Fix the code comments to align with the drivers/net/ commenting style.
Also fix other checkpatch errors such as using tabs where possible and
properly wrap lines to conform to the 80 char limit (unless it is
a string).
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
#define _E1000_DEFINES_H_
/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define REQ_TX_DESCRIPTOR_MULTIPLE 8
-#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
/* IVAR valid bit */
-#define E1000_IVAR_VALID 0x80
+#define E1000_IVAR_VALID 0x80
/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
-#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
-#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
-#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
-#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
-#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-
-#define E1000_RXDEXT_STATERR_LB 0x00040000
-#define E1000_RXDEXT_STATERR_CE 0x01000000
-#define E1000_RXDEXT_STATERR_SE 0x02000000
-#define E1000_RXDEXT_STATERR_SEQ 0x04000000
-#define E1000_RXDEXT_STATERR_CXE 0x10000000
-#define E1000_RXDEXT_STATERR_TCPE 0x20000000
-#define E1000_RXDEXT_STATERR_IPE 0x40000000
-#define E1000_RXDEXT_STATERR_RXE 0x80000000
-
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+
+#define E1000_RXDEXT_STATERR_LB 0x00040000
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
/* Same mask, but for extended and packet split descriptors */
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
/* Device Control */
-#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
/* Device Status */
-#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
-#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
/* Transmit Descriptor bit definitions */
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */
+#define E1000_TXD_STAT_DD 0x00000001 /* Desc Done */
-#define MAX_JUMBO_FRAME_SIZE 0x3F00
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
/* 802.1q VLAN Packet Size */
-#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
/* Error Codes */
-#define E1000_SUCCESS 0
-#define E1000_ERR_CONFIG 3
-#define E1000_ERR_MAC_INIT 5
-#define E1000_ERR_MBX 15
+#define E1000_SUCCESS 0
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_MBX 15
/* SRRCTL bit definitions */
-#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
-#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
-#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
-#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
-#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
-#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
-#define E1000_SRRCTL_DROP_EN 0x80000000
+#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
+#define E1000_SRRCTL_DROP_EN 0x80000000
-#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
-#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
+#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
/* Additional Descriptor Control definitions */
-#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
-#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
+#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Que */
+#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Que */
/* Direct Cache Access (DCA) definitions */
-#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
-#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
+#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
#endif /* _E1000_DEFINES_H_ */
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
#include "igbvf.h"
#include <linux/if_vlan.h>
-
struct igbvf_stats {
char stat_string[ETH_GSTRING_LEN];
int sizeof_stat;
#define IGBVF_TEST_LEN ARRAY_SIZE(igbvf_gstrings_test)
static int igbvf_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+ struct ethtool_cmd *ecmd)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
}
static int igbvf_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+ struct ethtool_cmd *ecmd)
{
return -EOPNOTSUPP;
}
static void igbvf_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
+ struct ethtool_pauseparam *pause)
{
}
static int igbvf_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
+ struct ethtool_pauseparam *pause)
{
return -EOPNOTSUPP;
}
static u32 igbvf_get_msglevel(struct net_device *netdev)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
+
return adapter->msg_enable;
}
static void igbvf_set_msglevel(struct net_device *netdev, u32 data)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
+
adapter->msg_enable = data;
}
}
static void igbvf_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
+ struct ethtool_regs *regs, void *p)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
}
static int igbvf_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
+ struct ethtool_eeprom *eeprom, u8 *bytes)
{
return -EOPNOTSUPP;
}
static int igbvf_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
+ struct ethtool_eeprom *eeprom, u8 *bytes)
{
return -EOPNOTSUPP;
}
static void igbvf_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
+ struct ethtool_drvinfo *drvinfo)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
}
static void igbvf_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
+ struct ethtool_ringparam *ring)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct igbvf_ring *tx_ring = adapter->tx_ring;
}
static int igbvf_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
+ struct ethtool_ringparam *ring)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct igbvf_ring *temp_ring;
igbvf_down(adapter);
- /*
- * We can't just free everything and then setup again,
+ /* We can't just free everything and then setup again,
* because the ISRs in MSI-X mode get passed pointers
- * to the tx and rx ring structs.
+ * to the Tx and Rx ring structs.
*/
if (new_tx_count != adapter->tx_ring->count) {
memcpy(temp_ring, adapter->tx_ring, sizeof(struct igbvf_ring));
igbvf_free_rx_resources(adapter->rx_ring);
- memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring));
+ memcpy(adapter->rx_ring, temp_ring, sizeof(struct igbvf_ring));
}
err_setup:
igbvf_up(adapter);
}
static void igbvf_diag_test(struct net_device *netdev,
- struct ethtool_test *eth_test, u64 *data)
+ struct ethtool_test *eth_test, u64 *data)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
set_bit(__IGBVF_TESTING, &adapter->state);
- /*
- * Link test performed before hardware reset so autoneg doesn't
+ /* Link test performed before hardware reset so autoneg doesn't
* interfere with test result
*/
if (igbvf_link_test(adapter, &data[0]))
}
static void igbvf_get_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
+ struct ethtool_wolinfo *wol)
{
wol->supported = 0;
wol->wolopts = 0;
}
static int igbvf_set_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
+ struct ethtool_wolinfo *wol)
{
return -EOPNOTSUPP;
}
static int igbvf_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
+ struct ethtool_coalesce *ec)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
}
static int igbvf_set_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
+ struct ethtool_coalesce *ec)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) &&
- (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
+ (ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
adapter->current_itr = ec->rx_coalesce_usecs << 2;
adapter->requested_itr = 1000000000 /
(adapter->current_itr * 256);
adapter->current_itr = IGBVF_START_ITR;
adapter->requested_itr = ec->rx_coalesce_usecs;
} else if (ec->rx_coalesce_usecs == 0) {
- /*
- * The user's desire is to turn off interrupt throttling
+ /* The user's desire is to turn off interrupt throttling
* altogether, but due to HW limitations, we can't do that.
* Instead we set a very small value in EITR, which would
* allow ~967k interrupts per second, but allow the adapter's
adapter->current_itr = 4;
adapter->requested_itr = 1000000000 /
(adapter->current_itr * 256);
- } else
+ } else {
return -EINVAL;
+ }
writel(adapter->current_itr,
hw->hw_addr + adapter->rx_ring->itr_register);
static int igbvf_nway_reset(struct net_device *netdev)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
+
if (netif_running(netdev))
igbvf_reinit_locked(adapter);
return 0;
}
-
static void igbvf_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats,
- u64 *data)
+ struct ethtool_stats *stats,
+ u64 *data)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
int i;
igbvf_update_stats(adapter);
for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) {
char *p = (char *)adapter +
- igbvf_gstrings_stats[i].stat_offset;
+ igbvf_gstrings_stats[i].stat_offset;
char *b = (char *)adapter +
- igbvf_gstrings_stats[i].base_stat_offset;
+ igbvf_gstrings_stats[i].base_stat_offset;
data[i] = ((igbvf_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? (*(u64 *)p - *(u64 *)b) :
- (*(u32 *)p - *(u32 *)b));
+ sizeof(u64)) ? (*(u64 *)p - *(u64 *)b) :
+ (*(u32 *)p - *(u32 *)b));
}
-
}
static int igbvf_get_sset_count(struct net_device *dev, int stringset)
{
- switch(stringset) {
+ switch (stringset) {
case ETH_SS_TEST:
return IGBVF_TEST_LEN;
case ETH_SS_STATS:
}
static void igbvf_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
+ u8 *data)
{
u8 *p = data;
int i;
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
struct igbvf_adapter;
/* Interrupt defines */
-#define IGBVF_START_ITR 488 /* ~8000 ints/sec */
-#define IGBVF_4K_ITR 980
-#define IGBVF_20K_ITR 196
-#define IGBVF_70K_ITR 56
+#define IGBVF_START_ITR 488 /* ~8000 ints/sec */
+#define IGBVF_4K_ITR 980
+#define IGBVF_20K_ITR 196
+#define IGBVF_70K_ITR 56
enum latency_range {
lowest_latency = 0,
latency_invalid = 255
};
-
/* Interrupt modes, as used by the IntMode parameter */
-#define IGBVF_INT_MODE_LEGACY 0
-#define IGBVF_INT_MODE_MSI 1
-#define IGBVF_INT_MODE_MSIX 2
+#define IGBVF_INT_MODE_LEGACY 0
+#define IGBVF_INT_MODE_MSI 1
+#define IGBVF_INT_MODE_MSIX 2
/* Tx/Rx descriptor defines */
-#define IGBVF_DEFAULT_TXD 256
-#define IGBVF_MAX_TXD 4096
-#define IGBVF_MIN_TXD 80
+#define IGBVF_DEFAULT_TXD 256
+#define IGBVF_MAX_TXD 4096
+#define IGBVF_MIN_TXD 80
-#define IGBVF_DEFAULT_RXD 256
-#define IGBVF_MAX_RXD 4096
-#define IGBVF_MIN_RXD 80
+#define IGBVF_DEFAULT_RXD 256
+#define IGBVF_MAX_RXD 4096
+#define IGBVF_MIN_RXD 80
-#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */
-#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */
+#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */
/* RX descriptor control thresholds.
* PTHRESH - MAC will consider prefetch if it has fewer than this number of
- * descriptors available in its onboard memory.
- * Setting this to 0 disables RX descriptor prefetch.
+ * descriptors available in its onboard memory.
+ * Setting this to 0 disables RX descriptor prefetch.
* HTHRESH - MAC will only prefetch if there are at least this many descriptors
- * available in host memory.
- * If PTHRESH is 0, this should also be 0.
+ * available in host memory.
+ * If PTHRESH is 0, this should also be 0.
* WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
- * descriptors until either it has this many to write back, or the
- * ITR timer expires.
+ * descriptors until either it has this many to write back, or the
+ * ITR timer expires.
*/
-#define IGBVF_RX_PTHRESH 16
-#define IGBVF_RX_HTHRESH 8
-#define IGBVF_RX_WTHRESH 1
+#define IGBVF_RX_PTHRESH 16
+#define IGBVF_RX_HTHRESH 8
+#define IGBVF_RX_WTHRESH 1
/* this is the size past which hardware will drop packets when setting LPE=0 */
-#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
-#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */
+#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */
/* How many Tx Descriptors do we need to call netif_wake_queue ? */
-#define IGBVF_TX_QUEUE_WAKE 32
+#define IGBVF_TX_QUEUE_WAKE 32
/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-#define AUTO_ALL_MODES 0
-#define IGBVF_EEPROM_APME 0x0400
+#define AUTO_ALL_MODES 0
+#define IGBVF_EEPROM_APME 0x0400
-#define IGBVF_MNG_VLAN_NONE (-1)
+#define IGBVF_MNG_VLAN_NONE (-1)
/* Number of packet split data buffers (not including the header buffer) */
-#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
enum igbvf_boards {
board_vf,
u64 bytes;
};
-/*
- * wrappers around a pointer to a socket buffer,
+/* wrappers around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer
*/
struct igbvf_buffer {
struct igbvf_ring {
struct igbvf_adapter *adapter; /* backlink */
- union igbvf_desc *desc; /* pointer to ring memory */
- dma_addr_t dma; /* phys address of ring */
- unsigned int size; /* length of ring in bytes */
- unsigned int count; /* number of desc. in ring */
+ union igbvf_desc *desc; /* pointer to ring memory */
+ dma_addr_t dma; /* phys address of ring */
+ unsigned int size; /* length of ring in bytes */
+ unsigned int count; /* number of desc. in ring */
u16 next_to_use;
u16 next_to_clean;
u32 requested_itr; /* ints/sec or adaptive */
u32 current_itr; /* Actual ITR register value, not ints/sec */
- /*
- * Tx
- */
+ /* Tx */
struct igbvf_ring *tx_ring /* One per active queue */
____cacheline_aligned_in_smp;
u32 tx_fifo_size;
u32 tx_dma_failed;
- /*
- * Rx
- */
+ /* Rx */
struct igbvf_ring *rx_ring;
u32 rx_int_delay;
struct net_device *netdev;
struct pci_dev *pdev;
struct net_device_stats net_stats;
- spinlock_t stats_lock; /* prevent concurrent stats updates */
+ spinlock_t stats_lock; /* prevent concurrent stats updates */
/* structs defined in e1000_hw.h */
struct e1000_hw hw;
};
struct igbvf_info {
- enum e1000_mac_type mac;
- unsigned int flags;
- u32 pba;
- void (*init_ops)(struct e1000_hw *);
- s32 (*get_variants)(struct igbvf_adapter *);
+ enum e1000_mac_type mac;
+ unsigned int flags;
+ u32 pba;
+ void (*init_ops)(struct e1000_hw *);
+ s32 (*get_variants)(struct igbvf_adapter *);
};
/* hardware capability, feature, and workaround flags */
-#define IGBVF_FLAG_RX_CSUM_DISABLED (1 << 0)
-#define IGBVF_FLAG_RX_LB_VLAN_BSWAP (1 << 1)
+#define IGBVF_FLAG_RX_CSUM_DISABLED (1 << 0)
+#define IGBVF_FLAG_RX_LB_VLAN_BSWAP (1 << 1)
#define IGBVF_RX_DESC_ADV(R, i) \
(&((((R).desc))[i].rx_desc))
#define IGBVF_TX_DESC_ADV(R, i) \
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
}
/**
- * e1000_poll_for_ack - Wait for message acknowledgement
+ * e1000_poll_for_ack - Wait for message acknowledgment
* @hw: pointer to the HW structure
*
- * returns SUCCESS if it successfully received a message acknowledgement
+ * returns SUCCESS if it successfully received a message acknowledgment
**/
static s32 e1000_poll_for_ack(struct e1000_hw *hw)
{
s32 ret_val = -E1000_ERR_MBX;
if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
- E1000_V2PMAILBOX_RSTI))) {
+ E1000_V2PMAILBOX_RSTI))) {
ret_val = E1000_SUCCESS;
hw->mbx.stats.rsts++;
}
/* Take ownership of the buffer */
ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);
- /* reserve mailbox for vf use */
+ /* reserve mailbox for VF use */
if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU)
ret_val = E1000_SUCCESS;
}
/**
- * e1000_read_mbx_vf - Reads a message from the inbox intended for vf
+ * e1000_read_mbx_vf - Reads a message from the inbox intended for VF
* @hw: pointer to the HW structure
* @msg: The message buffer
* @size: Length of buffer
}
/**
- * e1000_init_mbx_params_vf - set initial values for vf mailbox
+ * e1000_init_mbx_params_vf - set initial values for VF mailbox
* @hw: pointer to the HW structure
*
- * Initializes the hw->mbx struct to correct values for vf mailbox
+ * Initializes the hw->mbx struct to correct values for VF mailbox
*/
s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
{
struct e1000_mbx_info *mbx = &hw->mbx;
/* start mailbox as timed out and let the reset_hw call set the timeout
- * value to being communications */
+ * value to being communications
+ */
mbx->timeout = 0;
mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;
return E1000_SUCCESS;
}
-
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
#include "vf.h"
-#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
-#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
-#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
-#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
-#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
-#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
-#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
-#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
+#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
+#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
+#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
+#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
+#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
+#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
-#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
* PF. The reverse is true if it is E1000_PF_*.
* Message ACK's are the value or'd with 0xF0000000
*/
-#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
- * this are the ACK */
-#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
- * this are the NACK */
-#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
- clear to send requests */
+/* Messages below or'd with this are the ACK */
+#define E1000_VT_MSGTYPE_ACK 0x80000000
+/* Messages below or'd with this are the NACK */
+#define E1000_VT_MSGTYPE_NACK 0x40000000
+/* Indicates that VF is still clear to send requests */
+#define E1000_VT_MSGTYPE_CTS 0x20000000
/* We have a total wait time of 1s for vf mailbox posted messages */
-#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mailbox timeout */
-#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */
+#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mbx timeout */
+#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */
-#define E1000_VT_MSGINFO_SHIFT 16
+#define E1000_VT_MSGINFO_SHIFT 16
/* bits 23:16 are used for exra info for certain messages */
-#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
+#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
-#define E1000_VF_RESET 0x01 /* VF requests reset */
-#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
-#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
-#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
-#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
+#define E1000_VF_RESET 0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
+#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
+#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
+#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
-#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
+#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
void e1000_init_mbx_ops_generic(struct e1000_hw *hw);
s32 e1000_init_mbx_params_vf(struct e1000_hw *);
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
static void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
static struct igbvf_info igbvf_vf_info = {
- .mac = e1000_vfadapt,
- .flags = 0,
- .pba = 10,
- .init_ops = e1000_init_function_pointers_vf,
+ .mac = e1000_vfadapt,
+ .flags = 0,
+ .pba = 10,
+ .init_ops = e1000_init_function_pointers_vf,
};
static struct igbvf_info igbvf_i350_vf_info = {
- .mac = e1000_vfadapt_i350,
- .flags = 0,
- .pba = 10,
- .init_ops = e1000_init_function_pointers_vf,
+ .mac = e1000_vfadapt_i350,
+ .flags = 0,
+ .pba = 10,
+ .init_ops = e1000_init_function_pointers_vf,
};
static const struct igbvf_info *igbvf_info_tbl[] = {
- [board_vf] = &igbvf_vf_info,
- [board_i350_vf] = &igbvf_i350_vf_info,
+ [board_vf] = &igbvf_vf_info,
+ [board_i350_vf] = &igbvf_i350_vf_info,
};
/**
* igbvf_desc_unused - calculate if we have unused descriptors
+ * @rx_ring: address of receive ring structure
**/
static int igbvf_desc_unused(struct igbvf_ring *ring)
{
* @skb: pointer to sk_buff to be indicated to stack
**/
static void igbvf_receive_skb(struct igbvf_adapter *adapter,
- struct net_device *netdev,
- struct sk_buff *skb,
- u32 status, u16 vlan)
+ struct net_device *netdev,
+ struct sk_buff *skb,
+ u32 status, u16 vlan)
{
u16 vid;
}
static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
- u32 status_err, struct sk_buff *skb)
+ u32 status_err, struct sk_buff *skb)
{
skb_checksum_none_assert(skb);
* @cleaned_count: number of buffers to repopulate
**/
static void igbvf_alloc_rx_buffers(struct igbvf_ring *rx_ring,
- int cleaned_count)
+ int cleaned_count)
{
struct igbvf_adapter *adapter = rx_ring->adapter;
struct net_device *netdev = adapter->netdev;
}
buffer_info->page_dma =
dma_map_page(&pdev->dev, buffer_info->page,
- buffer_info->page_offset,
- PAGE_SIZE / 2,
+ buffer_info->page_offset,
+ PAGE_SIZE / 2,
DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev,
buffer_info->page_dma)) {
buffer_info->skb = skb;
buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
- bufsz,
+ bufsz,
DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
dev_kfree_skb(buffer_info->skb);
}
}
/* Refresh the desc even if buffer_addrs didn't change because
- * each write-back erases this info. */
+ * each write-back erases this info.
+ */
if (adapter->rx_ps_hdr_size) {
rx_desc->read.pkt_addr =
cpu_to_le64(buffer_info->page_dma);
rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
} else {
- rx_desc->read.pkt_addr =
- cpu_to_le64(buffer_info->dma);
+ rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
rx_desc->read.hdr_addr = 0;
}
/* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
- * such as IA-64). */
+ * such as IA-64).
+ */
wmb();
writel(i, adapter->hw.hw_addr + rx_ring->tail);
}
* is no guarantee that everything was cleaned
**/
static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter,
- int *work_done, int work_to_do)
+ int *work_done, int work_to_do)
{
struct igbvf_ring *rx_ring = adapter->rx_ring;
struct net_device *netdev = adapter->netdev;
* that case, it fills the header buffer and spills the rest
* into the page.
*/
- hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info) &
- E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
+ hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info)
+ & E1000_RXDADV_HDRBUFLEN_MASK) >>
+ E1000_RXDADV_HDRBUFLEN_SHIFT;
if (hlen > adapter->rx_ps_hdr_size)
hlen = adapter->rx_ps_hdr_size;
buffer_info->skb = NULL;
if (!adapter->rx_ps_hdr_size) {
dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_buffer_len,
+ adapter->rx_buffer_len,
DMA_FROM_DEVICE);
buffer_info->dma = 0;
skb_put(skb, length);
if (!skb_shinfo(skb)->nr_frags) {
dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_ps_hdr_size,
+ adapter->rx_ps_hdr_size,
DMA_FROM_DEVICE);
skb_put(skb, hlen);
}
if (length) {
dma_unmap_page(&pdev->dev, buffer_info->page_dma,
- PAGE_SIZE / 2,
+ PAGE_SIZE / 2,
DMA_FROM_DEVICE);
buffer_info->page_dma = 0;
skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
- buffer_info->page,
- buffer_info->page_offset,
- length);
+ buffer_info->page,
+ buffer_info->page_offset,
+ length);
if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) ||
(page_count(buffer_info->page) != 1))
skb->protocol = eth_type_trans(skb, netdev);
igbvf_receive_skb(adapter, netdev, skb, staterr,
- rx_desc->wb.upper.vlan);
+ rx_desc->wb.upper.vlan);
next_desc:
rx_desc->wb.upper.status_error = 0;
}
static void igbvf_put_txbuf(struct igbvf_adapter *adapter,
- struct igbvf_buffer *buffer_info)
+ struct igbvf_buffer *buffer_info)
{
if (buffer_info->dma) {
if (buffer_info->mapped_as_page)
* Return 0 on success, negative on failure
**/
int igbvf_setup_tx_resources(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring)
+ struct igbvf_ring *tx_ring)
{
struct pci_dev *pdev = adapter->pdev;
int size;
err:
vfree(tx_ring->buffer_info);
dev_err(&adapter->pdev->dev,
- "Unable to allocate memory for the transmit descriptor ring\n");
+ "Unable to allocate memory for the transmit descriptor ring\n");
return -ENOMEM;
}
vfree(rx_ring->buffer_info);
rx_ring->buffer_info = NULL;
dev_err(&adapter->pdev->dev,
- "Unable to allocate memory for the receive descriptor ring\n");
+ "Unable to allocate memory for the receive descriptor ring\n");
return -ENOMEM;
}
for (i = 0; i < rx_ring->count; i++) {
buffer_info = &rx_ring->buffer_info[i];
if (buffer_info->dma) {
- if (adapter->rx_ps_hdr_size){
+ if (adapter->rx_ps_hdr_size) {
dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_ps_hdr_size,
+ adapter->rx_ps_hdr_size,
DMA_FROM_DEVICE);
} else {
dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_buffer_len,
+ adapter->rx_buffer_len,
DMA_FROM_DEVICE);
}
buffer_info->dma = 0;
if (buffer_info->page_dma)
dma_unmap_page(&pdev->dev,
buffer_info->page_dma,
- PAGE_SIZE / 2,
+ PAGE_SIZE / 2,
DMA_FROM_DEVICE);
put_page(buffer_info->page);
buffer_info->page = NULL;
rx_ring->buffer_info = NULL;
dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
+ rx_ring->dma);
rx_ring->desc = NULL;
}
* @packets: the number of packets during this measurement interval
* @bytes: the number of bytes during this measurement interval
*
- * Stores a new ITR value based on packets and byte
- * counts during the last interrupt. The advantage of per interrupt
- * computation is faster updates and more accurate ITR for the current
- * traffic pattern. Constants in this function were computed
- * based on theoretical maximum wire speed and thresholds were set based
- * on testing data as well as attempting to minimize response time
- * while increasing bulk throughput.
+ * Stores a new ITR value based on packets and byte counts during the last
+ * interrupt. The advantage of per interrupt computation is faster updates
+ * and more accurate ITR for the current traffic pattern. Constants in this
+ * function were computed based on theoretical maximum wire speed and thresholds
+ * were set based on testing data as well as attempting to minimize response
+ * time while increasing bulk throughput.
**/
static enum latency_range igbvf_update_itr(struct igbvf_adapter *adapter,
enum latency_range itr_setting,
new_itr = igbvf_range_to_itr(adapter->tx_ring->itr_range);
-
if (new_itr != adapter->tx_ring->itr_val) {
u32 current_itr = adapter->tx_ring->itr_val;
- /*
- * this attempts to bias the interrupt rate towards Bulk
+ /* this attempts to bias the interrupt rate towards Bulk
* by adding intermediate steps when interrupt rate is
* increasing
*/
new_itr = new_itr > current_itr ?
- min(current_itr + (new_itr >> 2), new_itr) :
- new_itr;
+ min(current_itr + (new_itr >> 2), new_itr) :
+ new_itr;
adapter->tx_ring->itr_val = new_itr;
adapter->tx_ring->set_itr = 1;
if (new_itr != adapter->rx_ring->itr_val) {
u32 current_itr = adapter->rx_ring->itr_val;
+
new_itr = new_itr > current_itr ?
- min(current_itr + (new_itr >> 2), new_itr) :
- new_itr;
+ min(current_itr + (new_itr >> 2), new_itr) :
+ new_itr;
adapter->rx_ring->itr_val = new_itr;
adapter->rx_ring->set_itr = 1;
segs = skb_shinfo(skb)->gso_segs ?: 1;
/* multiply data chunks by size of headers */
bytecount = ((segs - 1) * skb_headlen(skb)) +
- skb->len;
+ skb->len;
total_packets += segs;
total_bytes += bytecount;
}
tx_ring->next_to_clean = i;
- if (unlikely(count &&
- netif_carrier_ok(netdev) &&
- igbvf_desc_unused(tx_ring) >= IGBVF_TX_QUEUE_WAKE)) {
+ if (unlikely(count && netif_carrier_ok(netdev) &&
+ igbvf_desc_unused(tx_ring) >= IGBVF_TX_QUEUE_WAKE)) {
/* Make sure that anybody stopping the queue after this
* sees the new next_to_clean.
*/
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
- /* auto mask will automatically reenable the interrupt when we write
- * EICS */
+ /* auto mask will automatically re-enable the interrupt when we write
+ * EICS
+ */
if (!igbvf_clean_tx_irq(tx_ring))
/* Ring was not completely cleaned, so fire another interrupt */
ew32(EICS, tx_ring->eims_value);
#define IGBVF_NO_QUEUE -1
static void igbvf_assign_vector(struct igbvf_adapter *adapter, int rx_queue,
- int tx_queue, int msix_vector)
+ int tx_queue, int msix_vector)
{
struct e1000_hw *hw = &adapter->hw;
u32 ivar, index;
/* 82576 uses a table-based method for assigning vectors.
- Each queue has a single entry in the table to which we write
- a vector number along with a "valid" bit. Sadly, the layout
- of the table is somewhat counterintuitive. */
+ * Each queue has a single entry in the table to which we write
+ * a vector number along with a "valid" bit. Sadly, the layout
+ * of the table is somewhat counterintuitive.
+ */
if (rx_queue > IGBVF_NO_QUEUE) {
index = (rx_queue >> 1);
ivar = array_er32(IVAR0, index);
/**
* igbvf_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure
*
* igbvf_configure_msix sets up the hardware to properly
* generate MSI-X interrupts.
/**
* igbvf_set_interrupt_capability - set MSI or MSI-X if supported
+ * @adapter: board private structure
*
* Attempt to configure interrupts using the best available
* capabilities of the hardware and kernel.
int err = -ENOMEM;
int i;
- /* we allocate 3 vectors, 1 for tx, 1 for rx, one for pf messages */
+ /* we allocate 3 vectors, 1 for Tx, 1 for Rx, one for PF messages */
adapter->msix_entries = kcalloc(3, sizeof(struct msix_entry),
- GFP_KERNEL);
+ GFP_KERNEL);
if (adapter->msix_entries) {
for (i = 0; i < 3; i++)
adapter->msix_entries[i].entry = i;
err = pci_enable_msix_range(adapter->pdev,
- adapter->msix_entries, 3, 3);
+ adapter->msix_entries, 3, 3);
}
if (err < 0) {
/* MSI-X failed */
dev_err(&adapter->pdev->dev,
- "Failed to initialize MSI-X interrupts.\n");
+ "Failed to initialize MSI-X interrupts.\n");
igbvf_reset_interrupt_capability(adapter);
}
}
/**
* igbvf_request_msix - Initialize MSI-X interrupts
+ * @adapter: board private structure
*
* igbvf_request_msix allocates MSI-X vectors and requests interrupts from the
* kernel.
}
err = request_irq(adapter->msix_entries[vector].vector,
- igbvf_intr_msix_tx, 0, adapter->tx_ring->name,
- netdev);
+ igbvf_intr_msix_tx, 0, adapter->tx_ring->name,
+ netdev);
if (err)
goto out;
vector++;
err = request_irq(adapter->msix_entries[vector].vector,
- igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
- netdev);
+ igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
+ netdev);
if (err)
goto out;
vector++;
err = request_irq(adapter->msix_entries[vector].vector,
- igbvf_msix_other, 0, netdev->name, netdev);
+ igbvf_msix_other, 0, netdev->name, netdev);
if (err)
goto out;
/**
* igbvf_request_irq - initialize interrupts
+ * @adapter: board private structure
*
* Attempts to configure interrupts using the best available
* capabilities of the hardware and kernel.
return err;
dev_err(&adapter->pdev->dev,
- "Unable to allocate interrupt, Error: %d\n", err);
+ "Unable to allocate interrupt, Error: %d\n", err);
return err;
}
/**
* igbvf_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
**/
static void igbvf_irq_disable(struct igbvf_adapter *adapter)
{
/**
* igbvf_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
**/
static void igbvf_irq_enable(struct igbvf_adapter *adapter)
{
if (hw->mac.ops.set_vfta(hw, vid, false)) {
dev_err(&adapter->pdev->dev,
- "Failed to remove vlan id %d\n", vid);
+ "Failed to remove vlan id %d\n", vid);
return -EINVAL;
}
clear_bit(vid, adapter->active_vlans);
/* Turn off Relaxed Ordering on head write-backs. The writebacks
* MUST be delivered in order or it will completely screw up
- * our bookeeping.
+ * our bookkeeping.
*/
dca_txctrl = er32(DCA_TXCTRL(0));
dca_txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
u32 srrctl = 0;
srrctl &= ~(E1000_SRRCTL_DESCTYPE_MASK |
- E1000_SRRCTL_BSIZEHDR_MASK |
- E1000_SRRCTL_BSIZEPKT_MASK);
+ E1000_SRRCTL_BSIZEHDR_MASK |
+ E1000_SRRCTL_BSIZEPKT_MASK);
/* Enable queue drop to avoid head of line blocking */
srrctl |= E1000_SRRCTL_DROP_EN;
/* Setup buffer sizes */
srrctl |= ALIGN(adapter->rx_buffer_len, 1024) >>
- E1000_SRRCTL_BSIZEPKT_SHIFT;
+ E1000_SRRCTL_BSIZEPKT_SHIFT;
if (adapter->rx_buffer_len < 2048) {
adapter->rx_ps_hdr_size = 0;
} else {
adapter->rx_ps_hdr_size = 128;
srrctl |= adapter->rx_ps_hdr_size <<
- E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
}
rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc);
- /*
- * Setup the HW Rx Head and Tail Descriptor Pointers and
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
* the Base and Length of the Rx Descriptor Ring
*/
rdba = rx_ring->dma;
igbvf_setup_srrctl(adapter);
igbvf_configure_rx(adapter);
igbvf_alloc_rx_buffers(adapter->rx_ring,
- igbvf_desc_unused(adapter->rx_ring));
+ igbvf_desc_unused(adapter->rx_ring));
}
/* igbvf_reset - bring the hardware into a known good state
+ * @adapter: private board structure
*
* This function boots the hardware and enables some settings that
* require a configuration cycle of the hardware - those cannot be
hw->mac.get_link_status = 1;
mod_timer(&adapter->watchdog_timer, jiffies + 1);
-
return 0;
}
struct e1000_hw *hw = &adapter->hw;
u32 rxdctl, txdctl;
- /*
- * signal that we're down so the interrupt handler does not
+ /* signal that we're down so the interrupt handler does not
* reschedule our watchdog timer
*/
set_bit(__IGBVF_DOWN, &adapter->state);
if (err)
goto err_setup_rx;
- /*
- * before we allocate an interrupt, we must be ready to handle it.
+ /* before we allocate an interrupt, we must be ready to handle it.
* Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
* as soon as we call pci_request_irq, so we have to setup our
* clean_rx handler before we do so.
return 0;
}
+
/**
* igbvf_set_mac - Change the Ethernet Address of the NIC
* @netdev: network interface device structure
return 0;
}
-#define UPDATE_VF_COUNTER(reg, name) \
- { \
- u32 current_counter = er32(reg); \
- if (current_counter < adapter->stats.last_##name) \
- adapter->stats.name += 0x100000000LL; \
- adapter->stats.last_##name = current_counter; \
- adapter->stats.name &= 0xFFFFFFFF00000000LL; \
- adapter->stats.name |= current_counter; \
- }
+#define UPDATE_VF_COUNTER(reg, name) \
+{ \
+ u32 current_counter = er32(reg); \
+ if (current_counter < adapter->stats.last_##name) \
+ adapter->stats.name += 0x100000000LL; \
+ adapter->stats.last_##name = current_counter; \
+ adapter->stats.name &= 0xFFFFFFFF00000000LL; \
+ adapter->stats.name |= current_counter; \
+}
/**
* igbvf_update_stats - Update the board statistics counters
struct e1000_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
- /*
- * Prevent stats update while adapter is being reset, link is down
+ /* Prevent stats update while adapter is being reset, link is down
* or if the pci connection is down.
*/
if (adapter->link_speed == 0)
**/
static void igbvf_watchdog(unsigned long data)
{
- struct igbvf_adapter *adapter = (struct igbvf_adapter *) data;
+ struct igbvf_adapter *adapter = (struct igbvf_adapter *)data;
/* Do the rest outside of interrupt context */
schedule_work(&adapter->watchdog_task);
static void igbvf_watchdog_task(struct work_struct *work)
{
struct igbvf_adapter *adapter = container_of(work,
- struct igbvf_adapter,
- watchdog_task);
+ struct igbvf_adapter,
+ watchdog_task);
struct net_device *netdev = adapter->netdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
struct igbvf_ring *tx_ring = adapter->tx_ring;
if (link) {
if (!netif_carrier_ok(netdev)) {
mac->ops.get_link_up_info(&adapter->hw,
- &adapter->link_speed,
- &adapter->link_duplex);
+ &adapter->link_speed,
+ &adapter->link_duplex);
igbvf_print_link_info(adapter);
netif_carrier_on(netdev);
igbvf_update_stats(adapter);
} else {
tx_pending = (igbvf_desc_unused(tx_ring) + 1 <
- tx_ring->count);
+ tx_ring->count);
if (tx_pending) {
- /*
- * We've lost link, so the controller stops DMA,
+ /* We've lost link, so the controller stops DMA,
* but we've got queued Tx work that's never going
* to get done, so reset controller to flush Tx.
* (Do the reset outside of interrupt context).
round_jiffies(jiffies + (2 * HZ)));
}
-#define IGBVF_TX_FLAGS_CSUM 0x00000001
-#define IGBVF_TX_FLAGS_VLAN 0x00000002
-#define IGBVF_TX_FLAGS_TSO 0x00000004
-#define IGBVF_TX_FLAGS_IPV4 0x00000008
-#define IGBVF_TX_FLAGS_VLAN_MASK 0xffff0000
-#define IGBVF_TX_FLAGS_VLAN_SHIFT 16
+#define IGBVF_TX_FLAGS_CSUM 0x00000001
+#define IGBVF_TX_FLAGS_VLAN 0x00000002
+#define IGBVF_TX_FLAGS_TSO 0x00000004
+#define IGBVF_TX_FLAGS_IPV4 0x00000008
+#define IGBVF_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IGBVF_TX_FLAGS_VLAN_SHIFT 16
static int igbvf_tso(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring,
+ struct igbvf_ring *tx_ring,
struct sk_buff *skb, u32 tx_flags, u8 *hdr_len,
__be16 protocol)
{
if (protocol == htons(ETH_P_IP)) {
struct iphdr *iph = ip_hdr(skb);
+
iph->tot_len = 0;
iph->check = 0;
tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP,
- 0);
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
} else if (skb_is_gso_v6(skb)) {
ipv6_hdr(skb)->payload_len = 0;
tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
}
i = tx_ring->next_to_use;
}
static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring,
+ struct igbvf_ring *tx_ring,
struct sk_buff *skb, u32 tx_flags,
__be16 protocol)
{
info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
if (skb->ip_summed == CHECKSUM_PARTIAL)
info |= (skb_transport_header(skb) -
- skb_network_header(skb));
-
+ skb_network_header(skb));
context_desc->vlan_macip_lens = cpu_to_le32(info);
netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it.
+ */
smp_mb();
/* We need to check again just in case room has been made available */
return 0;
}
-#define IGBVF_MAX_TXD_PWR 16
-#define IGBVF_MAX_DATA_PER_TXD (1 << IGBVF_MAX_TXD_PWR)
+#define IGBVF_MAX_TXD_PWR 16
+#define IGBVF_MAX_DATA_PER_TXD (1 << IGBVF_MAX_TXD_PWR)
static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring,
+ struct igbvf_ring *tx_ring,
struct sk_buff *skb)
{
struct igbvf_buffer *buffer_info;
if (dma_mapping_error(&pdev->dev, buffer_info->dma))
goto dma_error;
-
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
const struct skb_frag_struct *frag;
buffer_info->time_stamp = jiffies;
buffer_info->mapped_as_page = true;
buffer_info->dma = skb_frag_dma_map(&pdev->dev, frag, 0, len,
- DMA_TO_DEVICE);
+ DMA_TO_DEVICE);
if (dma_mapping_error(&pdev->dev, buffer_info->dma))
goto dma_error;
}
/* clear timestamp and dma mappings for remaining portion of packet */
while (count--) {
- if (i==0)
+ if (i == 0)
i += tx_ring->count;
i--;
buffer_info = &tx_ring->buffer_info[i];
}
static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring,
+ struct igbvf_ring *tx_ring,
int tx_flags, int count,
unsigned int first, u32 paylen,
- u8 hdr_len)
+ u8 hdr_len)
{
union e1000_adv_tx_desc *tx_desc = NULL;
struct igbvf_buffer *buffer_info;
unsigned int i;
cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
- E1000_ADVTXD_DCMD_DEXT);
+ E1000_ADVTXD_DCMD_DEXT);
if (tx_flags & IGBVF_TX_FLAGS_VLAN)
cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
tx_desc->read.cmd_type_len =
- cpu_to_le32(cmd_type_len | buffer_info->length);
+ cpu_to_le32(cmd_type_len | buffer_info->length);
tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
i++;
if (i == tx_ring->count)
/* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
- * such as IA-64). */
+ * such as IA-64).
+ */
wmb();
tx_ring->buffer_info[first].next_to_watch = tx_desc;
tx_ring->next_to_use = i;
writel(i, adapter->hw.hw_addr + tx_ring->tail);
/* we need this if more than one processor can write to our tail
- * at a time, it syncronizes IO on IA64/Altix systems */
+ * at a time, it synchronizes IO on IA64/Altix systems
+ */
mmiowb();
}
return NETDEV_TX_OK;
}
- /*
- * need: count + 4 desc gap to keep tail from touching
- * + 2 desc gap to keep tail from touching head,
- * + 1 desc for skb->data,
- * + 1 desc for context descriptor,
+ /* need: count + 4 desc gap to keep tail from touching
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for skb->data,
+ * + 1 desc for context descriptor,
* head, otherwise try next time
*/
if (igbvf_maybe_stop_tx(netdev, skb_shinfo(skb)->nr_frags + 4)) {
if (tso)
tx_flags |= IGBVF_TX_FLAGS_TSO;
else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags, protocol) &&
- (skb->ip_summed == CHECKSUM_PARTIAL))
+ (skb->ip_summed == CHECKSUM_PARTIAL))
tx_flags |= IGBVF_TX_FLAGS_CSUM;
- /*
- * count reflects descriptors mapped, if 0 then mapping error
+ /* count reflects descriptors mapped, if 0 then mapping error
* has occurred and we need to rewind the descriptor queue
*/
count = igbvf_tx_map_adv(adapter, tx_ring, skb);
static void igbvf_reset_task(struct work_struct *work)
{
struct igbvf_adapter *adapter;
+
adapter = container_of(work, struct igbvf_adapter, reset_task);
igbvf_reinit_locked(adapter);
}
while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
- msleep(1);
+ usleep_range(1000, 2000);
/* igbvf_down has a dependency on max_frame_size */
adapter->max_frame_size = max_frame;
if (netif_running(netdev))
igbvf_down(adapter);
- /*
- * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
* larger slab size.
* i.e. RXBUFFER_2048 --> size-4096 slab
adapter->rx_buffer_len = PAGE_SIZE / 2;
#endif
-
/* adjust allocation if LPE protects us, and we aren't using SBP */
if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
- (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
+ (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN +
- ETH_FCS_LEN;
+ ETH_FCS_LEN;
dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
- netdev->mtu, new_mtu);
+ netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
if (netif_running(netdev))
}
#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
+/* Polling 'interrupt' - used by things like netconsole to send skbs
* without having to re-enable interrupts. It's not called while
* the interrupt routine is executing.
*/
* this device has been detected.
*/
static pci_ers_result_t igbvf_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
+ pci_channel_state_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct igbvf_adapter *adapter = netdev_priv(netdev);
}
static int igbvf_set_features(struct net_device *netdev,
- netdev_features_t features)
+ netdev_features_t features)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
}
static const struct net_device_ops igbvf_netdev_ops = {
- .ndo_open = igbvf_open,
- .ndo_stop = igbvf_close,
- .ndo_start_xmit = igbvf_xmit_frame,
- .ndo_get_stats = igbvf_get_stats,
- .ndo_set_rx_mode = igbvf_set_multi,
- .ndo_set_mac_address = igbvf_set_mac,
- .ndo_change_mtu = igbvf_change_mtu,
- .ndo_do_ioctl = igbvf_ioctl,
- .ndo_tx_timeout = igbvf_tx_timeout,
- .ndo_vlan_rx_add_vid = igbvf_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = igbvf_vlan_rx_kill_vid,
+ .ndo_open = igbvf_open,
+ .ndo_stop = igbvf_close,
+ .ndo_start_xmit = igbvf_xmit_frame,
+ .ndo_get_stats = igbvf_get_stats,
+ .ndo_set_rx_mode = igbvf_set_multi,
+ .ndo_set_mac_address = igbvf_set_mac,
+ .ndo_change_mtu = igbvf_change_mtu,
+ .ndo_do_ioctl = igbvf_ioctl,
+ .ndo_tx_timeout = igbvf_tx_timeout,
+ .ndo_vlan_rx_add_vid = igbvf_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = igbvf_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = igbvf_netpoll,
+ .ndo_poll_controller = igbvf_netpoll,
#endif
- .ndo_set_features = igbvf_set_features,
+ .ndo_set_features = igbvf_set_features,
};
/**
} else {
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting\n");
goto err_dma;
}
}
err = -EIO;
adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
+ pci_resource_len(pdev, 0));
if (!adapter->hw.hw_addr)
goto err_ioremap;
adapter->bd_number = cards_found++;
netdev->hw_features = NETIF_F_SG |
- NETIF_F_IP_CSUM |
+ NETIF_F_IP_CSUM |
NETIF_F_IPV6_CSUM |
NETIF_F_TSO |
NETIF_F_TSO6 |
NETIF_F_RXCSUM;
netdev->features = netdev->hw_features |
- NETIF_F_HW_VLAN_CTAG_TX |
- NETIF_F_HW_VLAN_CTAG_RX |
- NETIF_F_HW_VLAN_CTAG_FILTER;
+ NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_CTAG_FILTER;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
if (err)
dev_info(&pdev->dev, "Error reading MAC address.\n");
else if (is_zero_ether_addr(adapter->hw.mac.addr))
- dev_info(&pdev->dev, "MAC address not assigned by administrator.\n");
+ dev_info(&pdev->dev,
+ "MAC address not assigned by administrator.\n");
memcpy(netdev->dev_addr, adapter->hw.mac.addr,
netdev->addr_len);
}
dev_info(&pdev->dev, "Assigning random MAC address.\n");
eth_hw_addr_random(netdev);
memcpy(adapter->hw.mac.addr, netdev->dev_addr,
- netdev->addr_len);
+ netdev->addr_len);
}
setup_timer(&adapter->watchdog_timer, &igbvf_watchdog,
- (unsigned long) adapter);
+ (unsigned long)adapter);
INIT_WORK(&adapter->reset_task, igbvf_reset_task);
INIT_WORK(&adapter->watchdog_task, igbvf_watchdog_task);
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- /*
- * The watchdog timer may be rescheduled, so explicitly
+ /* The watchdog timer may be rescheduled, so explicitly
* disable it from being rescheduled.
*/
set_bit(__IGBVF_DOWN, &adapter->state);
igbvf_reset_interrupt_capability(adapter);
- /*
- * it is important to delete the napi struct prior to freeing the
- * rx ring so that you do not end up with null pointer refs
+ /* it is important to delete the NAPI struct prior to freeing the
+ * Rx ring so that you do not end up with null pointer refs
*/
netif_napi_del(&adapter->rx_ring->napi);
kfree(adapter->tx_ring);
/* PCI Device API Driver */
static struct pci_driver igbvf_driver = {
- .name = igbvf_driver_name,
- .id_table = igbvf_pci_tbl,
- .probe = igbvf_probe,
- .remove = igbvf_remove,
+ .name = igbvf_driver_name,
+ .id_table = igbvf_pci_tbl,
+ .probe = igbvf_probe,
+ .remove = igbvf_remove,
#ifdef CONFIG_PM
/* Power Management Hooks */
- .suspend = igbvf_suspend,
- .resume = igbvf_resume,
+ .suspend = igbvf_suspend,
+ .resume = igbvf_resume,
#endif
- .shutdown = igbvf_shutdown,
- .err_handler = &igbvf_err_handler
+ .shutdown = igbvf_shutdown,
+ .err_handler = &igbvf_err_handler
};
/**
static int __init igbvf_init_module(void)
{
int ret;
+
pr_info("%s - version %s\n", igbvf_driver_string, igbvf_driver_version);
pr_info("%s\n", igbvf_copyright);
}
module_exit(igbvf_exit_module);
-
MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
MODULE_DESCRIPTION("Intel(R) Gigabit Virtual Function Network Driver");
MODULE_LICENSE("GPL");
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
#ifndef _E1000_REGS_H_
#define _E1000_REGS_H_
-#define E1000_CTRL 0x00000 /* Device Control - RW */
-#define E1000_STATUS 0x00008 /* Device Status - RO */
-#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
-#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
-#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
-#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
-#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
-#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
-#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
-#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
-#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
-#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
-/*
- * Convenience macros
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
+
+/* Convenience macros
*
* Note: "_n" is the queue number of the register to be written to.
*
* Example usage:
* E1000_RDBAL_REG(current_rx_queue)
*/
-#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
- (0x0C000 + ((_n) * 0x40)))
-#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
- (0x0C004 + ((_n) * 0x40)))
-#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
- (0x0C008 + ((_n) * 0x40)))
-#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
- (0x0C00C + ((_n) * 0x40)))
-#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
- (0x0C010 + ((_n) * 0x40)))
-#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
- (0x0C018 + ((_n) * 0x40)))
-#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
- (0x0C028 + ((_n) * 0x40)))
-#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
- (0x0E000 + ((_n) * 0x40)))
-#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
- (0x0E004 + ((_n) * 0x40)))
-#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
- (0x0E008 + ((_n) * 0x40)))
-#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
- (0x0E010 + ((_n) * 0x40)))
-#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
- (0x0E018 + ((_n) * 0x40)))
-#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
- (0x0E028 + ((_n) * 0x40)))
-#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
-#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
-#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
- (0x054E0 + ((_i - 16) * 8)))
-#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
- (0x054E4 + ((_i - 16) * 8)))
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
+ (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
+ (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
+ (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
+ (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
+ (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
+ (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
+ (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
+ (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
+ (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
+ (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
+ (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
+ (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
+ (0x0E028 + ((_n) * 0x40)))
+#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
+#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x054E4 + ((_i - 16) * 8)))
/* Statistics registers */
-#define E1000_VFGPRC 0x00F10
-#define E1000_VFGORC 0x00F18
-#define E1000_VFMPRC 0x00F3C
-#define E1000_VFGPTC 0x00F14
-#define E1000_VFGOTC 0x00F34
-#define E1000_VFGOTLBC 0x00F50
-#define E1000_VFGPTLBC 0x00F44
-#define E1000_VFGORLBC 0x00F48
-#define E1000_VFGPRLBC 0x00F40
+#define E1000_VFGPRC 0x00F10
+#define E1000_VFGORC 0x00F18
+#define E1000_VFMPRC 0x00F3C
+#define E1000_VFGPTC 0x00F14
+#define E1000_VFGOTC 0x00F34
+#define E1000_VFGOTLBC 0x00F50
+#define E1000_VFGPTLBC 0x00F44
+#define E1000_VFGORLBC 0x00F48
+#define E1000_VFGPRLBC 0x00F40
/* These act per VF so an array friendly macro is used */
-#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
-#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
+#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
+#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
/* Define macros for handling registers */
-#define er32(reg) readl(hw->hw_addr + E1000_##reg)
-#define ew32(reg, val) writel((val), hw->hw_addr + E1000_##reg)
+#define er32(reg) readl(hw->hw_addr + E1000_##reg)
+#define ew32(reg, val) writel((val), hw->hw_addr + E1000_##reg)
#define array_er32(reg, offset) \
readl(hw->hw_addr + E1000_##reg + (offset << 2))
#define array_ew32(reg, offset, val) \
writel((val), hw->hw_addr + E1000_##reg + (offset << 2))
-#define e1e_flush() er32(STATUS)
+#define e1e_flush() er32(STATUS)
#endif
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
*******************************************************************************/
-
#include "vf.h"
static s32 e1000_check_for_link_vf(struct e1000_hw *hw);
static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
- u16 *duplex);
+ u16 *duplex);
static s32 e1000_init_hw_vf(struct e1000_hw *hw);
static s32 e1000_reset_hw_vf(struct e1000_hw *hw);
static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *,
- u32, u32, u32);
+ u32, u32, u32);
static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32);
static s32 e1000_read_mac_addr_vf(struct e1000_hw *);
static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool);
* the status register's data which is often stale and inaccurate.
**/
static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
- u16 *duplex)
+ u16 *duplex)
{
s32 status;
u8 *addr = (u8 *)(&msgbuf[1]);
u32 ctrl;
- /* assert vf queue/interrupt reset */
+ /* assert VF queue/interrupt reset */
ctrl = er32(CTRL);
ew32(CTRL, ctrl | E1000_CTRL_RST);
/* mailbox timeout can now become active */
mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT;
- /* notify pf of vf reset completion */
+ /* notify PF of VF reset completion */
msgbuf[0] = E1000_VF_RESET;
mbx->ops.write_posted(hw, msgbuf, 1);
/* set our "perm_addr" based on info provided by PF */
ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
if (!ret_val) {
- if (msgbuf[0] == (E1000_VF_RESET | E1000_VT_MSGTYPE_ACK))
+ if (msgbuf[0] == (E1000_VF_RESET |
+ E1000_VT_MSGTYPE_ACK))
memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
else
ret_val = -E1000_ERR_MAC_INIT;
/* Register count multiplied by bits per register */
hash_mask = (hw->mac.mta_reg_count * 32) - 1;
- /*
- * The bit_shift is the number of left-shifts
+ /* The bit_shift is the number of left-shifts
* where 0xFF would still fall within the hash mask.
*/
while (hash_mask >> bit_shift != 0xFF)
bit_shift++;
hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
- (((u16) mc_addr[5]) << bit_shift)));
+ (((u16)mc_addr[5]) << bit_shift)));
return hash_value;
}
* unless there are workarounds that change this.
**/
static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count,
- u32 rar_used_count, u32 rar_count)
+ u8 *mc_addr_list, u32 mc_addr_count,
+ u32 rar_used_count, u32 rar_count)
{
struct e1000_mbx_info *mbx = &hw->mbx;
u32 msgbuf[E1000_VFMAILBOX_SIZE];
* @addr: pointer to the receive address
* @index: receive address array register
**/
-static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
+static void e1000_rar_set_vf(struct e1000_hw *hw, u8 *addr, u32 index)
{
struct e1000_mbx_info *mbx = &hw->mbx;
u32 msgbuf[3];
s32 ret_val = E1000_SUCCESS;
u32 in_msg = 0;
- /*
- * We only want to run this if there has been a rst asserted.
+ /* We only want to run this if there has been a rst asserted.
* in this case that could mean a link change, device reset,
* or a virtual function reset
*/
if (!mac->get_link_status)
goto out;
- /* if link status is down no point in checking to see if pf is up */
+ /* if link status is down no point in checking to see if PF is up */
if (!(er32(STATUS) & E1000_STATUS_LU))
goto out;
/* if the read failed it could just be a mailbox collision, best wait
- * until we are called again and don't report an error */
+ * until we are called again and don't report an error
+ */
if (mbx->ops.read(hw, &in_msg, 1))
goto out;
/* if incoming message isn't clear to send we are waiting on response */
if (!(in_msg & E1000_VT_MSGTYPE_CTS)) {
- /* message is not CTS and is NACK we must have lost CTS status */
+ /* msg is not CTS and is NACK we must have lost CTS status */
if (in_msg & E1000_VT_MSGTYPE_NACK)
ret_val = -E1000_ERR_MAC_INIT;
goto out;
}
- /* the pf is talking, if we timed out in the past we reinit */
+ /* the PF is talking, if we timed out in the past we reinit */
if (!mbx->timeout) {
ret_val = -E1000_ERR_MAC_INIT;
goto out;
}
/* if we passed all the tests above then the link is up and we no
- * longer need to check for link */
+ * longer need to check for link
+ */
mac->get_link_status = false;
out:
more details.
You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
struct e1000_hw;
-#define E1000_DEV_ID_82576_VF 0x10CA
-#define E1000_DEV_ID_I350_VF 0x1520
-#define E1000_REVISION_0 0
-#define E1000_REVISION_1 1
-#define E1000_REVISION_2 2
-#define E1000_REVISION_3 3
-#define E1000_REVISION_4 4
+#define E1000_DEV_ID_82576_VF 0x10CA
+#define E1000_DEV_ID_I350_VF 0x1520
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
+#define E1000_REVISION_4 4
-#define E1000_FUNC_0 0
-#define E1000_FUNC_1 1
+#define E1000_FUNC_0 0
+#define E1000_FUNC_1 1
-/*
- * Receive Address Register Count
+/* Receive Address Register Count
* Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor.
* These entries are also used for MAC-based filtering.
*/
-#define E1000_RAR_ENTRIES_VF 1
+#define E1000_RAR_ENTRIES_VF 1
/* Receive Descriptor - Advanced */
union e1000_adv_rx_desc {
struct {
- u64 pkt_addr; /* Packet buffer address */
- u64 hdr_addr; /* Header buffer address */
+ u64 pkt_addr; /* Packet buffer address */
+ u64 hdr_addr; /* Header buffer address */
} read;
struct {
struct {
u32 data;
struct {
u16 pkt_info; /* RSS/Packet type */
- u16 hdr_info; /* Split Header,
- * hdr buffer length */
+ /* Split Header, hdr buffer length */
+ u16 hdr_info;
} hs_rss;
} lo_dword;
union {
- u32 rss; /* RSS Hash */
+ u32 rss; /* RSS Hash */
struct {
- u16 ip_id; /* IP id */
- u16 csum; /* Packet Checksum */
+ u16 ip_id; /* IP id */
+ u16 csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
- u32 status_error; /* ext status/error */
- u16 length; /* Packet length */
- u16 vlan; /* VLAN tag */
+ u32 status_error; /* ext status/error */
+ u16 length; /* Packet length */
+ u16 vlan; /* VLAN tag */
} upper;
} wb; /* writeback */
};
-#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
-#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
/* Transmit Descriptor - Advanced */
union e1000_adv_tx_desc {
struct {
- u64 buffer_addr; /* Address of descriptor's data buf */
+ u64 buffer_addr; /* Address of descriptor's data buf */
u32 cmd_type_len;
u32 olinfo_status;
} read;
struct {
- u64 rsvd; /* Reserved */
+ u64 rsvd; /* Reserved */
u32 nxtseq_seed;
u32 status;
} wb;
};
/* Adv Transmit Descriptor Config Masks */
-#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
-#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
-#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
-#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
-#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
-#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
-#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
-#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
+#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
+#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
/* Context descriptors */
struct e1000_adv_tx_context_desc {
u32 mss_l4len_idx;
};
-#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
-#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
-#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
-#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
-#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
enum e1000_mac_type {
e1000_undefined = 0,
void e1000_rlpml_set_vf(struct e1000_hw *, u16);
void e1000_init_function_pointers_vf(struct e1000_hw *hw);
-
#endif /* _E1000_VF_H_ */
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff