--- /dev/null
+###############################################################################
+# NFC Configuration for NON-HAL component S3FWRN5
+# Samsung Electronics, System LSI Division
+# Update Date : 2015/05/16
+# Configuration case 1 : NFC Standalone & 106k P2P disnabled
+# Region : EU(no eSE) / SKT / KT / LGU
+# F/W Version dependency : NONE
+# This file contains below
+# 1) Default routing information : UICC only (DEFAULT_ISODEP_ROUTE=0x03 & ACTIVE_SE=0x03)
+# 2) Partial AID setting : Disable
+# 3) UICC listen tech mask : 0x03 (Default)
+# 4) Listen tech mask for P2P : 0xC4 (106k P2P disabled)
+# 5) Poll tech mask : 0xEF (Enable All tech - B prime is not supported)
+# 6) eSE warm reset : Enabled
+# 7) Other Information
+
+################################################################################
+# 1) Default routing information & Active SE
+# Precondition
+# seId : 0x00(Host) 0x02(eSE), 0x03(UICC)
+################################################################################
+# DEFAULT_ISODEP_ROUTE
+# Descrption : Default ISODEP route path for specific seId. If no value is selected, 0x03 (UICC SE) is the default value.
+# Guide
+# HCE only : 0x00
+# eSE only : 0x02
+# Use UICC (NFC Standalone or UICC+eSE) : 0x03
+################################################################################
+# ACTIVE_SE
+# Descrption : seId of Active SE for setting default TECH/Protocol routing
+# Guide
+# HCE only : 0x00
+# use eSE as CE mode (eSE only,UICC+eSE) : 0x02
+# Use UICC only (NFC Standalone or eSE disabled as CE mode): 0x03
+################################################################################
+# Example
+# HCE only (SPRINT / USCC) : DEFAULT_ISODEP_ROUTE=0x03 or No setting / ACTIVE_SE=0x00
+# eSE as CE mode only : DEFAULT_ISODEP_ROUTE=0x02 / ACTIVE_SE=0x02
+# Any UICC + eSE as CE mode : DEFAULT_ISODEP_ROUTE=0x03 / ACTIVE_SE=0x02
+# UICC only (NFC Standalone or eSE disabled as CE mode) : DEFAULT_ISODEP_ROUTE=0x03 / ACTIVE_SE=0x03
+DEFAULT_ISODEP_ROUTE=0x03
+ACTIVE_SE=0x03
+
+###############################################################################
+# 2) Partial AID setting : Only used for ATT / TMO / VZW
+# This configuration may be changed by MNO specific requirement.
+# Description
+# 1st byte : NCI Length
+# 2nd byte : Number of set
+# 3rd~ bytes : Partial matching order
+# Matching value : Full matching = 0x00, Subset Matching = 0x01, Superset Matching : 0x02, Pattern Matching : 0x03
+# ex) 2f 39 03 02 01 02 --> order : full matching - subset matching - superset matching PARTIAL_AID={03:02:01:02}
+# PARTIAL_AID={02:01:02}
+
+###############################################################################
+# Guide for tech mask
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A 0x01
+# NFA_TECHNOLOGY_MASK_B 0x02
+# NFA_TECHNOLOGY_MASK_F 0x04
+# NFA_TECHNOLOGY_MASK_ISO15693 0x08
+# NFA_TECHNOLOGY_MASK_B_PRIME 0x10
+# NFA_TECHNOLOGY_MASK_KOVIO 0x20
+# NFA_TECHNOLOGY_MASK_A_ACTIVE 0x40
+# NFA_TECHNOLOGY_MASK_F_ACTIVE 0x80
+# Example :
+# Polling mask for A / B / F / V(15693) / Kovio / Active A / Active F
+# NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
+# 0x01 | 0x02 | 0x04 | 0x08 | 0x20 | 0x40
+# => POLLING_TECH_MASK=0xEF
+
+###############################################################################
+# 3) UICC listen tech mask
+# Force UICC to only listen to the following technology(s).
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B.
