arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
authorChanwoo Choi <cw00.choi@samsung.com>
Thu, 3 Nov 2016 06:39:08 +0000 (15:39 +0900)
committerKrzysztof Kozlowski <krzk@kernel.org>
Thu, 3 Nov 2016 20:19:31 +0000 (22:19 +0200)
This patch adds the Device Tree source for Exynos5433-based Samsung TM2
board.

This patch adds support for following devices:
1. basic SoC
- Initial booting for Samsung Exynos5433 SoC
- DRAM LPDDR3 (3GB)
- eMMC (32GB)
- ARM architecture timer

2. power management devices
- Sasmung S2MPS13 PMIC for the power supply
- CPUFREQ for big.LITTLE cores
- TMU for big.LITTLE cores and GPU
- ADC with thermistor to measure the temperature of AP/Battery/Charger
- Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)

3. sound devices
- I2S for sound bus
- LPASS for sound power control
- Wolfson WM5110 for sound codec
- Maxim MAX98504 for speaker amplifier
- TM2 ASoC Machine device driver node

3. display devices
- DECON, DSI and MIC for the panel output

4. USB devices
- USB 3.0 DRD (Dual Role Device)
- USB 3.0 Host controller

5. storage devices
- MSHC (Mobile Storage Host Controller) for eMMC device

6. misc devices
- gpio-keys (power, volume up/down, home key)
- PWM (Pulse Width Modulation Timer)

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
arch/arm64/boot/dts/exynos/Makefile
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts [new file with mode: 0644]

index 0ea7f14ef2949d0419faa021d7173515131f8c8c..339af8b9cdc550356a8db79246cd530570f4313a 100644 (file)
@@ -15,6 +15,7 @@ Required root node properties:
        - "samsung,xyref5260"   - for Exynos5260-based Samsung board.
        - "samsung,smdk5410"    - for Exynos5410-based Samsung SMDK5410 eval board.
        - "samsung,smdk5420"    - for Exynos5420-based Samsung SMDK5420 eval board.
+       - "samsung,tm2"         - for Exynos5433-based Samsung TM2 board.
        - "samsung,sd5v1"       - for Exynos5440-based Samsung board.
        - "samsung,ssdk5440"    - for Exynos5440-based Samsung board.
 
index 50c9b9383cfa6121e28f6006769983b1f33e0268..947c750acba116b8950a10c042e247fbff5dcc95 100644 (file)
@@ -1,4 +1,6 @@
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += \
+       exynos5433-tm2.dtb      \
+       exynos7-espresso.dtb
 
 always         := $(dtb-y)
 subdir-y       := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
new file mode 100644 (file)
index 0000000..9ea3f32
--- /dev/null
@@ -0,0 +1,974 @@
+/*
+ * SAMSUNG Exynos5433 TM2 board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *
+ * Device tree source file for Samsung's TM2 board which is based on
+ * Samsung Exynos5433 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5433.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+       model = "Samsung TM2 board";
+       compatible = "samsung,tm2", "samsung,exynos5433";
+
+       aliases {
+               pinctrl0 = &pinctrl_alive;
+               pinctrl1 = &pinctrl_aud;
+               pinctrl2 = &pinctrl_cpif;
+               pinctrl3 = &pinctrl_ese;
+               pinctrl4 = &pinctrl_finger;
+               pinctrl5 = &pinctrl_fsys;
+               pinctrl6 = &pinctrl_imem;
+               pinctrl7 = &pinctrl_nfc;
+               pinctrl8 = &pinctrl_peric;
+               pinctrl9 = &pinctrl_touch;
+               serial0 = &serial_0;
+               serial1 = &serial_1;
+               serial2 = &serial_2;
+               serial3 = &serial_3;
+               spi0 = &spi_0;
+               spi1 = &spi_1;
+               spi2 = &spi_2;
+               spi3 = &spi_3;
+               spi4 = &spi_4;
+       };
+
+       chosen {
+               stdout-path = &serial_1;
+       };
+
+       memory@20000000 {
+               device_type = "memory";
+               reg = <0x0 0x20000000 0x0 0xc0000000>;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               power-key {
+                       gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_POWER>;
+                       label = "power key";
+                       debounce-interval = <10>;
+               };
+
+               volume-up-key {
+                       gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEUP>;
+                       label = "volume-up key";
+                       debounce-interval = <10>;
+               };
+
+               volume-down-key {
