mlxsw: reg: Add Policy-Engine TCAM Entry Register Version 2

The PTCE-V2 register is used for accessing rules within a TCAM region.
It is a new version of PTCE in order to support wider key, mask and
action within a TCAM region.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 444f0a309d3028fbd33e5a7e18931f170b63b25a..10082518cf971815051609974d377452a090869a 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -1957,6 +1957,105 @@ static inline void mlxsw_reg_ptar_unpack(char *payload, char *tcam_region_info)
        mlxsw_reg_ptar_tcam_region_info_memcpy_from(payload, tcam_region_info);
 }
 
+/* PTCE-V2 - Policy-Engine TCAM Entry Register Version 2
+ * -----------------------------------------------------
+ * This register is used for accessing rules within a TCAM region.
+ * It is a new version of PTCE in order to support wider key,
+ * mask and action within a TCAM region. This register is not supported
+ * by SwitchX and SwitchX-2.
+ */
+#define MLXSW_REG_PTCE2_ID 0x3017
+#define MLXSW_REG_PTCE2_LEN 0x1D8
+
+MLXSW_REG_DEFINE(ptce2, MLXSW_REG_PTCE2_ID, MLXSW_REG_PTCE2_LEN);
+
+/* reg_ptce2_v
+ * Valid.
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, ptce2, v, 0x00, 31, 1);
+
+/* reg_ptce2_a
+ * Activity. Set if a packet lookup has hit on the specific entry.
+ * To clear the "a" bit, use "clear activity" op or "clear on read" op.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptce2, a, 0x00, 30, 1);
+
+enum mlxsw_reg_ptce2_op {
+       /* Read operation. */
+       MLXSW_REG_PTCE2_OP_QUERY_READ = 0,
+       /* clear on read operation. Used to read entry
+        * and clear Activity bit.
+        */
+       MLXSW_REG_PTCE2_OP_QUERY_CLEAR_ON_READ = 1,
+       /* Write operation. Used to write a new entry to the table.
+        * All R/W fields are relevant for new entry. Activity bit is set
+        * for new entries - Note write with v = 0 will delete the entry.
+        */
+       MLXSW_REG_PTCE2_OP_WRITE_WRITE = 0,
+       /* Update action. Only action set will be updated. */
+       MLXSW_REG_PTCE2_OP_WRITE_UPDATE = 1,
+       /* Clear activity. A bit is cleared for the entry. */
+       MLXSW_REG_PTCE2_OP_WRITE_CLEAR_ACTIVITY = 2,
+};
+
+/* reg_ptce2_op
+ * Access: OP
+ */
+MLXSW_ITEM32(reg, ptce2, op, 0x00, 20, 3);
+
+/* reg_ptce2_offset
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, ptce2, offset, 0x00, 0, 16);
+
+/* reg_ptce2_tcam_region_info
+ * Opaque object that represents the TCAM region.
+ * Access: Index
+ */
+MLXSW_ITEM_BUF(reg, ptce2, tcam_region_info, 0x10,
+              MLXSW_REG_PXXX_TCAM_REGION_INFO_LEN);
+
+#define MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN 96
+
+/* reg_ptce2_flex_key_blocks
+ * ACL Key.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, ptce2, flex_key_blocks, 0x20,
+              MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN);
+
+/* reg_ptce2_mask
+ * mask- in the same size as key. A bit that is set directs the TCAM
+ * to compare the corresponding bit in key. A bit that is clear directs
+ * the TCAM to ignore the corresponding bit in key.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, ptce2, mask, 0x80,
+              MLXSW_REG_PTCE2_FLEX_KEY_BLOCKS_LEN);
+
+#define MLXSW_REG_PTCE2_FLEX_ACTION_SET_LEN 0xA8
+
+/* reg_ptce2_flex_action_set
+ * ACL action set.
+ * Access: RW
+ */
+MLXSW_ITEM_BUF(reg, ptce2, flex_action_set, 0xE0,
+              MLXSW_REG_PTCE2_FLEX_ACTION_SET_LEN);
+
+static inline void mlxsw_reg_ptce2_pack(char *payload, bool valid,
+                                       enum mlxsw_reg_ptce2_op op,
+                                       const char *tcam_region_info,
+                                       u16 offset)
+{
+       MLXSW_REG_ZERO(ptce2, payload);
+       mlxsw_reg_ptce2_v_set(payload, valid);
+       mlxsw_reg_ptce2_op_set(payload, op);
+       mlxsw_reg_ptce2_offset_set(payload, offset);
+       mlxsw_reg_ptce2_tcam_region_info_memcpy_to(payload, tcam_region_info);
+}
+
 /* QPCR - QoS Policer Configuration Register
  * -----------------------------------------
  * The QPCR register is used to create policers - that limit
@@ -5637,6 +5736,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
        MLXSW_REG(pacl),
        MLXSW_REG(pagt),
        MLXSW_REG(ptar),
+       MLXSW_REG(ptce2),
        MLXSW_REG(qpcr),
        MLXSW_REG(qtct),
        MLXSW_REG(qeec),