ALSA: bt87x: Use standard printk helpers

Convert with dev_err() and co from snd_printk(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 06dc7d97cc0ca3f94bfa1308b86b33ee5f179b28..8546711d12f9275c9dba94bbfc1a59476e1c041a 100644 (file)
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -293,17 +293,23 @@ static void snd_bt87x_pci_error(struct snd_bt87x *chip, unsigned int status)
                PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY;
        pci_write_config_word(chip->pci, PCI_STATUS, pci_status);
        if (pci_status != PCI_STATUS_DETECTED_PARITY)
-               snd_printk(KERN_ERR "Aieee - PCI error! status %#08x, PCI status %#04x\n",
+               dev_err(chip->card->dev,
+                       "Aieee - PCI error! status %#08x, PCI status %#04x\n",
                           status & ERROR_INTERRUPTS, pci_status);
        else {
-               snd_printk(KERN_ERR "Aieee - PCI parity error detected!\n");
+               dev_err(chip->card->dev,
+                       "Aieee - PCI parity error detected!\n");
                /* error 'handling' similar to aic7xxx_pci.c: */
                chip->pci_parity_errors++;
                if (chip->pci_parity_errors > 20) {
-                       snd_printk(KERN_ERR "Too many PCI parity errors observed.\n");
-                       snd_printk(KERN_ERR "Some device on this bus is generating bad parity.\n");
-                       snd_printk(KERN_ERR "This is an error *observed by*, not *generated by*, this card.\n");
-                       snd_printk(KERN_ERR "PCI parity error checking has been disabled.\n");
+                       dev_err(chip->card->dev,
+                               "Too many PCI parity errors observed.\n");
+                       dev_err(chip->card->dev,
+                               "Some device on this bus is generating bad parity.\n");
+                       dev_err(chip->card->dev,
+                               "This is an error *observed by*, not *generated by*, this card.\n");
+                       dev_err(chip->card->dev,
+                               "PCI parity error checking has been disabled.\n");
                        chip->interrupt_mask &= ~(INT_PPERR | INT_RIPERR);
                        snd_bt87x_writel(chip, REG_INT_MASK, chip->interrupt_mask);
                }
@@ -323,9 +329,11 @@ static irqreturn_t snd_bt87x_interrupt(int irq, void *dev_id)
 
        if (irq_status & ERROR_INTERRUPTS) {
                if (irq_status & (INT_FBUS | INT_FTRGT))
-                       snd_printk(KERN_WARNING "FIFO overrun, status %#08x\n", status);
+                       dev_warn(chip->card->dev,
+                                "FIFO overrun, status %#08x\n", status);
                if (irq_status & INT_OCERR)
-                       snd_printk(KERN_ERR "internal RISC error, status %#08x\n", status);
+                       dev_err(chip->card->dev,
+                               "internal RISC error, status %#08x\n", status);
                if (irq_status & (INT_PPERR | INT_RIPERR | INT_PABORT))
                        snd_bt87x_pci_error(chip, irq_status);
        }
@@ -747,7 +755,7 @@ static int snd_bt87x_create(struct snd_card *card,
        }
        chip->mmio = pci_ioremap_bar(pci, 0);
        if (!chip->mmio) {
-               snd_printk(KERN_ERR "cannot remap io memory\n");
+               dev_err(card->dev, "cannot remap io memory\n");
                err = -ENOMEM;
                goto fail;
        }
@@ -762,7 +770,7 @@ static int snd_bt87x_create(struct snd_card *card,
        err = request_irq(pci->irq, snd_bt87x_interrupt, IRQF_SHARED,
                          KBUILD_MODNAME, chip);
        if (err < 0) {
-               snd_printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
+               dev_err(card->dev, "cannot grab irq %d\n", pci->irq);
                goto fail;
        }
        chip->irq = pci->irq;
@@ -850,14 +858,15 @@ static int snd_bt87x_detect_card(struct pci_dev *pci)
        for (i = 0; i < ARRAY_SIZE(blacklist); ++i)
                if (blacklist[i].subvendor == pci->subsystem_vendor &&
                    blacklist[i].subdevice == pci->subsystem_device) {
-                       snd_printdd(KERN_INFO "card %#04x-%#04x:%#04x has no audio\n",
+                       dev_dbg(&pci->dev,
+                               "card %#04x-%#04x:%#04x has no audio\n",
                                    pci->device, pci->subsystem_vendor, pci->subsystem_device);
                        return -EBUSY;
                }
 
-       snd_printk(KERN_INFO "unknown card %#04x-%#04x:%#04x\n",
+       dev_info(&pci->dev, "unknown card %#04x-%#04x:%#04x\n",
                   pci->device, pci->subsystem_vendor, pci->subsystem_device);
-       snd_printk(KERN_DEBUG "please mail id, board name, and, "
+       dev_info(&pci->dev, "please mail id, board name, and, "
                   "if it works, the correct digital_rate option to "
                   "<alsa-devel@alsa-project.org>\n");
        return SND_BT87X_BOARD_UNKNOWN;
@@ -925,7 +934,7 @@ static int snd_bt87x_probe(struct pci_dev *pci,
                if (err < 0)
                        goto _error;
        }
-       snd_printk(KERN_INFO "bt87x%d: Using board %d, %sanalog, %sdigital "
+       dev_info(card->dev, "bt87x%d: Using board %d, %sanalog, %sdigital "
                   "(rate %d Hz)\n", dev, boardid,
                   chip->board.no_analog ? "no " : "",
                   chip->board.no_digital ? "no " : "", chip->board.dig_rate);