+                       gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_VOLUMEDOWN>;
+                       label = "volume-down key";
+                       debounce-interval = <10>;
+               };
+
+               homepage-key {
+                       gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_MENU>;
+                       label = "homepage key";
+                       debounce-interval = <10>;
+               };
+       };
+
+       i2c_max98504: i2c-gpio-0 {
+               compatible = "i2c-gpio";
+               gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
+                        &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
+               i2c-gpio,delay-us = <2>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               status = "okay";
+
+               max98504: max98504@31 {
+                       compatible = "maxim,max98504";
+                       reg = <0x31>;
+                       maxim,rx-path = <1>;
+                       maxim,tx-path = <1>;
+                       maxim,tx-channel-mask = <3>;
+                       maxim,tx-channel-source = <2>;
+               };
+       };
+
+       sound {
+               compatible = "samsung,tm2-audio";
+               audio-codec = <&wm5110>;
+               i2s-controller = <&i2s0>;
+               audio-amplifier = <&max98504>;
+               mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
+               model = "wm5110";
+               samsung,audio-routing =
+                       /* Headphone */
+                       "HP", "HPOUT1L",
+                       "HP", "HPOUT1R",
+
+                       /* Speaker */
+                       "SPK", "SPKOUT",
+                       "SPKOUT", "HPOUT2L",
+                       "SPKOUT", "HPOUT2R",
+
+                       /* Receiver */
+                       "RCV", "HPOUT3L",
+                       "RCV", "HPOUT3R";
+               status = "okay";
+       };
+};
+
+&adc {
+       vdd-supply = <&ldo3_reg>;
+       status = "okay";
+
+       thermistor-ap {
+               compatible = "murata,ncp03wf104";
+               pullup-uv = <1800000>;
+               pullup-ohm = <100000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 0>;
+       };
+
+       thermistor-battery {
+               compatible = "murata,ncp03wf104";
+               pullup-uv = <1800000>;
+               pullup-ohm = <100000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 1>;
+               #thermal-sensor-cells = <0>;
+       };
+
+       thermistor-charger {
+               compatible = "murata,ncp03wf104";
+               pullup-uv = <1800000>;
+               pullup-ohm = <100000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 2>;
+       };
+};
+
+&cpu0 {
+       cpu-supply = <&buck3_reg>;
+};
+
+&cpu4 {
+       cpu-supply = <&buck2_reg>;
+};
+
+&decon {
+       status = "okay";
+
+       i80-if-timings {
+       };
+};
+
+&dsi {
+       status = "okay";
+       vddcore-supply = <&ldo6_reg>;
+       vddio-supply = <&ldo7_reg>;
+       samsung,pll-clock-frequency = <24000000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&te_irq>;
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@1 {
+                       reg = <1>;
+
+                       dsi_out: endpoint {
+                               samsung,burst-clock-frequency = <512000000>;
+                               samsung,esc-clock-frequency = <16000000>;
+                       };
+               };
+       };
+};
+
+&hsi2c_0 {
+       status = "okay";
+       clock-frequency = <2500000>;
+
+       s2mps13-pmic@66 {
+               compatible = "samsung,s2mps13-pmic";
+               interrupt-parent = <&gpa0>;
+               interrupts = <7 IRQ_TYPE_NONE>;
+               reg = <0x66>;
+               samsung,s2mps11-wrstbi-ground;
+
+               s2mps13_osc: clocks {
+                       compatible = "samsung,s2mps13-clk";
+                       #clock-cells = <1>;
+                       clock-output-names = "s2mps13_ap", "s2mps13_cp",
+                               "s2mps13_bt";
+               };
+
+               regulators {
+                       ldo1_reg: LDO1 {
+                               regulator-name = "VDD_ALIVE_0.9V_AP";
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <900000>;