+# If this option is blocked by # comment, default value will be applied
+###############################################################################
+# Description
+# Oring each tech mask
+# Type A : 0x01
+# Type B : 0x02
+# Type F : 0x04
+###############################################################################
+# Guide
+# HK : UICC_LISTEN_TECH_MASK=0x07 (Enable Type F card)
+# Other region : UICC_LISTEN_TECH_MASK=0x03 (Default value)
+
+UICC_LISTEN_TECH_MASK=0x03
+
+###############################################################################
+# 4) Listen tech mask for P2P
+# Force tag polling for the following technology(s).
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
+# Current Setting : Enable all poll tech
+POLLING_TECH_MASK=0xEF
+
+###############################################################################
+# 5) Poll tech mask
+# Force P2P to only listen for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
+# NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
+# For HK, P2P_LISTEN_TECH_MASK may be 0xC0 for enhance type F card success ratio
+P2P_LISTEN_TECH_MASK=0xC4
+
+###############################################################################
+# Maximum Number of Credits to be allowed by the NFCC
+# This value overrides what the NFCC specifices allowing the host to have
+# the control to work-around transport limitations. If this value does
+# not exist or is set to 0, the NFCC will provide the number of credits.
+MAX_RF_DATA_CREDITS=1
+
+###############################################################################
+# When disconnecting from Oberthur secure element, perform a warm-reset of
+# the secure element to deselect the applet.
+# The default hex value of the command is 0x3. If this variable is undefined,
+# then this feature is not used.
+# 6) OBERTHUR_WARM_RESET_COMMAND must be enabled for all eSE model
+OBERTHUR_WARM_RESET_COMMAND=0x03
+
+###############################################################################
+# 7) Presence Check Method
+# PRESENCE_CHECK_ALGORITHM=0 : [default] Automatic select for below 4 method.
+# PRESENCE_CHECK_ALGORITHM=1 : Read Empty I block.
+# PRESENCE_CHECK_ALGORITHM=2 : Sleep/Wakeup Command
+# PRESENCE_CHECK_ALGORITHM=3 : Read binary for CH0(K version method)
+# PRESENCE_CHECK_ALGORITHM=4 : Read binary for CH3
+# Default : No use (AUTO)
+# For China Region : Use Method 3
+###############################################################################
+PRESENCE_CHECK_ALGORITHM=3
+
+###############################################################################
+# Application options
+APPL_TRACE_LEVEL=0xFF
+PROTOCOL_TRACE_LEVEL=0xFFFFFFFF
+
+PRESERVE_STORAGE=1
+
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# power control driver
+# Specify a kernel driver that support ioctl commands to control NFC_EN and
+# NFC_WAKE gpio signals.
+#
+# POWER_CONTRL_DRIVER=<driver>
+# i2c and spi driver may be used to control NFC_EN and NFC_WAKE signal
+POWER_CONTROL_DRIVER="/dev/sec-nfc"
+
+###############################################################################
+# transport driver
+#
+# TRANSPORT_DRIVER=<driver>
+#
+# where <driver> can be, for example:
+# "/dev/ttyS" (UART)
+# "/dev/bcmi2cnfc" (I2C)
+# "hwtun" (HW Tunnel)
+# "/dev/bcmspinfc" (SPI)
+# "/dev/btusb0" (BT USB)
+TRANSPORT_DRIVER="/dev/sec-nfc"
+
+###############################################################################
+# Default poll duration (in ms)
+# The defualt is 500ms if not set (see nfc_target.h) same as M project
+NFA_DM_DISC_DURATION_POLL=500
+
+###############################################################################
+# When screen is turned off, specify the desired power state of the controller.
+# 0: power-off-sleep state; DEFAULT
+# 1: full-power state
+# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
+# 3: FPM CE in snooze mode, Switch Off, Battery Off still available.
+SCREEN_OFF_POWER_STATE=3
+
+###############################################################################
+# NCI Hal Module name
+NCI_HAL_MODULE="nfc_nci"
projects / GitHub / LineageOS / android_device_samsung_s5neolte.git / commitdiff