ARM: mxs: dt: cfa10057: remove hogpins

Necessary pins are now grabbed by respective drivers. Unecessary hogpins are
simply removed.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 2da713cdb42aa3de69fdac76bbd522a4a458857f..0333c0532f28f3ff5e4e011036214b31393c29df 100644 (file)
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -23,35 +23,16 @@
        apb@80000000 {
                apbh@80000000 {
                        pinctrl@80018000 {
-                               pinctrl-names = "default", "default";
-                               pinctrl-1 = <&hog_pins_cfa10057
-                                       &hog_pins_cfa10057_pullup>;
-
-                               hog_pins_cfa10057: hog-10057@0 {
+                               usb_pins_cfa10057: usb-10057@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
                                                0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-                                               0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
                                        >;
                                        fsl,drive-strength = <0>;
                                        fsl,voltage = <1>;
                                        fsl,pull-up = <0>;
                                };
 
-                               hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
-                                       reg = <0>;
-                                       fsl,pinmux-ids = <
-                                               0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
-                                               0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-                                               0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
-                                               0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
-                                               0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-                                       >;
-                                       fsl,drive-strength = <0>;
-                                       fsl,voltage = <1>;
-                                       fsl,pull-up = <1>;
-                               };
-
                                lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
@@ -164,6 +145,8 @@
 
                reg_usb1_vbus: usb1_vbus {
                        compatible = "regulator-fixed";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&usb_pins_cfa10057>;
                        regulator-name = "usb1_vbus";
                        regulator-min-microvolt = <5000000>;
                        regulator-max-microvolt = <5000000>;