+                               regulator-always-on;
+                       };
+
+                       ldo2_reg: LDO2 {
+                               regulator-name = "VDDQ_MMC2_2.8V_AP";
+                               regulator-min-microvolt = <2800000>;
+                               regulator-max-microvolt = <2800000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo3_reg: LDO3 {
+                               regulator-name = "VDD1_E_1.8V_AP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-always-on;
+                       };
+
+                       ldo4_reg: LDO4 {
+                               regulator-name = "VDD10_MIF_PLL_1.0V_AP";
+                               regulator-min-microvolt = <1300000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo5_reg: LDO5 {
+                               regulator-name = "VDD10_DPLL_1.0V_AP";
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <1000000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo6_reg: LDO6 {
+                               regulator-name = "VDD10_MIPI2L_1.0V_AP";
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <1000000>;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo7_reg: LDO7 {
+                               regulator-name = "VDD18_MIPI2L_1.8V_AP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo8_reg: LDO8 {
+                               regulator-name = "VDD18_LLI_1.8V_AP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo9_reg: LDO9 {
+                               regulator-name = "VDD18_ABB_ETC_1.8V_AP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo10_reg: LDO10 {
+                               regulator-name = "VDD33_USB30_3.0V_AP";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo11_reg: LDO11 {
+                               regulator-name = "VDD_INT_M_1.0V_AP";
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <1000000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo12_reg: LDO12 {
+                               regulator-name = "VDD_KFC_M_1.1V_AP";
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-always-on;
+                       };
+
+                       ldo13_reg: LDO13 {
+                               regulator-name = "VDD_G3D_M_0.95V_AP";
+                               regulator-min-microvolt = <950000>;
+                               regulator-max-microvolt = <950000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo14_reg: LDO14 {
+                               regulator-name = "VDDQ_M1_LDO_1.2V_AP";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <1200000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo15_reg: LDO15 {
+                               regulator-name = "VDDQ_M2_LDO_1.2V_AP";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <1200000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       ldo16_reg: LDO16 {
+                               regulator-name = "VDDQ_EFUSE";
+                               regulator-min-microvolt = <1400000>;
+                               regulator-max-microvolt = <3400000>;
+                               regulator-always-on;
+                       };
+
+                       ldo17_reg: LDO17 {
+                               regulator-name = "V_TFLASH_2.8V_AP";
+                               regulator-min-microvolt = <2800000>;
+                               regulator-max-microvolt = <2800000>;
+                       };
+
+                       ldo18_reg: LDO18 {
+                               regulator-name = "V_CODEC_1.8V_AP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo19_reg: LDO19 {
+                               regulator-name = "VDDA_1.8V_COMP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-always-on;
+                       };
+
+                       ldo20_reg: LDO20 {
+                               regulator-name = "VCC_2.8V_AP";
+                               regulator-min-microvolt = <2800000>;
+                               regulator-max-microvolt = <2800000>;
+                               regulator-always-on;
+                       };
+
+                       ldo21_reg: LDO21 {
+                               regulator-name = "VT_CAM_1.8V";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo22_reg: LDO22 {
+                               regulator-name = "CAM_IO_1.8V_AP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo23_reg: LDO23 {
+                               regulator-name = "CAM_SEN_CORE_1.2V_AP";
+                               regulator-min-microvolt = <1050000>;
+                               regulator-max-microvolt = <1200000>;
+                       };
+
+                       ldo24_reg: LDO24 {
+                               regulator-name = "VT_CAM_1.2V";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <1200000>;
+                       };
+
+                       ldo25_reg: LDO25 {
+                               regulator-name = "CAM_SEN_A2.8V_AP";
+                               regulator-min-microvolt = <2800000>;
+                               regulator-max-microvolt = <2800000>;
+                       };
+
+                       ldo26_reg: LDO26 {
+                               regulator-name = "CAM_AF_2.8V_AP";
+                               regulator-min-microvolt = <2800000>;
+                               regulator-max-microvolt = <2800000>;
+                       };
+
+                       ldo27_reg: LDO27 {
+                               regulator-name = "VCC_3.0V_LCD_AP";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                       };
+
+                       ldo28_reg: LDO28 {
+                               regulator-name = "VCC_1.8V_LCD_AP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo29_reg: LDO29 {
+                               regulator-name = "VT_CAM_2.8V";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                       };
+
+                       ldo30_reg: LDO30 {
+                               regulator-name = "TSP_AVDD_3.3V_AP";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       ldo31_reg: LDO31 {
+                               regulator-name = "TSP_VDD_1.85V_AP";
+                               regulator-min-microvolt = <1850000>;
+                               regulator-max-microvolt = <1850000>;
+                       };
+
+                       ldo32_reg: LDO32 {
+                               regulator-name = "VTOUCH_1.8V_AP";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo33_reg: LDO33 {
+                               regulator-name = "VTOUCH_LED_3.3V";
+                               regulator-min-microvolt = <2500000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-ramp-delay = <12500>;
+                       };
+
+                       ldo34_reg: LDO34 {
+                               regulator-name = "VCC_1.8V_MHL_AP";
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <2100000>;
+                       };
+
+                       ldo35_reg: LDO35 {
+                               regulator-name = "OIS_VM_2.8V";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <2800000>;
+                       };
+
+                       ldo36_reg: LDO36 {
+                               regulator-name = "VSIL_1.0V";
+                               regulator-min-microvolt = <1000000>;
+                               regulator-max-microvolt = <1000000>;
+                       };
+
+                       ldo37_reg: LDO37 {
+                               regulator-name = "VF_1.8V";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo38_reg: LDO38 {
+                               regulator-name = "VCC_3.0V_MOTOR_AP";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3000000>;
+                       };
+
+                       ldo39_reg: LDO39 {
+                               regulator-name = "V_HRM_1.8V";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <1800000>;
+                       };
+
+                       ldo40_reg: LDO40 {
+                               regulator-name = "V_HRM_3.3V";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <3300000>;
+                       };
+
+                       buck1_reg: BUCK1 {
+                               regulator-name = "VDD_MIF_0.9V_AP";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       buck2_reg: BUCK2 {
+                               regulator-name = "VDD_EGL_1.0V_AP";
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       buck3_reg: BUCK3 {
+                               regulator-name = "VDD_KFC_1.0V_AP";
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1200000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       buck4_reg: BUCK4 {
+                               regulator-name = "VDD_INT_0.95V_AP";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       buck5_reg: BUCK5 {
+                               regulator-name = "VDD_DISP_CAM0_0.9V_AP";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       buck6_reg: BUCK6 {
+                               regulator-name = "VDD_G3D_0.9V_AP";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-always-on;
+                               regulator-state-mem {
+                                       regulator-off-in-suspend;
+                               };
+                       };
+
+                       buck7_reg: BUCK7 {
+                               regulator-name = "VDD_MEM1_1.2V_AP";
+                               regulator-min-microvolt = <1200000>;
+                               regulator-max-microvolt = <1200000>;
+                               regulator-always-on;
+                       };
+
+                       buck8_reg: BUCK8 {
+                               regulator-name = "VDD_LLDO_1.35V_AP";
+                               regulator-min-microvolt = <1350000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       buck9_reg: BUCK9 {
+                               regulator-name = "VDD_MLDO_2.0V_AP";
+                               regulator-min-microvolt = <1350000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-always-on;
+                       };
+
+                       buck10_reg: BUCK10 {
+                               regulator-name = "vdd_mem2";
+                               regulator-min-microvolt = <550000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-always-on;
+                       };
+               };
+       };
+};
+
+&hsi2c_8 {
+       status = "okay";
+
+       max77843@66 {
+               compatible = "maxim,max77843";
+               interrupt-parent = <&gpa1>;
+               interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+               reg = <0x66>;
+
+               muic: max77843-muic {
+                       compatible = "maxim,max77843-muic";
+               };
+
+               regulators {
+                       compatible = "maxim,max77843-regulator";
+                       safeout1_reg: SAFEOUT1 {
+                               regulator-name = "SAFEOUT1";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <4950000>;
+                       };
+
+                       safeout2_reg: SAFEOUT2 {
+                               regulator-name = "SAFEOUT2";
+                               regulator-min-microvolt = <3300000>;
+                               regulator-max-microvolt = <4950000>;
+                       };
+
+                       charger_reg: CHARGER {
+                               regulator-name = "CHARGER";
+                               regulator-min-microamp = <100000>;
+                               regulator-max-microamp = <3150000>;
+                       };
+               };
+
+               haptic: max77843-haptic {
+                       compatible = "maxim,max77843-haptic";
+                       haptic-supply = <&ldo38_reg>;
+                       pwms = <&pwm 0 33670 0>;
+                       pwm-names = "haptic";
+               };
+       };
+};
+
+&i2s0 {
+       status = "okay";
+};
+
+&mshc_0 {
+       status = "okay";
+       num-slots = <1>;
+       non-removable;
+       card-detect-delay = <200>;
+       samsung,dw-mshc-ciu-div = <3>;
+       samsung,dw-mshc-sdr-timing = <0 4>;
+       samsung,dw-mshc-ddr-timing = <0 2>;
+       samsung,dw-mshc-hs400-timing = <0 3>;
+       samsung,read-strobe-delay = <90>;
+       fifo-depth = <0x80>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
+                       &sd0_bus8 &sd0_rdqs>;
+       bus-width = <8>;
+       assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
+       assigned-clock-rates = <800000000>;
+};
+
+&pinctrl_alive {
+       pinctrl-names = "default";
+       pinctrl-0 = <&initial_alive>;
+
+       initial_alive: initial-state {
+               PIN(IN, gpa0-0, DOWN, LV1);
+               PIN(IN, gpa0-1, NONE, LV1);
+               PIN(IN, gpa0-2, DOWN, LV1);
+               PIN(IN, gpa0-3, NONE, LV1);
+               PIN(IN, gpa0-4, NONE, LV1);
