staging/serqt_usb2: fixed line over issue in serqt_usb2.c
authorYAMANE Toshiaki <yamanetoshi@gmail.com>
Fri, 9 Nov 2012 21:33:02 +0000 (06:33 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 13 Nov 2012 21:15:24 +0000 (13:15 -0800)
Fixed a description of the procedure call dev_dbg().

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/serqt_usb2/serqt_usb2.c

index 099bc69ca00c2d3bea1c9c9d7c2e56cd66a56f88..9bc8923f79575765a8e64e8326ac575734cde01b 100644 (file)
@@ -272,7 +272,8 @@ static void qt_write_bulk_callback(struct urb *urb)
        status = urb->status;
 
        if (status) {
-               dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status);
+               dev_dbg(&urb->dev->dev,
+                       "nonzero write bulk status received:%d\n", status);
                return;
        }
 
@@ -321,7 +322,8 @@ static void qt_read_bulk_callback(struct urb *urb)
        /* index = MINOR(port->tty->device) - serial->minor; */
        index = tty->index - serial->minor;
 
-       dev_dbg(&port->dev, "%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
+       dev_dbg(&port->dev,
+               "%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding);
 
        if (port_paranoia_check(port, __func__) != 0) {
                qt_port->ReadBulkStopped = 1;
@@ -333,7 +335,8 @@ static void qt_read_bulk_callback(struct urb *urb)
 
        if (qt_port->closePending == 1) {
                /* Were closing , stop reading */
-               dev_dbg(&port->dev, "%s - (qt_port->closepending == 1\n", __func__);
+               dev_dbg(&port->dev,
+                       "%s - (qt_port->closepending == 1\n", __func__);
                qt_port->ReadBulkStopped = 1;
                goto exit;
        }
@@ -912,10 +915,14 @@ static int qt_open(struct tty_struct *tty,
 
        dev_dbg(&port->dev, "port number is %d\n", port->number);
        dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
-       dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
-       dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
-       dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
-       dev_dbg(&port->dev, "port's number in the device is %d\n", quatech_port->port_num);
+       dev_dbg(&port->dev,
+               "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+       dev_dbg(&port->dev,
+               "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
+       dev_dbg(&port->dev, "Interrupt endpoint is %d\n",
+               port->interrupt_in_endpointAddress);
+       dev_dbg(&port->dev, "port's number in the device is %d\n",
+               quatech_port->port_num);
        quatech_port->read_urb = port->read_urb;
 
        /* set up our bulk in urb */
@@ -928,7 +935,8 @@ static int qt_open(struct tty_struct *tty,
                          quatech_port->read_urb->transfer_buffer_length,
                          qt_read_bulk_callback, quatech_port);
 
-       dev_dbg(&port->dev, "qt_open: bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+       dev_dbg(&port->dev, "qt_open: bulkin endpoint is %d\n",
+               port->bulk_in_endpointAddress);
        quatech_port->read_urb_busy = true;
        result = usb_submit_urb(quatech_port->read_urb, GFP_KERNEL);
        if (result) {
@@ -1021,15 +1029,18 @@ static void qt_close(struct usb_serial_port *port)
        /* Close uart channel */
        status = qt_close_channel(serial, index);
        if (status < 0)
-               dev_dbg(&port->dev, "%s - port %d qt_close_channel failed.\n", __func__, port->number);
+               dev_dbg(&port->dev,
+                       "%s - port %d qt_close_channel failed.\n",
+                       __func__, port->number);
 
        port0->open_ports--;
 
-       dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n", port0->open_ports, port->number);
+       dev_dbg(&port->dev, "qt_num_open_ports in close%d:in port%d\n",
+               port0->open_ports, port->number);
 
        if (port0->open_ports == 0) {
                if (serial->port[0]->interrupt_in_urb) {
-                       dev_dbg(&port->dev, "%s", "Shutdown interrupt_in_urb\n");
+                       dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
                        usb_kill_urb(serial->port[0]->interrupt_in_urb);
                }
 
@@ -1053,7 +1064,8 @@ static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
                return -ENODEV;
 
        if (count == 0) {
-               dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
+               dev_dbg(&port->dev,
+                       "%s - write request of 0 bytes\n", __func__);
                return 0;
        }
 
@@ -1080,7 +1092,8 @@ static int qt_write(struct tty_struct *tty, struct usb_serial_port *port,
                /* send the data out the bulk port */
                result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
                if (result)
-                       dev_dbg(&port->dev, "%s - failed submitting write urb, error %d\n",
+                       dev_dbg(&port->dev,
+                               "%s - failed submitting write urb, error %d\n",
                                __func__, result);
                else
                        result = count;
@@ -1163,7 +1176,8 @@ static int qt_ioctl(struct tty_struct *tty,
                return 0;
        }
 
-       dev_dbg(&port->dev, "%s -No ioctl for that one.  port = %d\n", __func__, port->number);
+       dev_dbg(&port->dev, "%s -No ioctl for that one.  port = %d\n",
+               __func__, port->number);
        return -ENOIOCTLCMD;
 }
 
@@ -1238,7 +1252,8 @@ static void qt_set_termios(struct tty_struct *tty,
 
        /* Now determine flow control */
        if (cflag & CRTSCTS) {
-               dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n", __func__, port->number);
+               dev_dbg(&port->dev, "%s - Enabling HW flow control port %d\n",
+                       __func__, port->number);
 
                /* Enable RTS/CTS flow control */
                status = BoxSetHW_FlowCtrl(port->serial, index, 1);
@@ -1249,7 +1264,9 @@ static void qt_set_termios(struct tty_struct *tty,
                }
        } else {
                /* Disable RTS/CTS flow control */
-               dev_dbg(&port->dev, "%s - disabling HW flow control port %d\n", __func__, port->number);
+               dev_dbg(&port->dev,
+                       "%s - disabling HW flow control port %d\n",
+                       __func__, port->number);
 
                status = BoxSetHW_FlowCtrl(port->serial, index, 0);
                if (status < 0) {
@@ -1268,17 +1285,21 @@ static void qt_set_termios(struct tty_struct *tty,
                    BoxSetSW_FlowCtrl(port->serial, index, stop_char,
                                      start_char);
                if (status < 0)
-                       dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (enabled) failed\n");
+                       dev_dbg(&port->dev,
+                               "BoxSetSW_FlowCtrl (enabled) failed\n");
 
        } else {
                /* disable SW flow control */
                status = BoxDisable_SW_FlowCtrl(port->serial, index);
                if (status < 0)
-                       dev_dbg(&port->dev, "BoxSetSW_FlowCtrl (diabling) failed\n");
+                       dev_dbg(&port->dev,
+                               "BoxSetSW_FlowCtrl (diabling) failed\n");
 
        }
        termios->c_cflag &= ~CMSPAR;
-       /* FIXME: Error cases should be returning the actual bits changed only */
+       /* FIXME:
+          Error cases should be returning the actual bits changed only
+       */
 }
 
 static void qt_break(struct tty_struct *tty, int break_state)