*
* The bitmaps don't have enough data to track fingers, so this function
* only generates points representing a bounding box of at most two contacts.
- * These two points are returned in x1, y1, x2, and y2.
+ * These two points are returned in fields->mt.
*/
static void alps_process_bitmap_dolphin(struct alps_data *priv,
- struct alps_fields *fields,
- int *x1, int *y1, int *x2, int *y2)
+ struct alps_fields *fields)
{
int box_middle_x, box_middle_y;
unsigned int x_map, y_map;
if (x_msb > priv->x_bits || y_msb > priv->y_bits)
return;
- *x1 = *y1 = *x2 = *y2 = 0;
-
if (fields->fingers > 1) {
start_bit = priv->x_bits - x_msb;
end_bit = priv->x_bits - x_lsb;
end_bit = y_msb - 1;
box_middle_y = (priv->y_max * (start_bit + end_bit)) /
(2 * (priv->y_bits - 1));
- *x1 = fields->x;
- *y1 = fields->y;
- *x2 = 2 * box_middle_x - *x1;
- *y2 = 2 * box_middle_y - *y1;
+ fields->mt[0] = fields->st;
+ fields->mt[1].x = 2 * box_middle_x - fields->mt[0].x;
+ fields->mt[1].y = 2 * box_middle_y - fields->mt[0].y;
}
}
*
* The bitmaps don't have enough data to track fingers, so this function
* only generates points representing a bounding box of all contacts.
- * These points are returned in x1, y1, x2, and y2 when the return value
+ * These points are returned in fields->mt when the return value
* is greater than 0.
*/
static int alps_process_bitmap(struct alps_data *priv,
- unsigned int x_map, unsigned int y_map,
- int *x1, int *y1, int *x2, int *y2)
+ struct alps_fields *fields)
{
int i, fingers_x = 0, fingers_y = 0, fingers;
struct alps_bitmap_point x_low = {0,}, x_high = {0,};
struct alps_bitmap_point y_low = {0,}, y_high = {0,};
- if (!x_map || !y_map)
+ if (!fields->x_map || !fields->y_map)
return 0;
- *x1 = *y1 = *x2 = *y2 = 0;
-
- alps_get_bitmap_points(x_map, &x_low, &x_high, &fingers_x);
- alps_get_bitmap_points(y_map, &y_low, &y_high, &fingers_y);
+ alps_get_bitmap_points(fields->x_map, &x_low, &x_high, &fingers_x);
+ alps_get_bitmap_points(fields->y_map, &y_low, &y_high, &fingers_y);
/*
* Fingers can overlap, so we use the maximum count of fingers
y_high.num_bits = max(i, 1);
}
- *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
- (2 * (priv->x_bits - 1));
- *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
- (2 * (priv->y_bits - 1));
+ fields->mt[0].x =
+ (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) /
+ (2 * (priv->x_bits - 1));
+ fields->mt[0].y =
+ (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) /
+ (2 * (priv->y_bits - 1));
- *x2 = (priv->x_max *
- (2 * x_high.start_bit + x_high.num_bits - 1)) /
- (2 * (priv->x_bits - 1));
- *y2 = (priv->y_max *
- (2 * y_high.start_bit + y_high.num_bits - 1)) /
- (2 * (priv->y_bits - 1));
+ fields->mt[1].x =
+ (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) /
+ (2 * (priv->x_bits - 1));
+ fields->mt[1].y =
+ (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) /
+ (2 * (priv->y_bits - 1));
/* y-bitmap order is reversed, except on rushmore */
if (!(priv->flags & ALPS_IS_RUSHMORE)) {
- *y1 = priv->y_max - *y1;
- *y2 = priv->y_max - *y2;
+ fields->mt[0].y = priv->y_max - fields->mt[0].y;
+ fields->mt[1].y = priv->y_max - fields->mt[1].y;
}
return fingers;
}
}