+               PIN(IN, gpa0-5, DOWN, LV1);
+               PIN(IN, gpa0-6, NONE, LV1);
+               PIN(IN, gpa0-7, NONE, LV1);
+
+               PIN(IN, gpa1-0, UP, LV1);
+               PIN(IN, gpa1-1, NONE, LV1);
+               PIN(IN, gpa1-2, NONE, LV1);
+               PIN(IN, gpa1-3, DOWN, LV1);
+               PIN(IN, gpa1-4, DOWN, LV1);
+               PIN(IN, gpa1-5, NONE, LV1);
+               PIN(IN, gpa1-6, NONE, LV1);
+               PIN(IN, gpa1-7, NONE, LV1);
+
+               PIN(IN, gpa2-0, NONE, LV1);
+               PIN(IN, gpa2-1, NONE, LV1);
+               PIN(IN, gpa2-2, NONE, LV1);
+               PIN(IN, gpa2-3, DOWN, LV1);
+               PIN(IN, gpa2-4, NONE, LV1);
+               PIN(IN, gpa2-5, DOWN, LV1);
+               PIN(IN, gpa2-6, DOWN, LV1);
+               PIN(IN, gpa2-7, NONE, LV1);
+
+               PIN(IN, gpa3-0, DOWN, LV1);
+               PIN(IN, gpa3-1, DOWN, LV1);
+               PIN(IN, gpa3-2, NONE, LV1);
+               PIN(IN, gpa3-3, DOWN, LV1);
+               PIN(IN, gpa3-4, NONE, LV1);
+               PIN(IN, gpa3-5, DOWN, LV1);
+               PIN(IN, gpa3-6, DOWN, LV1);
+               PIN(IN, gpa3-7, DOWN, LV1);
+
+               PIN(IN, gpf1-0, NONE, LV1);
+               PIN(IN, gpf1-1, NONE, LV1);
+               PIN(IN, gpf1-2, DOWN, LV1);
+               PIN(IN, gpf1-4, UP, LV1);
+               PIN(OUT, gpf1-5, NONE, LV1);
+               PIN(IN, gpf1-6, DOWN, LV1);
+               PIN(IN, gpf1-7, DOWN, LV1);
+
+               PIN(IN, gpf2-0, DOWN, LV1);
+               PIN(IN, gpf2-1, DOWN, LV1);
+               PIN(IN, gpf2-2, DOWN, LV1);
+               PIN(IN, gpf2-3, DOWN, LV1);
+
+               PIN(IN, gpf3-0, DOWN, LV1);
+               PIN(IN, gpf3-1, DOWN, LV1);
+               PIN(IN, gpf3-2, NONE, LV1);
+               PIN(IN, gpf3-3, DOWN, LV1);
+
+               PIN(IN, gpf4-0, DOWN, LV1);
+               PIN(IN, gpf4-1, DOWN, LV1);
+               PIN(IN, gpf4-2, DOWN, LV1);
+               PIN(IN, gpf4-3, DOWN, LV1);
+               PIN(IN, gpf4-4, DOWN, LV1);
+               PIN(IN, gpf4-5, DOWN, LV1);
+               PIN(IN, gpf4-6, DOWN, LV1);
+               PIN(IN, gpf4-7, DOWN, LV1);
+
+               PIN(IN, gpf5-0, DOWN, LV1);
+               PIN(IN, gpf5-1, DOWN, LV1);
+               PIN(IN, gpf5-2, DOWN, LV1);
+               PIN(IN, gpf5-3, DOWN, LV1);
+               PIN(OUT, gpf5-4, NONE, LV1);
+               PIN(IN, gpf5-5, DOWN, LV1);
+               PIN(IN, gpf5-6, DOWN, LV1);
+               PIN(IN, gpf5-7, DOWN, LV1);
+       };
+
+       te_irq: te_irq {
+               samsung,pins = "gpf1-3";
+               samsung,pin-function = <0xf>;
+       };
+};
+
+&pinctrl_cpif {
+       pinctrl-names = "default";
+       pinctrl-0 = <&initial_cpif>;
+
+       initial_cpif: initial-state {
+               PIN(IN, gpv6-0, DOWN, LV1);
+               PIN(IN, gpv6-1, DOWN, LV1);
+       };
+};
+
+&pinctrl_ese {
+       pinctrl-names = "default";
+       pinctrl-0 = <&initial_ese>;
+
+       initial_ese: initial-state {
+               PIN(IN, gpj2-0, DOWN, LV1);
+               PIN(IN, gpj2-1, DOWN, LV1);
+               PIN(IN, gpj2-2, DOWN, LV1);
+       };
+};
+
+&pinctrl_fsys {
+       pinctrl-names = "default";
+       pinctrl-0 = <&initial_fsys>;
+
+       initial_fsys: initial-state {
+               PIN(IN, gpr3-0, NONE, LV1);
+               PIN(IN, gpr3-1, DOWN, LV1);
+               PIN(IN, gpr3-2, DOWN, LV1);
+               PIN(IN, gpr3-3, DOWN, LV1);
+               PIN(IN, gpr3-7, NONE, LV1);
+       };
+};
+
+&pinctrl_imem {
+       pinctrl-names = "default";
+       pinctrl-0 = <&initial_imem>;
+
+       initial_imem: initial-state {
+               PIN(IN, gpf0-0, UP, LV1);
+               PIN(IN, gpf0-1, UP, LV1);
+               PIN(IN, gpf0-2, DOWN, LV1);
+               PIN(IN, gpf0-3, UP, LV1);
+               PIN(IN, gpf0-4, DOWN, LV1);
+               PIN(IN, gpf0-5, NONE, LV1);
+               PIN(IN, gpf0-6, DOWN, LV1);
+               PIN(IN, gpf0-7, UP, LV1);
+       };
+};
+
+&pinctrl_nfc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&initial_nfc>;
+
+       initial_nfc: initial-state {
+               PIN(IN, gpj0-2, DOWN, LV1);
+       };
+};
+
+&pinctrl_peric {
+       pinctrl-names = "default";
+       pinctrl-0 = <&initial_peric>;
+
