Rather than hardcoding CCA=0x5 for secondary cores, re-use the CCA from
the boot CPU. This allows overrides of the CCA using the cca= kernel
parameter to take effect on all CPUs for consistency.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
LEAF(mips_cps_core_entry)
/*
- * These first 8 bytes will be patched by cps_smp_setup to load the
- * base address of the CM GCRs into register v1.
+ * These first 12 bytes will be patched by cps_smp_setup to load the
+ * base address of the CM GCRs into register v1 and the CCA to use into
+ * register s0.
*/
.quad 0
+ .word 0
/* Check whether we're here due to an NMI */
mfc0 k0, CP0_STATUS
add a0, a0, t0
dcache_done:
- /* Set Kseg0 cacheable, coherent, write-back, write-allocate */
+ /* Set Kseg0 CCA to that in s0 */
mfc0 t0, CP0_CONFIG
ori t0, 0x7
- xori t0, 0x2
+ xori t0, 0x7
+ or t0, t0, s0
mtc0 t0, CP0_CONFIG
ehb
}
}
- /* Patch the start of mips_cps_core_entry to provide the CM base */
+ /*
+ * Patch the start of mips_cps_core_entry to provide:
+ *
+ * v0 = CM base address
+ * s0 = kseg0 CCA
+ */
entry_code = (u32 *)&mips_cps_core_entry;
UASM_i_LA(&entry_code, 3, (long)mips_cm_base);
+ uasm_i_addiu(&entry_code, 16, 0, cca);
dma_cache_wback_inv((unsigned long)&mips_cps_core_entry,
(void *)entry_code - (void *)&mips_cps_core_entry);