon: (w83627ehf) Move fan pins check to a separate function

Move the check of fan pin usage to a separate function. This improves
readability, and will make it easier to integrate chip-specific
conditions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index c77a4b92ebc947e14a3ee4f5d691f9500e734244..f5fec1cd1d4e4e8c23c181d37aa6f40ea2119c04 100644 (file)
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1844,13 +1844,78 @@ static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
        data->reg_temp_config[r2] = tmp;
 }
 
+static void __devinit
+w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
+                          struct w83627ehf_data *data)
+{
+       int fan3pin, fan4pin, fan4min, fan5pin, regval;
+
+       superio_enter(sio_data->sioreg);
+
+       /* fan4 and fan5 share some pins with the GPIO and serial flash */
+       if (sio_data->kind == nct6775) {
+               /* On NCT6775, fan4 shares pins with the fdc interface */
+               fan3pin = 1;
+               fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
+               fan4min = 0;
+               fan5pin = 0;
+       } else if (sio_data->kind == nct6776) {
+               fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
+               fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
+               fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
+               fan4min = fan4pin;
+       } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
+               fan3pin = 1;
+               fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
+               fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
+               fan4min = fan4pin;
+       } else {
+               fan3pin = 1;
+               fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
+               fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
+               fan4min = fan4pin;
+       }
+
+       superio_exit(sio_data->sioreg);
+
+       data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
+       data->has_fan |= (fan3pin << 2);
+       data->has_fan_min |= (fan3pin << 2);
+
+       if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
+               /*
+                * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1
+                * register
+                */
+               data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
+               data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
+       } else {
+               /*
+                * It looks like fan4 and fan5 pins can be alternatively used
+                * as fan on/off switches, but fan5 control is write only :/
+                * We assume that if the serial interface is disabled, designers
+                * connected fan5 as input unless they are emitting log 1, which
+                * is not the default.
+                */
+               regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
+               if ((regval & (1 << 2)) && fan4pin) {
+                       data->has_fan |= (1 << 3);
+                       data->has_fan_min |= (1 << 3);
+               }
+               if (!(regval & (1 << 1)) && fan5pin) {
+                       data->has_fan |= (1 << 4);
+                       data->has_fan_min |= (1 << 4);
+               }
+       }
+}
+
 static int __devinit w83627ehf_probe(struct platform_device *pdev)
 {
        struct device *dev = &pdev->dev;
        struct w83627ehf_sio_data *sio_data = dev->platform_data;
        struct w83627ehf_data *data;
        struct resource *res;
-       u8 fan3pin, fan4pin, fan4min, fan5pin, en_vrm10;
+       u8 en_vrm10;
        int i, err = 0;
 
        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -2135,30 +2200,6 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
                }
        }
 
-       /* fan4 and fan5 share some pins with the GPIO and serial flash */
-       if (sio_data->kind == nct6775) {
-               /* On NCT6775, fan4 shares pins with the fdc interface */
-               fan3pin = 1;
-               fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
-               fan4min = 0;
-               fan5pin = 0;
-       } else if (sio_data->kind == nct6776) {
-               fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
-               fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
-               fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
-               fan4min = fan4pin;
-       } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
-               fan3pin = 1;
-               fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
-               fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
-               fan4min = fan4pin;
-       } else {
-               fan3pin = 1;
-               fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
-               fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
-               fan4min = fan4pin;
-       }
-
        if (fan_debounce &&
            (sio_data->kind == nct6775 || sio_data->kind == nct6776)) {
                u8 tmp;
@@ -2176,34 +2217,7 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 
        superio_exit(sio_data->sioreg);
 
-       /* It looks like fan4 and fan5 pins can be alternatively used
-          as fan on/off switches, but fan5 control is write only :/
-          We assume that if the serial interface is disabled, designers
-          connected fan5 as input unless they are emitting log 1, which
-          is not the default. */
-
-       data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
-
-       data->has_fan |= (fan3pin << 2);
-       data->has_fan_min |= (fan3pin << 2);
-
-       /*
-        * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1 register
-        */
-       if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
-               data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
-               data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
-       } else {
-               i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
-               if ((i & (1 << 2)) && fan4pin) {
-                       data->has_fan |= (1 << 3);
-                       data->has_fan_min |= (1 << 3);
-               }
-               if (!(i & (1 << 1)) && fan5pin) {
-                       data->has_fan |= (1 << 4);
-                       data->has_fan_min |= (1 << 4);
-               }
-       }
+       w83627ehf_check_fan_inputs(sio_data, data);
 
        /* Read fan clock dividers immediately */
        w83627ehf_update_fan_div_common(dev, data);