#define FW_NAME "3com/3C359.bin"
MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ;
-MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ;
+MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver\n") ;
MODULE_FIRMWARE(FW_NAME);
/* Module parameters */
u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
int i ;
- printk("tx_ring_head: %d, tx_ring_tail: %d, free_ent: %d \n",xl_priv->tx_ring_head,
+ printk("tx_ring_head: %d, tx_ring_tail: %d, free_ent: %d\n",xl_priv->tx_ring_head,
xl_priv->tx_ring_tail, xl_priv->free_ring_entries) ;
- printk("Ring , Address , FSH , DnNextPtr, Buffer, Buffer_Len \n");
+ printk("Ring , Address , FSH , DnNextPtr, Buffer, Buffer_Len\n");
for (i = 0; i < 16; i++) {
txd = &(xl_priv->xl_tx_ring[i]) ;
- printk("%d, %08lx, %08x, %08x, %08x, %08x \n", i, virt_to_bus(txd),
+ printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(txd),
txd->framestartheader, txd->dnnextptr, txd->buffer, txd->buffer_length ) ;
}
- printk("DNLISTPTR = %04x \n", readl(xl_mmio + MMIO_DNLISTPTR) );
+ printk("DNLISTPTR = %04x\n", readl(xl_mmio + MMIO_DNLISTPTR) );
- printk("DmaCtl = %04x \n", readl(xl_mmio + MMIO_DMA_CTRL) );
- printk("Queue status = %0x \n",netif_running(dev) ) ;
+ printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL) );
+ printk("Queue status = %0x\n",netif_running(dev) ) ;
}
static void print_rx_state(struct net_device *dev)
u8 __iomem *xl_mmio = xl_priv->xl_mmio ;
int i ;
- printk("rx_ring_tail: %d \n", xl_priv->rx_ring_tail) ;
- printk("Ring , Address , FrameState , UPNextPtr, FragAddr, Frag_Len \n");
+ printk("rx_ring_tail: %d\n", xl_priv->rx_ring_tail);
+ printk("Ring , Address , FrameState , UPNextPtr, FragAddr, Frag_Len\n");
for (i = 0; i < 16; i++) {
/* rxd = (struct xl_rx_desc *)xl_priv->rx_ring_dma_addr + (i * sizeof(struct xl_rx_desc)) ; */
rxd = &(xl_priv->xl_rx_ring[i]) ;
- printk("%d, %08lx, %08x, %08x, %08x, %08x \n", i, virt_to_bus(rxd),
+ printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(rxd),
rxd->framestatus, rxd->upnextptr, rxd->upfragaddr, rxd->upfraglen ) ;
}
- printk("UPLISTPTR = %04x \n", readl(xl_mmio + MMIO_UPLISTPTR) );
+ printk("UPLISTPTR = %04x\n", readl(xl_mmio + MMIO_UPLISTPTR));
- printk("DmaCtl = %04x \n", readl(xl_mmio + MMIO_DMA_CTRL) );
- printk("Queue status = %0x \n",netif_running(dev) ) ;
+ printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL));
+ printk("Queue status = %0x\n",netif_running(dev));
}
#endif
struct xl_private *xl_priv = netdev_priv(dev);
int err;
- printk(KERN_INFO "%s \n", version);
+ printk(KERN_INFO "%s\n", version);
printk(KERN_INFO "%s: I/O at %hx, MMIO at %p, using irq %d\n",
xl_priv->xl_card_name, (unsigned int)dev->base_addr ,xl_priv->xl_mmio, dev->irq);
writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD);
#if XL_DEBUG
- printk(KERN_INFO "Read from PMBAR = %04x \n", readw(xl_mmio + MMIO_MACDATA)) ;
+ printk(KERN_INFO "Read from PMBAR = %04x\n", readw(xl_mmio + MMIO_MACDATA));
#endif
if ( readw( (xl_mmio + MMIO_MACDATA)) & PMB_CPHOLD ) {
#if XL_DEBUG
writel(IO_WORD_READ | SWITCHSETTINGS, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
if ( readw(xl_mmio + MMIO_MACDATA) & 2) {
- printk(KERN_INFO "Default ring speed 4 mbps \n") ;
+ printk(KERN_INFO "Default ring speed 4 mbps\n");
} else {
- printk(KERN_INFO "Default ring speed 16 mbps \n") ;
+ printk(KERN_INFO "Default ring speed 16 mbps\n");
}
printk(KERN_INFO "%s: xl_priv->srb = %04x\n",xl_priv->xl_card_name, xl_priv->srb);
#endif
if (open_err != 0) { /* Something went wrong with the open command */
if (open_err & 0x07) { /* Wrong speed, retry at different speed */
- printk(KERN_WARNING "%s: Open Error, retrying at different ringspeed \n", dev->name) ;
+ printk(KERN_WARNING "%s: Open Error, retrying at different ringspeed\n", dev->name);
switchsettings = switchsettings ^ 2 ;
xl_ee_write(dev,0x08,switchsettings) ;
xl_hw_reset(dev) ;
}
if (i==0) {
- printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled \n",dev->name) ;
+ printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name);
free_irq(dev->irq,dev) ;
kfree(xl_priv->xl_tx_ring);
kfree(xl_priv->xl_rx_ring);
writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 12, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
xl_priv->arb = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
- printk(", ARB: %04x \n",xl_priv->arb ) ;
+ printk(", ARB: %04x\n",xl_priv->arb );
writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 14, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
vsoff = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
ver_str[i] = readb(xl_mmio + MMIO_MACDATA) ;
}
ver_str[i] = '\0' ;
- printk(KERN_INFO "%s: Microcode version String: %s \n",dev->name,ver_str);
+ printk(KERN_INFO "%s: Microcode version String: %s\n",dev->name,ver_str);
}
/*
skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ;
if (skb==NULL) { /* Still need to fix the rx ring */
- printk(KERN_WARNING "%s: dev_alloc_skb failed in rx, single buffer \n",dev->name) ;
+ printk(KERN_WARNING "%s: dev_alloc_skb failed in rx, single buffer\n",dev->name);
adv_rx_ring(dev) ;
dev->stats.rx_dropped++ ;
writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ;
*/
if (intstatus == 0x0001) {
writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
- printk(KERN_INFO "%s: 00001 int received \n",dev->name) ;
+ printk(KERN_INFO "%s: 00001 int received\n",dev->name);
} else {
if (intstatus & (HOSTERRINT | SRBRINT | ARBCINT | UPCOMPINT | DNCOMPINT | HARDERRINT | (1<<8) | TXUNDERRUN | ASBFINT)) {
*/
if (intstatus & HOSTERRINT) {
- printk(KERN_WARNING "%s: Host Error, performing global reset, intstatus = %04x \n",dev->name,intstatus) ;
+ printk(KERN_WARNING "%s: Host Error, performing global reset, intstatus = %04x\n",dev->name,intstatus);
writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ;
- printk(KERN_WARNING "%s: Resetting hardware: \n", dev->name);
+ printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name);
netif_stop_queue(dev) ;
xl_freemem(dev) ;
free_irq(dev->irq,dev);
Must put a timeout check here ! */
/* Empty Loop */
}
- printk(KERN_WARNING "%s: TX Underrun received \n",dev->name) ;
+ printk(KERN_WARNING "%s: TX Underrun received\n",dev->name);
writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
} /* TxUnderRun */
macstatus = readw(xl_mmio + MMIO_MACDATA) ;
printk(KERN_WARNING "%s: MacStatusError, details: ", dev->name);
if (macstatus & (1<<14))
- printk(KERN_WARNING "tchk error: Unrecoverable error \n") ;
+ printk(KERN_WARNING "tchk error: Unrecoverable error\n");
if (macstatus & (1<<3))
- printk(KERN_WARNING "eint error: Internal watchdog timer expired \n") ;
+ printk(KERN_WARNING "eint error: Internal watchdog timer expired\n");
if (macstatus & (1<<2))
- printk(KERN_WARNING "aint error: Host tried to perform invalid operation \n") ;
+ printk(KERN_WARNING "aint error: Host tried to perform invalid operation\n");
printk(KERN_WARNING "Instatus = %02x, macstatus = %02x\n",intstatus,macstatus) ;
- printk(KERN_WARNING "%s: Resetting hardware: \n", dev->name);
+ printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name);
netif_stop_queue(dev) ;
xl_freemem(dev) ;
free_irq(dev->irq,dev);
return IRQ_HANDLED;
}
} else {
- printk(KERN_WARNING "%s: Received Unknown interrupt : %04x \n", dev->name, intstatus) ;
+ printk(KERN_WARNING "%s: Received Unknown interrupt : %04x\n", dev->name, intstatus);
writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
}
}
writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD);
if (readb(xl_mmio + MMIO_MACDATA) != CLOSE_NIC) {
- printk(KERN_INFO "%s: CLOSE_NIC did not get a CLOSE_NIC response \n",dev->name) ;
+ printk(KERN_INFO "%s: CLOSE_NIC did not get a CLOSE_NIC response\n",dev->name);
} else {
writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ;
if (readb(xl_mmio + MMIO_MACDATA)==0) {
- printk(KERN_INFO "%s: Adapter has been closed \n",dev->name) ;
+ printk(KERN_INFO "%s: Adapter has been closed\n",dev->name);
writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ;
xl_freemem(dev) ;
printk(KERN_INFO "%s: Command: %d - Invalid Command code\n",dev->name,srb_cmd) ;
break ;
case 4:
- printk(KERN_INFO "%s: Command: %d - Adapter is closed, must be open for this command \n",dev->name,srb_cmd) ;
+ printk(KERN_INFO "%s: Command: %d - Adapter is closed, must be open for this command\n",dev->name,srb_cmd);
break ;
case 6:
- printk(KERN_INFO "%s: Command: %d - Options Invalid for command \n",dev->name,srb_cmd) ;
+ printk(KERN_INFO "%s: Command: %d - Options Invalid for command\n",dev->name,srb_cmd);
break ;
case 0: /* Successful command execution */
break ;
case SET_FUNC_ADDRESS:
if(xl_priv->xl_message_level)
- printk(KERN_INFO "%s: Functional Address Set \n",dev->name) ;
+ printk(KERN_INFO "%s: Functional Address Set\n",dev->name);
break ;
case CLOSE_NIC:
if(xl_priv->xl_message_level)
- printk(KERN_INFO "%s: Received CLOSE_NIC interrupt in interrupt handler \n",dev->name) ;
+ printk(KERN_INFO "%s: Received CLOSE_NIC interrupt in interrupt handler\n",dev->name);
break ;
case SET_MULTICAST_MODE:
if(xl_priv->xl_message_level)
case SET_RECEIVE_MODE:
if(xl_priv->xl_message_level) {
if (xl_priv->xl_copy_all_options == 0x0004)
- printk(KERN_INFO "%s: Entering promiscuous mode \n", dev->name) ;
+ printk(KERN_INFO "%s: Entering promiscuous mode\n", dev->name);
else
- printk(KERN_INFO "%s: Entering normal receive mode \n",dev->name) ;
+ printk(KERN_INFO "%s: Entering normal receive mode\n",dev->name);
}
break ;
xl_freemem(dev) ;
free_irq(dev->irq,dev);
- printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ;
+ printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name);
} /* If serious error */
if (xl_priv->xl_message_level) {
if (lan_status_diff & LSC_SIG_LOSS)
- printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ;
+ printk(KERN_WARNING "%s: No receive signal detected\n", dev->name);
if (lan_status_diff & LSC_HARD_ERR)
- printk(KERN_INFO "%s: Beaconing \n",dev->name);
+ printk(KERN_INFO "%s: Beaconing\n",dev->name);
if (lan_status_diff & LSC_SOFT_ERR)
- printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name);
+ printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
if (lan_status_diff & LSC_TRAN_BCN)
printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
if (lan_status_diff & LSC_SS)
- printk(KERN_INFO "%s: Single Station on the ring \n", dev->name);
+ printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
if (lan_status_diff & LSC_RING_REC)
printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
if (lan_status_diff & LSC_FDX_MODE)
if (lan_status_diff & LSC_CO) {
if (xl_priv->xl_message_level)
- printk(KERN_INFO "%s: Counter Overflow \n", dev->name);
+ printk(KERN_INFO "%s: Counter Overflow\n", dev->name);
/* Issue READ.LOG command */
xl_srb_cmd(dev, READ_LOG) ;
}
} /* Lan.change.status */
else if ( arb_cmd == RECEIVE_DATA) { /* Received.Data */
#if XL_DEBUG
- printk(KERN_INFO "Received.Data \n") ;
+ printk(KERN_INFO "Received.Data\n");
#endif
writel( ((MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ;
xl_priv->mac_buffer = swab16(readw(xl_mmio + MMIO_MACDATA)) ;
xl_asb_cmd(dev) ;
} else {
- printk(KERN_WARNING "%s: Received unknown arb (xl_priv) command: %02x \n",dev->name,arb_cmd) ;
+ printk(KERN_WARNING "%s: Received unknown arb (xl_priv) command: %02x\n",dev->name,arb_cmd);
}
/* Acknowledge the arb interrupt */
ret_code = readb(xl_mmio + MMIO_MACDATA) ;
switch (ret_code) {
case 0x01:
- printk(KERN_INFO "%s: ASB Command, unrecognized command code \n",dev->name) ;
+ printk(KERN_INFO "%s: ASB Command, unrecognized command code\n",dev->name);
break ;
case 0x26:
- printk(KERN_INFO "%s: ASB Command, unexpected receive buffer \n", dev->name) ;
+ printk(KERN_INFO "%s: ASB Command, unexpected receive buffer\n", dev->name);
break ;
case 0x40:
- printk(KERN_INFO "%s: ASB Command, Invalid Station ID \n", dev->name) ;
+ printk(KERN_INFO "%s: ASB Command, Invalid Station ID\n", dev->name);
break ;
}
xl_priv->asb_queued = 0 ;
pcr |= PCI_COMMAND_SERR;
pci_write_config_word (pdev, PCI_COMMAND, pcr);
- printk("%s \n", version);
+ printk("%s\n", version);
printk("%s: %s. I/O at %hx, MMIO at %p, using irq %d\n",dev->name,
streamer_priv->streamer_card_name,
(unsigned int) dev->base_addr,
#if STREAMER_DEBUG
writew(readw(streamer_mmio + LAPWWO),
streamer_mmio + LAPA);
- printk("srb open request: \n");
+ printk("srb open request:\n");
for (i = 0; i < 16; i++) {
printk("%x:", ntohs(readw(streamer_mmio + LAPDINC)));
}
if (srb_word != 0) {
if (srb_word == 0x07) {
if (!streamer_priv->streamer_ring_speed && open_finished) { /* Autosense , first time around */
- printk(KERN_WARNING "%s: Retrying at different ring speed \n",
+ printk(KERN_WARNING "%s: Retrying at different ring speed\n",
dev->name);
open_finished = 0;
} else {
((error_code & 0x0f) == 0x0d))
{
printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n", dev->name);
- printk(KERN_WARNING "%s: Please try again with a specified ring speed \n", dev->name);
+ printk(KERN_WARNING "%s: Please try again with a specified ring speed\n", dev->name);
free_irq(dev->irq, dev);
return -EIO;
}
if (rx_desc->status & 0x7E830000) { /* errors */
if (streamer_priv->streamer_message_level) {
- printk(KERN_WARNING "%s: Rx Error %x \n",
+ printk(KERN_WARNING "%s: Rx Error %x\n",
dev->name, rx_desc->status);
}
} else { /* received without errors */
if (skb == NULL)
{
- printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n", dev->name);
+ printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers.\n", dev->name);
dev->stats.rx_dropped++;
} else { /* we allocated an skb OK */
if (buffer_cnt == 1) {
case 0x00:
break;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name);
+ printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
break;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name);
case 0x00:
break;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n", dev->name);
+ printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name);
break;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name);
break;
case 0x39: /* Must deal with this if individual multicast addresses used */
- printk(KERN_INFO "%s: Group address not found \n", dev->name);
+ printk(KERN_INFO "%s: Group address not found\n", dev->name);
break;
default:
break;
switch (srb_word) {
case 0x00:
if (streamer_priv->streamer_message_level)
- printk(KERN_INFO "%s: Functional Address Mask Set \n", dev->name);
+ printk(KERN_INFO "%s: Functional Address Mask Set\n", dev->name);
break;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n", dev->name);
+ printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name);
break;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name);
}
break;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n", dev->name);
+ printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name);
break;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name);
printk(KERN_INFO "%s: Read Source Routing Counters issued\n", dev->name);
break;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n", dev->name);
+ printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name);
break;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name);
(streamer_mmio + LAPDINC)));
}
- printk("next %04x, fs %02x, len %04x \n", next,
+ printk("next %04x, fs %02x, len %04x\n", next,
status, len);
}
#endif
mac_frame->protocol = tr_type_trans(mac_frame, dev);
#if STREAMER_NETWORK_MONITOR
- printk(KERN_WARNING "%s: Received MAC Frame, details: \n",
+ printk(KERN_WARNING "%s: Received MAC Frame, details:\n",
dev->name);
mac_hdr = tr_hdr(mac_frame);
printk(KERN_WARNING
/* If serious error */
if (streamer_priv->streamer_message_level) {
if (lan_status_diff & LSC_SIG_LOSS)
- printk(KERN_WARNING "%s: No receive signal detected \n", dev->name);
+ printk(KERN_WARNING "%s: No receive signal detected\n", dev->name);
if (lan_status_diff & LSC_HARD_ERR)
- printk(KERN_INFO "%s: Beaconing \n", dev->name);
+ printk(KERN_INFO "%s: Beaconing\n", dev->name);
if (lan_status_diff & LSC_SOFT_ERR)
- printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n", dev->name);
+ printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n", dev->name);
if (lan_status_diff & LSC_TRAN_BCN)
printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n", dev->name);
if (lan_status_diff & LSC_SS)
- printk(KERN_INFO "%s: Single Station on the ring \n", dev->name);
+ printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
if (lan_status_diff & LSC_RING_REC)
printk(KERN_INFO "%s: Ring recovery ongoing\n", dev->name);
if (lan_status_diff & LSC_FDX_MODE)
if (lan_status_diff & LSC_CO) {
if (streamer_priv->streamer_message_level)
- printk(KERN_INFO "%s: Counter Overflow \n", dev->name);
+ printk(KERN_INFO "%s: Counter Overflow\n", dev->name);
/* Issue READ.LOG command */
streamer_priv->streamer_lan_status = lan_status;
} /* Lan.change.status */
else
- printk(KERN_WARNING "%s: Unknown arb command \n", dev->name);
+ printk(KERN_WARNING "%s: Unknown arb command\n", dev->name);
}
static void streamer_asb_bh(struct net_device *dev)
rc=ntohs(readw(streamer_mmio+LAPD)) >> 8;
switch (rc) {
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized command code \n", dev->name);
+ printk(KERN_WARNING "%s: Unrecognized command code\n", dev->name);
break;
case 0x26:
- printk(KERN_WARNING "%s: Unrecognized buffer address \n", dev->name);
+ printk(KERN_WARNING "%s: Unrecognized buffer address\n", dev->name);
break;
case 0xFF:
/* Valid response, everything should be ok again */
olympic_priv=netdev_priv(dev);
olympic_mmio=olympic_priv->olympic_mmio;
- printk("%s \n", version);
+ printk("%s\n", version);
printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv->olympic_card_name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq);
writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL);
#if OLYMPIC_DEBUG
printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA));
printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK));
- printk("Before the open command \n");
+ printk("Before the open command\n");
#endif
do {
memset_io(init_srb,0,SRB_COMMAND_SIZE);
break;
}
if (time_after(jiffies, t + 10*HZ)) {
- printk(KERN_WARNING "%s: SRB timed out. \n",dev->name) ;
+ printk(KERN_WARNING "%s: SRB timed out.\n",dev->name);
olympic_priv->srb_queued=0;
break ;
}
break;
case 0x07:
if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */
- printk(KERN_WARNING "%s: Retrying at different ring speed \n", dev->name);
+ printk(KERN_WARNING "%s: Retrying at different ring speed\n", dev->name);
open_finished = 0 ;
continue;
}
if (!olympic_priv->olympic_ring_speed && ((err & 0x0f) == 0x0d)) {
printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name);
- printk(KERN_WARNING "%s: Please try again with a specified ring speed \n",dev->name);
+ printk(KERN_WARNING "%s: Please try again with a specified ring speed\n",dev->name);
} else {
printk(KERN_WARNING "%s: %s - %s\n", dev->name,
open_maj_error[(err & 0xf0) >> 4],
olympic_priv->rx_status_last_received++ ;
olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1);
#if OLYMPIC_DEBUG
- printk("rx status: %x rx len: %x \n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen));
+ printk("rx status: %x rx len: %x\n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen));
#endif
length = le32_to_cpu(rx_status->fragmentcnt_framelen) & 0xffff;
buffer_cnt = le32_to_cpu(rx_status->status_buffercnt) & 0xffff;
if (l_status_buffercnt & 0x3B000000) {
if (olympic_priv->olympic_message_level) {
if (l_status_buffercnt & (1<<29)) /* Rx Frame Truncated */
- printk(KERN_WARNING "%s: Rx Frame Truncated \n",dev->name);
+ printk(KERN_WARNING "%s: Rx Frame Truncated\n",dev->name);
if (l_status_buffercnt & (1<<28)) /*Rx receive overrun */
- printk(KERN_WARNING "%s: Rx Frame Receive overrun \n",dev->name);
+ printk(KERN_WARNING "%s: Rx Frame Receive overrun\n",dev->name);
if (l_status_buffercnt & (1<<27)) /* No receive buffers */
- printk(KERN_WARNING "%s: No receive buffers \n",dev->name);
+ printk(KERN_WARNING "%s: No receive buffers\n",dev->name);
if (l_status_buffercnt & (1<<25)) /* Receive frame error detect */
- printk(KERN_WARNING "%s: Receive frame error detect \n",dev->name);
+ printk(KERN_WARNING "%s: Receive frame error detect\n",dev->name);
if (l_status_buffercnt & (1<<24)) /* Received Error Detect */
- printk(KERN_WARNING "%s: Received Error Detect \n",dev->name);
+ printk(KERN_WARNING "%s: Received Error Detect\n",dev->name);
}
olympic_priv->rx_ring_last_received += i ;
olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ;
}
if (skb == NULL) {
- printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers. \n",dev->name) ;
+ printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers.\n",dev->name) ;
dev->stats.rx_dropped++;
/* Update counters even though we don't transfer the frame */
olympic_priv->rx_ring_last_received += i ;
}
if (t == 0) {
- printk(KERN_WARNING "%s: SRB timed out. May not be fatal. \n",dev->name) ;
+ printk(KERN_WARNING "%s: SRB timed out. May not be fatal.\n",dev->name);
}
olympic_priv->srb_queued=0;
}
case 0x00:
break ;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
break ;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name);
case 0x00:
break ;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
break ;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
break ;
case 0x39: /* Must deal with this if individual multicast addresses used */
- printk(KERN_INFO "%s: Group address not found \n",dev->name);
+ printk(KERN_INFO "%s: Group address not found\n",dev->name);
break ;
default:
break ;
switch (readb(srb+2)) {
case 0x00:
if (olympic_priv->olympic_message_level)
- printk(KERN_INFO "%s: Functional Address Mask Set \n",dev->name) ;
+ printk(KERN_INFO "%s: Functional Address Mask Set\n",dev->name);
break ;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
break ;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
printk(KERN_INFO "%s: Read Log issued\n",dev->name) ;
break ;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
break ;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ;
break ;
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized srb command \n",dev->name) ;
+ printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name);
break ;
case 0x04:
printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ;
printk("Loc %d = %02x\n",i,readb(frame_data + i));
}
- printk("next %04x, fs %02x, len %04x \n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length)));
+ printk("next %04x, fs %02x, len %04x\n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length)));
}
#endif
mac_frame = dev_alloc_skb(frame_len) ;
if (olympic_priv->olympic_network_monitor) {
struct trh_hdr *mac_hdr;
- printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name);
+ printk(KERN_WARNING "%s: Received MAC Frame, details:\n",dev->name);
mac_hdr = tr_hdr(mac_frame);
printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %pM\n",
dev->name, mac_hdr->daddr);
writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL);
netif_stop_queue(dev);
olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ;
- printk(KERN_WARNING "%s: Adapter has been closed \n", dev->name) ;
+ printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name);
} /* If serious error */
if (olympic_priv->olympic_message_level) {
if (lan_status_diff & LSC_SIG_LOSS)
- printk(KERN_WARNING "%s: No receive signal detected \n", dev->name) ;
+ printk(KERN_WARNING "%s: No receive signal detected\n", dev->name);
if (lan_status_diff & LSC_HARD_ERR)
- printk(KERN_INFO "%s: Beaconing \n",dev->name);
+ printk(KERN_INFO "%s: Beaconing\n",dev->name);
if (lan_status_diff & LSC_SOFT_ERR)
- printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame \n",dev->name);
+ printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
if (lan_status_diff & LSC_TRAN_BCN)
printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
if (lan_status_diff & LSC_SS)
- printk(KERN_INFO "%s: Single Station on the ring \n", dev->name);
+ printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
if (lan_status_diff & LSC_RING_REC)
printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name);
if (lan_status_diff & LSC_FDX_MODE)
if (lan_status_diff & LSC_CO) {
if (olympic_priv->olympic_message_level)
- printk(KERN_INFO "%s: Counter Overflow \n", dev->name);
+ printk(KERN_INFO "%s: Counter Overflow\n", dev->name);
/* Issue READ.LOG command */
} /* Lan.change.status */
else
- printk(KERN_WARNING "%s: Unknown arb command \n", dev->name);
+ printk(KERN_WARNING "%s: Unknown arb command\n", dev->name);
}
static void olympic_asb_bh(struct net_device *dev)
if (olympic_priv->asb_queued == 2) {
switch (readb(asb_block+2)) {
case 0x01:
- printk(KERN_WARNING "%s: Unrecognized command code \n", dev->name);
+ printk(KERN_WARNING "%s: Unrecognized command code\n", dev->name);
break ;
case 0x26:
- printk(KERN_WARNING "%s: Unrecognized buffer address \n", dev->name);
+ printk(KERN_WARNING "%s: Unrecognized buffer address\n", dev->name);
break ;
case 0xFF:
/* Valid response, everything should be ok again */
Status &= STS_MASK;
if(tms380tr_debug > 3)
- printk(KERN_DEBUG " %04X \n", Status);
+ printk(KERN_DEBUG " %04X\n", Status);
/* BUD successfully completed */
if(Status == STS_INITIALIZE)
return (1);
break;
case DMA_WRITE_ABORT:
- printk(KERN_INFO "%s: DMA write operation aborted: \n",
+ printk(KERN_INFO "%s: DMA write operation aborted:\n",
dev->name);
switch (AdapterCheckBlock[1])
{
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / commitdiff