#include <linux/slab.h>
#include <linux/input.h>
+#include <linux/input/mt.h>
#include <linux/serio.h>
#include <linux/libps2.h>
/*
* Definitions for ALPS version 3 and 4 command mode protocol
*/
+#define ALPS_V3_X_MAX 2000
+#define ALPS_V3_Y_MAX 1400
+
+#define ALPS_BITMAP_X_BITS 15
+#define ALPS_BITMAP_Y_BITS 11
+
#define ALPS_CMD_NIBBLE_10 0x01f2
static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
input_sync(dev);
}
+/*
+ * Process bitmap data from v3 and v4 protocols. Returns the number of
+ * fingers detected. A return value of 0 means at least one of the
+ * bitmaps was empty.
+ *
+ * The bitmaps don't have enough data to track fingers, so this function
+ * only generates points representing a bounding box of all contacts.
+ * These points are returned in x1, y1, x2, and y2 when the return value
+ * is greater than 0.
+ */
+static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
+ int *x1, int *y1, int *x2, int *y2)
+{
+ struct alps_bitmap_point {
+ int start_bit;
+ int num_bits;
+ };
+
+ int fingers_x = 0, fingers_y = 0, fingers;
+ int i, bit, prev_bit;
+ struct alps_bitmap_point x_low = {0,}, x_high = {0,};
+ struct alps_bitmap_point y_low = {0,}, y_high = {0,};
+ struct alps_bitmap_point *point;
+
+ if (!x_map || !y_map)
+ return 0;
+
+ *x1 = *y1 = *x2 = *y2 = 0;
+
+ prev_bit = 0;
+ point = &x_low;
+ for (i = 0; x_map != 0; i++, x_map >>= 1) {
+ bit = x_map & 1;
+ if (bit) {
+ if (!prev_bit) {
+ point->start_bit = i;
+ fingers_x++;
+ }
+ point->num_bits++;
+ } else {
+ if (prev_bit)
+ point = &x_high;
+ else
+ point->num_bits = 0;
+ }
+ prev_bit = bit;
+ }
+
+ /*
+ * y bitmap is reversed for what we need (lower positions are in
+ * higher bits), so we process from the top end.
+ */
+ y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS);
+ prev_bit = 0;
+ point = &y_low;
+ for (i = 0; y_map != 0; i++, y_map <<= 1) {
+ bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1));
+ if (bit) {
+ if (!prev_bit) {
+ point->start_bit = i;
+ fingers_y++;
+ }
+ point->num_bits++;
+ } else {
+ if (prev_bit)
+ point = &y_high;
+ else
+ point->num_bits = 0;
+ }
+ prev_bit = bit;
+ }
+
+ /*
+ * Fingers can overlap, so we use the maximum count of fingers
+ * on either axis as the finger count.
+ */
+ fingers = max(fingers_x, fingers_y);
+
+ /*
+ * If total fingers is > 1 but either axis reports only a single
+ * contact, we have overlapping or adjacent fingers. For the
+ * purposes of creating a bounding box, divide the single contact
+ * (roughly) equally between the two points.
+ */
+ if (fingers > 1) {
+ if (fingers_x == 1) {
+ i = x_low.num_bits / 2;
+ x_low.num_bits = x_low.num_bits - i;
+ x_high.start_bit = x_low.start_bit + i;
+ x_high.num_bits = max(i, 1);
+ } else if (fingers_y == 1) {
+ i = y_low.num_bits / 2;
+ y_low.num_bits = y_low.num_bits - i;
+ y_high.start_bit = y_low.start_bit + i;
+ y_high.num_bits = max(i, 1);
+ }
+ }
+
+ *x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) /
+ (2 * (ALPS_BITMAP_X_BITS - 1));
+ *y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) /
+ (2 * (ALPS_BITMAP_Y_BITS - 1));
+
+ if (fingers > 1) {
+ *x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) /
+ (2 * (ALPS_BITMAP_X_BITS - 1));
+ *y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) /
+ (2 * (ALPS_BITMAP_Y_BITS - 1));
+ }
+
+ return fingers;
+}
+
+static void alps_set_slot(struct input_dev *dev, int slot, bool active,
+ int x, int y)
+{
+ input_mt_slot(dev, slot);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+ if (active) {
+ input_report_abs(dev, ABS_MT_POSITION_X, x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, y);
+ }
+}
+
+static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers,
+ int x1, int y1, int x2, int y2)
+{
+ alps_set_slot(dev, 0, num_fingers != 0, x1, y1);
+ alps_set_slot(dev, 1, num_fingers == 2, x2, y2);
+}
+
static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
struct input_dev *dev2 = priv->dev2;
int x, y, z;
int left, right, middle;
+ int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ int fingers = 0, bmap_fingers;
+ unsigned int x_bitmap, y_bitmap;
/*
- * There's no single feature of touchpad position and bitmap
- * packets that can be used to distinguish between them. We
- * rely on the fact that a bitmap packet should always follow
- * a position packet with bit 6 of packet[4] set.
+ * There's no single feature of touchpad position and bitmap packets
+ * that can be used to distinguish between them. We rely on the fact
+ * that a bitmap packet should always follow a position packet with
+ * bit 6 of packet[4] set.
*/
if (priv->multi_packet) {
- priv->multi_packet = 0;
-
/*
* Sometimes a position packet will indicate a multi-packet
* sequence, but then what follows is another position
* position packet as usual.
*/
if (packet[0] & 0x40) {
+ fingers = (packet[5] & 0x3) + 1;
+ x_bitmap = ((packet[4] & 0x7e) << 8) |
+ ((packet[1] & 0x7f) << 2) |
+ ((packet[0] & 0x30) >> 4);
+ y_bitmap = ((packet[3] & 0x70) << 4) |
+ ((packet[2] & 0x7f) << 1) |
+ (packet[4] & 0x01);
+
+ bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ &x1, &y1, &x2, &y2);
+
/*
- * Bitmap packets are not yet supported, so for now
- * just ignore them.
+ * We shouldn't report more than one finger if
+ * we don't have two coordinates.
*/
- return;
+ if (fingers > 1 && bmap_fingers < 2)
+ fingers = bmap_fingers;
+
+ /* Now process position packet */
+ packet = priv->multi_data;
+ } else {
+ priv->multi_packet = 0;
}
}
- if (!priv->multi_packet && (packet[4] & 0x40))
+ /*
+ * Bit 6 of byte 0 is not usually set in position packets. The only
+ * times it seems to be set is in situations where the data is
+ * suspect anyway, e.g. a palm resting flat on the touchpad. Given
+ * this combined with the fact that this bit is useful for filtering
+ * out misidentified bitmap packets, we reject anything with this
+ * bit set.
+ */
+ if (packet[0] & 0x40)
+ return;
+
+ if (!priv->multi_packet && (packet[4] & 0x40)) {
priv->multi_packet = 1;
- else
- priv->multi_packet = 0;
+ memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
+ return;
+ }
+
+ priv->multi_packet = 0;
left = packet[3] & 0x01;
right = packet[3] & 0x02;
if (x && y && !z)
return;
+ /*
+ * If we don't have MT data or the bitmaps were empty, we have
+ * to rely on ST data.
+ */
+ if (!fingers) {
+ x1 = x;
+ y1 = y;
+ fingers = z > 0 ? 1 : 0;
+ }
+
if (z >= 64)
input_report_key(dev, BTN_TOUCH, 1);
else
input_report_key(dev, BTN_TOUCH, 0);
+ alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+
+ input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+ input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+ input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+ input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
+
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev, BTN_MIDDLE, middle);
+
if (z > 0) {
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
}
input_report_abs(dev, ABS_PRESSURE, z);
- input_report_key(dev, BTN_TOOL_FINGER, z > 0);
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- input_report_key(dev, BTN_MIDDLE, middle);
-
input_sync(dev);
if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
break;
case ALPS_PROTO_V3:
+ set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
+ input_mt_init_slots(dev1, 2);
+ input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+
+ set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
+ set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
+ /* fall through */
case ALPS_PROTO_V4:
- input_set_abs_params(dev1, ABS_X, 0, 2000, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, 1400, 0, 0);
+ input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
break;
}
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff