V4L/DVB (8332): cx18: Suport external reset of the Z8F0811 IR controller on HVR-1600...

cx18: added in cx18_ir_reset_gpio function for lirc_pvr150 like module.  Also
added the ability to reset the IR chip via ioctl like ivtv.  This needs the
mutex to protect gpio_dir and gpio_val in struct cx18 as gpio changes can
come from a few different asynchronous sources now.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index 0caae1a5edc4d06b82d1ed45e3e9cdb82ac5c379..8fe5f38c4d7cf694a6a2c9a7738bfffd79324430 100644 (file)
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -88,6 +88,7 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
                .active_lo_mask = 0x3001,
                .msecs_asserted = 10,
                .msecs_recovery = 40,
+               .ir_reset_mask  = 0x0001,
        },
        .i2c = &cx18_i2c_std,
 };
@@ -133,6 +134,7 @@ static const struct cx18_card cx18_card_hvr1600_samsung = {
                .active_lo_mask = 0x3001,
                .msecs_asserted = 10,
                .msecs_recovery = 40,
+               .ir_reset_mask  = 0x0001,
        },
        .i2c = &cx18_i2c_std,
 };

diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index dc283d75690727f814e5cc8046fd12fd27844a91..32155f6e6fe41b35700d69870aff057010f3dcdb 100644 (file)
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -83,6 +83,7 @@ struct cx18_gpio_i2c_slave_reset {
        u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
        int msecs_asserted; /* time period reset must remain asserted */
        int msecs_recovery; /* time after deassert for chips to be ready */
+       u32 ir_reset_mask;  /* GPIO to reset the Zilog Z8F0811 IR contoller */
 };
 
 struct cx18_gpio_audio_input {         /* select tuner/line in input */

diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index d753a40973ba40a7a1abf68e08d551809efabfbb..3d495dba4983d1662b2c2973ca97a1bb87b0ec54 100644 (file)
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -83,6 +83,47 @@ void cx18_reset_i2c_slaves_gpio(struct cx18 *cx)
        mutex_unlock(&cx->gpio_lock);
 }
 
+void cx18_reset_ir_gpio(void *data)
+{
+       struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx;
+       const struct cx18_gpio_i2c_slave_reset *p;
+
+       p = &cx->card->gpio_i2c_slave_reset;
+
+       if (p->ir_reset_mask == 0)
+               return;
+
+       CX18_DEBUG_INFO("Resetting IR microcontroller\n");
+
+       /*
+          Assert timing for the Z8F0811 on HVR-1600 boards:
+          1. Assert RESET for min of 4 clock cycles at 18.432 MHz to initiate
+          2. Reset then takes 66 WDT cycles at 10 kHz + 16 xtal clock cycles
+               (6,601,085 nanoseconds ~= 7 milliseconds)
+          3. DBG pin must be high before chip exits reset for normal operation.
+               DBG is open drain and hopefully pulled high since we don't
+               normally drive it (GPIO 1?) for the HVR-1600
+          4. Z8F0811 won't exit reset until RESET is deasserted
+       */
+       mutex_lock(&cx->gpio_lock);
+       cx->gpio_val = cx->gpio_val & ~p->ir_reset_mask;
+       gpio_write(cx);
+       mutex_unlock(&cx->gpio_lock);
+       schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_asserted));
+
+       /*
+          Zilog comes out of reset, loads reset vector address and executes
+          from there. Required recovery delay unknown.
+       */
+       mutex_lock(&cx->gpio_lock);
+       cx->gpio_val = cx->gpio_val | p->ir_reset_mask;
+       gpio_write(cx);
+       mutex_unlock(&cx->gpio_lock);
+       schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_recovery));
+}
+EXPORT_SYMBOL(cx18_reset_ir_gpio);
+/* This symbol is exported for use by an infrared module for the IR-blaster */
+
 void cx18_gpio_init(struct cx18 *cx)
 {
        mutex_lock(&cx->gpio_lock);

diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h
index 7447fed357676acb2fd8a5c5121825311554b8b4..22cd7ddf8554ba36dc6c8f1e97772ec17bb679d6 100644 (file)
--- a/drivers/media/video/cx18/cx18-gpio.h
+++ b/drivers/media/video/cx18/cx18-gpio.h
@@ -22,5 +22,6 @@
 
 void cx18_gpio_init(struct cx18 *cx);
 void cx18_reset_i2c_slaves_gpio(struct cx18 *cx);
+void cx18_reset_ir_gpio(void *data);
 int cx18_reset_tuner_gpio(void *dev, int cmd, int value);
 int cx18_gpio(struct cx18 *cx, unsigned int command, void *arg);

diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 146a4b85649627570eb767cc5bc7438594a9a861..0d74e59e503eb58a47b7fcf53596f33bfa76a696 100644 (file)
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -754,6 +754,15 @@ static int cx18_default(struct file *file, void *fh, int cmd, void *arg)
                cx18_audio_set_route(cx, route);
                break;
        }
+
+       case VIDIOC_INT_RESET: {
+               u32 val = *(u32 *)arg;
+
+               if ((val == 0) || (val & 0x01))
+                       cx18_reset_ir_gpio(&cx->i2c_algo_cb_data[0]);
+               break;
+       }
+
        default:
                return -EINVAL;
        }