-static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers,
- int x1, int y1, int x2, int y2)
+static void alps_report_semi_mt_data(struct psmouse *psmouse, int num_fingers)
{
- alps_set_slot(dev, 0, num_fingers != 0, x1, y1);
- alps_set_slot(dev, 1, num_fingers == 2, x2, y2);
+ struct alps_data *priv = psmouse->private;
+ struct input_dev *dev = psmouse->dev;
+ struct alps_fields *f = &priv->f;
+
+ alps_set_slot(dev, 0, num_fingers != 0, f->mt[0].x, f->mt[0].y);
+ alps_set_slot(dev, 1, num_fingers == 2, f->mt[1].x, f->mt[1].y);
}
static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
((p[2] & 0x7f) << 1) |
(p[4] & 0x01);
- f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
+ f->st.x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) |
((p[0] & 0x30) >> 4);
- f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
- f->z = p[5] & 0x7f;
+ f->st.y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f);
+ f->pressure = p[5] & 0x7f;
alps_decode_buttons_v3(f, p);
}
f->is_mp = !!(p[0] & 0x20);
if (!f->is_mp) {
- f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
- f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
- f->z = (p[0] & 4) ? 0 : p[5] & 0x7f;
+ f->st.x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7));
+ f->st.y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3));
+ f->pressure = (p[0] & 4) ? 0 : p[5] & 0x7f;
alps_decode_buttons_v3(f, p);
} else {
f->fingers = ((p[0] & 0x6) >> 1 |
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
struct input_dev *dev2 = priv->dev2;
- int x1 = 0, y1 = 0, x2 = 0, y2 = 0, fingers = 0;
- struct alps_fields f = {0};
+ struct alps_fields *f = &priv->f;
+ int fingers = 0;
+
+ memset(f, 0, sizeof(*f));
- priv->decode_fields(&f, packet, psmouse);
+ priv->decode_fields(f, packet, psmouse);
/*
* There's no single feature of touchpad position and bitmap packets
* packet. Check for this, and when it happens process the
* position packet as usual.
*/
- if (f.is_mp) {
- fingers = f.fingers;
+ if (f->is_mp) {
+ fingers = f->fingers;
if (priv->proto_version == ALPS_PROTO_V3) {
- if (alps_process_bitmap(priv, f.x_map,
- f.y_map, &x1, &y1,
- &x2, &y2) == 0)
+ if (alps_process_bitmap(priv, f) == 0)
fingers = 0; /* Use st data */
/* Now process position packet */
- priv->decode_fields(&f, priv->multi_data,
+ priv->decode_fields(f, priv->multi_data,
psmouse);
} else {
/*
* calculate Pt2, so we need to do position
* packet decode first.
*/
- priv->decode_fields(&f, priv->multi_data,
+ priv->decode_fields(f, priv->multi_data,
psmouse);
/*
* Since Dolphin's finger number is reliable,
* there is no need to compare with bmap_fn.
*/
- alps_process_bitmap_dolphin(priv, &f, &x1, &y1,
- &x2, &y2);
+ alps_process_bitmap_dolphin(priv, f);
}
} else {
priv->multi_packet = 0;
* out misidentified bitmap packets, we reject anything with this
* bit set.
*/
- if (f.is_mp)
+ if (f->is_mp)
return;
- if (!priv->multi_packet && f.first_mp) {
+ if (!priv->multi_packet && f->first_mp) {
priv->multi_packet = 1;
memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
return;
* with x, y, and z all zero, so these seem to be flukes.
* Ignore them.
*/
- if (f.x && f.y && !f.z)
+ if (f->st.x && f->st.y && !f->pressure)
return;
/*
* to rely on ST data.
