FB: sa11x0: convert shannon display enable accesses to use GPIO subsystem
authorRussell King <rmk+kernel@arm.linux.org.uk>
Wed, 18 Jan 2012 13:51:04 +0000 (13:51 +0000)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Tue, 21 Feb 2012 11:56:21 +0000 (11:56 +0000)
Rather than accessing GPSR and GPCR directly, use the GPIO subsystem
instead.

Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-sa1100/include/mach/shannon.h
drivers/video/sa1100fb.c

index ec27d6e121404e3aa781a8fd49499635ddf19cc1..a0d1114c45edd8b9a3ab886c2aa2bbeadc1a3282 100644 (file)
@@ -21,7 +21,7 @@
 #define SHANNON_GPIO_U3_RTS            GPIO_GPIO (19)  /* ?? */
 #define SHANNON_GPIO_U3_CTS            GPIO_GPIO (20)  /* ?? */
 #define SHANNON_GPIO_SENSE_12V         GPIO_GPIO (21)  /* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN           GPIO_GPIO (22)  /* out */
+#define SHANNON_GPIO_DISP_EN           22              /* out */
 /* XXX GPIO 23 unaccounted for */
 #define SHANNON_GPIO_EJECT_0           GPIO_GPIO (24)  /* in */
 #define SHANNON_IRQ_GPIO_EJECT_0       IRQ_GPIO24
index f3f55eb61ca132ae2933fabe389bd7c523755133..379b2c5000a30767eb81ba403c10e4a85fd4a78b 100644 (file)
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/mutex.h>
@@ -796,10 +797,8 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
        DBAR2 = fbi->dbar2;
        LCCR0 |= LCCR0_LEN;
 
-       if (machine_is_shannon()) {
-               GPDR |= SHANNON_GPIO_DISP_EN;
-               GPSR = SHANNON_GPIO_DISP_EN;
-       }
+       if (machine_is_shannon())
+               gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
 
        dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1);
        dev_dbg(fbi->dev, "DBAR2 = 0x%08lx\n", DBAR2);
@@ -815,9 +814,8 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 
        dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
-       if (machine_is_shannon()) {
-               GPCR = SHANNON_GPIO_DISP_EN;
-       }       
+       if (machine_is_shannon())
+               gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
 
        set_current_state(TASK_UNINTERRUPTIBLE);
        add_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1230,6 +1228,13 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
                goto failed;
        }
 
+       if (machine_is_shannon()) {
+               ret = gpio_request_one(SHANNON_GPIO_DISP_EN,
+                       GPIOF_OUT_INIT_LOW, "display enable");
+               if (ret)
+                       goto err_free_irq;
+       }
+
        /*
         * This makes sure that our colour bitfield
         * descriptors are correctly initialised.
@@ -1240,7 +1245,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 
        ret = register_framebuffer(&fbi->fb);
        if (ret < 0)
-               goto err_free_irq;
+               goto err_reg_fb;
 
 #ifdef CONFIG_CPU_FREQ
        fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
@@ -1252,6 +1257,9 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
        /* This driver cannot be unloaded at the moment */
        return 0;
 
+ err_reg_fb:
+       if (machine_is_shannon())
+               gpio_free(SHANNON_GPIO_DISP_EN);
  err_free_irq:
        free_irq(irq, fbi);
  failed: