e1000e: WoL can fail on 82578DM
authorBruce Allan <bruce.w.allan@intel.com>
Fri, 30 Sep 2011 08:07:05 +0000 (08:07 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Thu, 6 Oct 2011 10:15:27 +0000 (03:15 -0700)
During suspend, the PHY must be reset for workaround updates to take effect
without restarting auto-negotiation.  Also, set the disable GbE and enable
Low Power Link Up (LPLU) if the EEPROM is configured to do likewise in
either D0 or non-D0a instead of just the latter.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/e1000e/ich8lan.c

index 3b063e1ac835dd7391502a350b7a5de1c2cc6142..4ec5a5ad4eb50d0ebe20b2e207e5e8c364189460 100644 (file)
@@ -1319,16 +1319,20 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 
                if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
                        oem_reg |= HV_OEM_BITS_LPLU;
+
+               /* Set Restart auto-neg to activate the bits */
+               if (!e1000_check_reset_block(hw))
+                       oem_reg |= HV_OEM_BITS_RESTART_AN;
        } else {
-               if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE)
+               if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE |
+                              E1000_PHY_CTRL_NOND0A_GBE_DISABLE))
                        oem_reg |= HV_OEM_BITS_GBE_DIS;
 
-               if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU)
+               if (mac_reg & (E1000_PHY_CTRL_D0A_LPLU |
+                              E1000_PHY_CTRL_NOND0A_LPLU))
                        oem_reg |= HV_OEM_BITS_LPLU;
        }
-       /* Restart auto-neg to activate the bits */
-       if (!e1000_check_reset_block(hw))
-               oem_reg |= HV_OEM_BITS_RESTART_AN;
+
        ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
 
 out:
@@ -3684,6 +3688,7 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 
        if (hw->mac.type >= e1000_pchlan) {
                e1000_oem_bits_config_ich8lan(hw, false);
+               e1000_phy_hw_reset_ich8lan(hw);
                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        return;