#define SEN_OV7620 7
#define SEN_OV7620AE 8
#define SEN_OV7640 9
-#define SEN_OV7670 10
-#define SEN_OV76BE 11
-#define SEN_OV8610 12
+#define SEN_OV7648 10
+#define SEN_OV7670 11
+#define SEN_OV76BE 12
+#define SEN_OV8610 13
u8 sensor_addr;
int sensor_width;
break;
case 0x48:
PDEBUG(D_PROBE, "Sensor is an OV7648");
- sd->sensor = SEN_OV7640; /* FIXME */
+ sd->sensor = SEN_OV7648;
break;
default:
PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
(1 << OV7670_FREQ_IDX);
}
sd->quality = QUALITY_DEF;
- if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+ if (sd->sensor == SEN_OV7640 ||
+ sd->sensor == SEN_OV7648 ||
+ sd->sensor == SEN_OV7670)
gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX;
/* OV8610 Frequency filter control should work but needs testing */
if (sd->sensor == SEN_OV8610)
return -EIO;
break;
case SEN_OV7640:
+ case SEN_OV7648:
if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
return -EIO;
break;
case SEN_OV7620:
case SEN_OV7620AE:
case SEN_OV7640:
+ case SEN_OV7648:
case SEN_OV76BE:
if (sd->gspca_dev.width == 320)
interlaced = 1;
if (write_regvals(sd, mode_init_519,
ARRAY_SIZE(mode_init_519)))
return -EIO;
- if (sd->sensor == SEN_OV7640) {
+ if (sd->sensor == SEN_OV7640 ||
+ sd->sensor == SEN_OV7648) {
/* Select 8-bit input mode */
reg_w_mask(sd, OV519_R20_DFR, 0x10, 0x10);
}
if (sd->sensor == SEN_OV7670 &&
sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
reg_w(sd, OV519_R12_X_OFFSETL, 0x04);
+ else if (sd->sensor == SEN_OV7648 &&
+ sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
+ reg_w(sd, OV519_R12_X_OFFSETL, 0x01);
else
reg_w(sd, OV519_R12_X_OFFSETL, 0x00);
reg_w(sd, OV519_R13_X_OFFSETH, 0x00);
sd->clockdiv = 0;
switch (sd->sensor) {
case SEN_OV7640:
+ case SEN_OV7648:
switch (sd->frame_rate) {
default:
/* case 30: */
i2c_w(sd, 0x35, qvga ? 0x1e : 0x9e);
break;
case SEN_OV7640:
+ case SEN_OV7648:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
-/* i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */
-/* i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); */
-/* i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); */
-/* i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); */
-/* i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); */
+ /* The following 5 lines where commented out before with a
+ comment wondering if they did anything. This was because
+ the old driver did only 640x480, at 320x240 these 5 writes
+ *significantly* improve the image quality. */
+ i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a);
+ i2c_w(sd, 0x25, qvga ? 0x30 : 0x60);
+ i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
+ i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
+ i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x12, 0x04, 0x04); /* AWB: 1 */
break;
case SEN_OV7670:
vwsbase = vwebase = 0x05;
break;
case SEN_OV7640:
+ case SEN_OV7648:
hwsbase = 0x1a;
hwebase = 0x1a;
vwsbase = vwebase = 0x03;
case SEN_OV6630:
case SEN_OV66308AF:
case SEN_OV7640:
+ case SEN_OV7648:
i2c_w(sd, OV7610_REG_BRT, val);
break;
case SEN_OV7620:
break;
}
case SEN_OV7640:
+ case SEN_OV7648:
/* Use gain control instead. */
i2c_w(sd, OV7610_REG_GAIN, val >> 2);
break;
i2c_w(sd, OV7610_REG_SAT, val);
break;
case SEN_OV7640:
+ case SEN_OV7648:
i2c_w(sd, OV7610_REG_SAT, val & 0xf0);
break;
case SEN_OV7670:
static void setautobrightness(struct sd *sd)
{
- if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670 ||
+ if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7648 ||
+ sd->sensor == SEN_OV7670 ||
sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
return;