+       initial_peric: initial-state {
+               PIN(IN, gpv7-0, DOWN, LV1);
+               PIN(IN, gpv7-1, DOWN, LV1);
+               PIN(IN, gpv7-2, NONE, LV1);
+               PIN(IN, gpv7-3, DOWN, LV1);
+               PIN(IN, gpv7-4, DOWN, LV1);
+               PIN(IN, gpv7-5, DOWN, LV1);
+
+               PIN(IN, gpb0-4, DOWN, LV1);
+
+               PIN(IN, gpc0-2, DOWN, LV1);
+               PIN(IN, gpc0-5, DOWN, LV1);
+               PIN(IN, gpc0-7, DOWN, LV1);
+
+               PIN(IN, gpc1-1, DOWN, LV1);
+
+               PIN(IN, gpc3-4, NONE, LV1);
+               PIN(IN, gpc3-5, NONE, LV1);
+               PIN(IN, gpc3-6, NONE, LV1);
+               PIN(IN, gpc3-7, NONE, LV1);
+
+               PIN(OUT, gpg0-0, NONE, LV1);
+               PIN(FUNC1, gpg0-1, DOWN, LV1);
+
+               PIN(IN, gpd2-5, DOWN, LV1);
+
+               PIN(IN, gpd4-0, NONE, LV1);
+               PIN(IN, gpd4-1, DOWN, LV1);
+               PIN(IN, gpd4-2, DOWN, LV1);
+               PIN(IN, gpd4-3, DOWN, LV1);
+               PIN(IN, gpd4-4, DOWN, LV1);
+
+               PIN(IN, gpd6-3, DOWN, LV1);
+
+               PIN(IN, gpd8-1, UP, LV1);
+
+               PIN(IN, gpg1-0, DOWN, LV1);
+               PIN(IN, gpg1-1, DOWN, LV1);
+               PIN(IN, gpg1-2, DOWN, LV1);
+               PIN(IN, gpg1-3, DOWN, LV1);
+               PIN(IN, gpg1-4, DOWN, LV1);
+
+               PIN(IN, gpg2-0, DOWN, LV1);
+               PIN(IN, gpg2-1, DOWN, LV1);
+
+               PIN(IN, gpg3-0, DOWN, LV1);
+               PIN(IN, gpg3-1, DOWN, LV1);
+               PIN(IN, gpg3-5, DOWN, LV1);
+               PIN(IN, gpg3-7, DOWN, LV1);
+       };
+};
+
+&pinctrl_touch {
+       pinctrl-names = "default";
+       pinctrl-0 = <&initial_touch>;
+
+       initial_touch: initial-state {
+               PIN(IN, gpj1-2, DOWN, LV1);
+       };
+};
+
+&pwm {
+       pinctrl-0 = <&pwm0_out>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&mic {
+       status = "okay";
+
+       i80-if-timings {
+       };
+};
+
+&serial_1 {
+       status = "okay";
+};
+
+&serial_3 {
+       assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
+       assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
+       status = "okay";
+};
+
+&spi_1 {
+       cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+
+       wm5110: wm5110-codec@0 {
+               compatible = "wlf,wm5110";
+               reg = <0x0>;
+               spi-max-frequency = <20000000>;
+               interrupt-parent = <&gpa0>;
+               interrupts = <4 IRQ_TYPE_NONE>;
+               clocks = <&pmu_system_controller 0>,
+                       <&s2mps13_osc S2MPS11_CLK_BT>;
+               clock-names = "mclk1", "mclk2";
+
+               gpio-controller;
+               #gpio-cells = <2>;
+
+               wlf,micd-detect-debounce = <300>;
+               wlf,micd-bias-start-time = <0x1>;
+               wlf,micd-rate = <0x7>;
+               wlf,micd-dbtime = <0x1>;
+               wlf,micd-force-micbias;
+               wlf,micd-configs = <0x0 1 0>;
+               wlf,hpdet-channel = <1>;
+               wlf,gpsw = <0x1>;
+               wlf,inmode = <2 0 2 0>;
+
+               wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
+               wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
+
+               /* core supplies */
+               AVDD-supply = <&ldo18_reg>;
+               DBVDD1-supply = <&ldo18_reg>;
+               CPVDD-supply = <&ldo18_reg>;
+               DBVDD2-supply = <&ldo18_reg>;
+               DBVDD3-supply = <&ldo18_reg>;
+
+               controller-data {
+                       samsung,spi-feedback-delay = <0>;
+               };
+       };
+};
+
+&timer {
+       clock-frequency = <24000000>;
+};
+
+&tmu_atlas0 {
+       vtmu-supply = <&ldo3_reg>;
+       status = "okay";
+};
+
+&tmu_apollo {
+       vtmu-supply = <&ldo3_reg>;
+       status = "okay";
+};
+
+&tmu_g3d {
+       vtmu-supply = <&ldo3_reg>;
+       status = "okay";
+};
+
+&usbdrd30 {
+       vdd33-supply = <&ldo10_reg>;
+       vdd10-supply = <&ldo6_reg>;
+       status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+       dr_mode = "otg";
+};
+
+&usbdrd30_phy {
+       vbus-supply = <&safeout1_reg>;
+       status = "okay";
+};
+
+&xxti {
+       clock-frequency = <24000000>;
+};