*/
if (!fingers) {
- x1 = f.x;
- y1 = f.y;
- fingers = f.z > 0 ? 1 : 0;
+ f->mt[0].x = f->st.x;
+ f->mt[0].y = f->st.y;
+ fingers = f->pressure > 0 ? 1 : 0;
}
- if (f.z >= 64)
+ if (f->pressure >= 64)
input_report_key(dev, BTN_TOUCH, 1);
else
input_report_key(dev, BTN_TOUCH, 0);
- alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+ alps_report_semi_mt_data(psmouse, fingers);
input_mt_report_finger_count(dev, fingers);
- input_report_key(dev, BTN_LEFT, f.left);
- input_report_key(dev, BTN_RIGHT, f.right);
- input_report_key(dev, BTN_MIDDLE, f.middle);
+ input_report_key(dev, BTN_LEFT, f->left);
+ input_report_key(dev, BTN_RIGHT, f->right);
+ input_report_key(dev, BTN_MIDDLE, f->middle);
- if (f.z > 0) {
- input_report_abs(dev, ABS_X, f.x);
- input_report_abs(dev, ABS_Y, f.y);
+ if (f->pressure > 0) {
+ input_report_abs(dev, ABS_X, f->st.x);
+ input_report_abs(dev, ABS_Y, f->st.y);
}
- input_report_abs(dev, ABS_PRESSURE, f.z);
+ input_report_abs(dev, ABS_PRESSURE, f->pressure);
input_sync(dev);
if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
- input_report_key(dev2, BTN_LEFT, f.ts_left);
- input_report_key(dev2, BTN_RIGHT, f.ts_right);
- input_report_key(dev2, BTN_MIDDLE, f.ts_middle);
+ input_report_key(dev2, BTN_LEFT, f->ts_left);
+ input_report_key(dev2, BTN_RIGHT, f->ts_right);
+ input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
input_sync(dev2);
}
}
struct alps_data *priv = psmouse->private;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
- int offset;
- int x, y, z;
- int left, right;
- int x1, y1, x2, y2;
- int fingers = 0;
- unsigned int x_bitmap, y_bitmap;
+ struct alps_fields *f = &priv->f;
+ int offset, fingers = 0;
/*
* v4 has a 6-byte encoding for bitmap data, but this data is
if (++priv->multi_packet > 2) {
priv->multi_packet = 0;
- x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) |
+ f->x_map = ((priv->multi_data[2] & 0x1f) << 10) |
((priv->multi_data[3] & 0x60) << 3) |
((priv->multi_data[0] & 0x3f) << 2) |
((priv->multi_data[1] & 0x60) >> 5);
- y_bitmap = ((priv->multi_data[5] & 0x01) << 10) |
+ f->y_map = ((priv->multi_data[5] & 0x01) << 10) |
((priv->multi_data[3] & 0x1f) << 5) |
(priv->multi_data[1] & 0x1f);
- fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap,
- &x1, &y1, &x2, &y2);
-
- /* Store MT data.*/
- priv->fingers = fingers;
- priv->x1 = x1;
- priv->x2 = x2;
- priv->y1 = y1;
- priv->y2 = y2;
+ f->fingers = alps_process_bitmap(priv, f);
}
- left = packet[4] & 0x01;
- right = packet[4] & 0x02;
+ f->left = packet[4] & 0x01;
+ f->right = packet[4] & 0x02;
- x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
- ((packet[0] & 0x30) >> 4);
- y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
- z = packet[5] & 0x7f;
+ f->st.x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
+ ((packet[0] & 0x30) >> 4);
+ f->st.y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
+ f->pressure = packet[5] & 0x7f;
/*
* If there were no contacts in the bitmap, use ST
* points in MT reports.
* If there were two contacts or more, report MT data.
*/
- if (priv->fingers < 2) {
- x1 = x;
- y1 = y;
- fingers = z > 0 ? 1 : 0;
+ if (f->fingers < 2) {
+ f->mt[0].x = f->st.x;
+ f->mt[0].y = f->st.y;
+ fingers = f->pressure > 0 ? 1 : 0;
} else {
- fingers = priv->fingers;
- x1 = priv->x1;
- x2 = priv->x2;
- y1 = priv->y1;
- y2 = priv->y2;
+ fingers = f->fingers;
}
- if (z >= 64)
+ if (f->pressure >= 64)
input_report_key(dev, BTN_TOUCH, 1);
else
input_report_key(dev, BTN_TOUCH, 0);
- alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+ alps_report_semi_mt_data(psmouse, fingers);
input_mt_report_finger_count(dev, fingers);
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev, BTN_LEFT, f->left);
+ input_report_key(dev, BTN_RIGHT, f->right);
- if (z > 0) {
- input_report_abs(dev, ABS_X, x);
- input_report_abs(dev, ABS_Y, y);
+ if (f->pressure > 0) {
+ input_report_abs(dev, ABS_X, f->st.x);
+ input_report_abs(dev, ABS_Y, f->st.y);
}
- input_report_abs(dev, ABS_PRESSURE, z);
+ input_report_abs(dev, ABS_PRESSURE, f->pressure);
input_sync(dev);
}